Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5-channel analog IR sensor that gives continuous reflectance readings for precise line detection in robots. Its 10–50 mm range and 16 mm detector spacing make it ideal for line-following and path-tracking projects.

Key Highlights

  • Five analog output channels for finer line position data
  • Infrared reflectance sensing distinguishes light and dark surfaces
  • Detection distance from 10 mm to 50 mm
  • 16 mm spacing between adjacent detectors
  • Runs on 3.3 V to 5 V systems
  • Compact 78 × 20 mm board weighs only 13 g

Ideal For

  • Students building line-following robots for competitions
  • Hobbyists creating maze-solving robots
  • Makers using Arduino or Raspberry Pi for automation projects
  • Educators teaching analog sensor feedback
  • Robotics enthusiasts needing precise path tracking

Buying Tip

Check that your controller has at least five analog input pins available, since the sensor provides five separate analog outputs.

Elecvora expert review

Our verdict

The SmartElex Tracker Sensor offers a useful step up from basic digital line sensors by providing analog feedback on each of its five channels. It is a practical, lightweight option for robotics projects that need more nuanced line detection.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Analog outputs allow proportional control and finer tuning
  • Five channels give good coverage for line following
  • Wide 3.3–5 V compatibility suits many development boards
  • Compact and lightweight board

Cons

  • Requires a controller with analog inputs
  • No mounting holes or hardware included
  • Detection distance is limited to 10–50 mm, so mounting height matters

Best for

Line-following and maze-solving robots that benefit from analog sensor feedback

Not ideal for

Projects that only have digital inputs or need detection beyond 50 mm

Specifications

Item TypeSensor
Model No. / NameTracker Sensor
Detection Distance (mm)10 – 50
SpacingDetected Space : 16mm
Length (mm)78
Width (mm)20
Weight (g)13
Shipping Weight0.02 kg
Shipping Dimensions19 × 6 × 2 cm

What's in the box

  • 1 x SmartElex Tracker Sensor
  • 1 x 7 Pin Cable Interface

Frequently Asked Questions

What is the difference between this sensor and a digital line tracker?
This sensor provides analog outputs that change continuously with reflectance, while digital sensors only give a HIGH or LOW signal. The analog values allow more precise line position detection.
Can I use this sensor with an Arduino or Raspberry Pi?
Yes, it is compatible with 3.3 V to 5 V systems including Arduino and Raspberry Pi, provided your board has analog input pins to read the five channels.
What is the detection distance and spacing?
The sensor detects surfaces at a distance of 10 mm to 50 mm, and the five detectors are spaced 16 mm apart.
What is included in the package?
The package includes one SmartElex Tracker Sensor and one 7-pin cable interface.
How should I mount the sensor?
Mount the sensor so the detectors face the floor at a height within the 10–50 mm range. Avoid direct sunlight or strong ambient IR sources that could affect readings.
Does the sensor work on both white and black surfaces?
Yes, it detects differences in infrared reflectance. White surfaces produce higher output values, while black lines produce lower values.

Overview

The SmartElex Tracker Sensor is a five-channel analog infrared sensor designed for accurate line detection in robotics. Each of its five outputs delivers a continuous analog signal rather than a simple HIGH/LOW state, so your microcontroller can judge how far a line is from the centre of the sensor array. The board detects differences in infrared reflectance: white or light surfaces return a high output, while black lines return a low output. With a detection range of 10–50 mm and 16 mm spacing between detectors, it is a practical choice for line-following robots, maze solvers and path-tracking systems.

Key Features

  • Five analog output channels for precise tracking
  • Infrared reflectance-based sensing
  • Higher accuracy than digital-only sensors
  • Detects white and black surfaces with changing values
  • Detection range: 10 mm to 50 mm
  • Detector spacing: 16 mm
  • Compatible with 3.3 V to 5 V systems
  • Ideal for robotics and automation projects

Specifications Explained

Detection distance (10–50 mm): This is the height range at which the sensor reliably reads surface reflectance. Mounting it closer to the floor gives a stronger signal, but staying within this window ensures consistent results.

Detector spacing (16 mm): The five detectors are spaced 16 mm apart, so the array covers a useful width for typical line-following tracks. This spacing helps the robot detect when it is drifting off the line and correct its path.

Analog outputs: Instead of a binary signal, each channel provides a value that changes with reflectance. This lets you set thresholds in software or use proportional control for smoother line following.

Board size and weight: At 78 mm long, 20 mm wide and 13 g, the sensor adds little bulk or weight to small robots.

Compatibility and Requirements

The Tracker Sensor operates from 3.3 V to 5 V, making it suitable for common development boards such as Arduino and Raspberry Pi. It requires a controller with analog input pins to read the five output channels. A 7-pin cable is included for connecting the sensor to your board. No additional mounting hardware is supplied.

Typical Uses

  • Line-following robots for education and hobby projects
  • Maze-solving robots that need to detect and follow paths
  • Path-tracking systems in automation experiments
  • Projects that benefit from analog feedback for smoother control

What's in the Box

  • 1 x SmartElex Tracker Sensor
  • 1 x 7-pin cable interface

Quick specs

Item Type
Sensor
Model No. / Name
Tracker Sensor
Detection Distance (mm)
10 – 50
Spacing
Detected Space : 16mm
Length (mm)
78
Width (mm)
20
See all specifications