Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A fully assembled RS232 to TTL shifter that works with 2.8V to 5V logic and supports baud rates up to 115200 bps. On-board TX and RX LEDs make it easy to confirm data flow during setup.

Key Highlights

  • Converts RS232 to TTL and TTL to RS232
  • Wide supply voltage range: 2.8V to 5V
  • Supports baud rates from 300 to 115200 bps
  • TX and RX LED indicators for activity monitoring
  • Solderable 4-pin headers for flexible connections
  • Fully assembled SMD board, compact and lightweight

Ideal For

  • Electronics hobbyists connecting microcontrollers to RS232 devices
  • Students learning serial communication and level shifting
  • Engineers integrating legacy RS232 equipment with modern logic
  • Makers building projects that require TTL to RS232 conversion
  • Technicians troubleshooting serial links with TX/RX indicators

Buying Tip

Confirm that your logic supply is within 2.8V to 5V and that your target baud rate is between 300 and 115200 bps before purchasing.

Elecvora expert review

Our verdict

The SmartElex RS232 Shifter SMD is a practical, no-fuss solution for RS232-to-TTL conversion. Its wide voltage range and activity LEDs make it a reliable choice for prototyping and integration work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fully assembled and ready to wire
  • Supports both 2.8V and 5V logic
  • TX/RX LEDs aid troubleshooting
  • Compact SMD form factor

Cons

  • Requires soldering to headers
  • No enclosure or mounting holes
  • Limited to baud rates up to 115200 bps

Best for

Hobbyists and professionals needing a simple RS232-to-TTL interface for serial communication.

Not ideal for

Those requiring baud rates above 115200 bps or pre-wired connectors.

Specifications

Supply Voltage2.8 to 5
Baud Rate (bps)300 to 115200
LED IndicatorTX and RX
Shipping Weight0.01 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x SmartElex RS232 Shifter - SMD

Frequently Asked Questions

What does the SmartElex RS232 Shifter SMD do?
It converts RS232 signal levels to TTL logic levels and converts TTL back to RS232, enabling communication between RS232 devices and TTL-based microcontrollers or development boards.
What supply voltage does the board require?
The board operates from a supply voltage between 2.8V and 5V.
What baud rates are supported?
It supports baud rates from 300 bps to 115200 bps.
Does the board come assembled?
Yes, the SMD board is fully assembled. You only need to solder wires or connectors to the 4-pin headers.
What is included in the package?
The package includes one SmartElex RS232 Shifter - SMD board.
How do I know if data is being transmitted or received?
The on-board TX and RX LEDs light up to indicate activity on the transmit and receive lines, helping you confirm data flow.

Overview

The SmartElex RS232 Shifter SMD is a compact, fully assembled circuit board that converts RS232 signal levels to TTL logic levels and converts TTL back to RS232. It bridges the gap between microcontrollers, development boards, and RS232-enabled devices such as computers or industrial equipment. Because the board accepts a supply voltage from 2.8V to 5V, it can be used with both 5V and 2.8V CMOS logic systems without adding extra level-shifting components.

Key Features

  • Bidirectional conversion: Translates RS232 to TTL and TTL to RS232 for two-way serial communication.
  • Flexible voltage support: Operates from 2.8V to 5V, suiting a range of logic levels.
  • Wide baud rate range: Handles serial speeds from 300 bps up to 115200 bps.
  • Visual feedback: TX and RX LEDs indicate data activity on the transmit and receive lines.
  • Solderable headers: 4-pin headers allow secure, flexible wiring for permanent or prototyping setups.
  • Ready to use: The SMD board is fully assembled and compact, fitting easily into small enclosures or breadboard projects.

Specifications Explained

The supply voltage range of 2.8V to 5V means the board can be powered from common logic supplies, including 3.3V and 5V systems. This flexibility helps when mixing devices with different logic levels. The supported baud rate range of 300 bps to 115200 bps covers most standard serial communication needs, from slow legacy equipment to faster microcontroller links. The TX and RX LEDs are useful during development: they show when data is being transmitted or received, which simplifies debugging and confirms that the connection is active. The 4-pin headers are solderable, so you can attach wires or connectors permanently for reliable connections.

Compatibility and Requirements

The board is designed for RS232-to-TTL conversion and requires a supply voltage within 2.8V to 5V. It works with TTL logic levels commonly used by microcontrollers and development boards. No additional components are needed for basic operation, but you will need to provide power and make the necessary connections to your RS232 device and TTL device. The board is fully assembled; only wiring and soldering to the headers are required.

Typical Uses

  • Connecting a microcontroller to a computer or RS232 port for serial communication.
  • Programming or debugging devices that use RS232 interfaces.
  • Integrating legacy RS232 equipment with modern TTL-based systems.
  • Educational projects and prototyping that require serial data exchange.
  • Adding RS232 connectivity to projects with 2.8V or 5V logic.

What's in the Box

1 x SmartElex RS232 Shifter - SMD

Quick specs

Supply Voltage
2.8 to 5
Baud Rate (bps)
300 to 115200
LED Indicator
TX and RX
Shipping Weight
0.01 kg
Shipping Dimensions
6 × 5 × 3 cm
See all specifications