Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact UART to RS485 converter board that works with both 3.3V and 5V logic levels. Hardware auto-direction control switches between transmit and receive automatically, so no DE/RE pin coding is needed in your firmware.

Key Highlights

  • Converts TTL UART signals to RS485 differential signals
  • Supports both 3.3V and 5V logic levels
  • Hardware auto-direction control with no DE/RE coding
  • Works with Arduino, ESP32, STM32 and Raspberry Pi controllers
  • Compact 51.9 x 22.9 mm board weighing about 7 g
  • Suitable for Modbus RTU compatible networks

Ideal For

  • Makers building Modbus RTU sensor networks
  • Arduino and ESP32 users adding RS485 connectivity
  • Industrial automation and control system developers
  • Raspberry Pi and STM32 projects needing long-distance serial links
  • Students learning UART to RS485 interfacing

Buying Tip

Confirm your controller's logic level and UART pins before wiring, and check that your RS485 bus uses the same A/B line labelling as the board.

Elecvora expert review

Our verdict

A tidy, low-cost interface board that removes the usual DE/RE pin juggling from UART to RS485 projects. Its dual 3.3V and 5V logic support makes it easy to reuse across different controller families.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Hardware auto-direction control saves firmware work
  • Works with both 3.3V and 5V logic
  • Compact and lightweight for tight builds
  • Headers and connecting cable included
  • Modbus RTU compatible

Cons

  • No enclosure or mounting hardware listed
  • Requires soldering or header assembly for permanent wiring
  • RS485 termination and biasing details are not specified

Best for

Makers and engineers adding an RS485 port to Arduino, ESP32, STM32 or Raspberry Pi projects

Not ideal for

Users who need a fully enclosed, pre-wired industrial converter

Specifications

Item TypePower Supply Converter Board
Interface TypeUART (TTL) to RS485
Communication ProtocolRS485 (Modbus RTU compatible)
SupportedArduino, ESP32, STM32, Raspberry Pi Controller
Logic level3.3V / 5V Support
Length (mm)51.9
Width (mm)22.9
Weight (g)07
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.02 kg
Shipping Dimensions6 × 5 × 2 cm

What's in the box

  • 1 x SmartElex TTL to RS485 Power Supply Converter Board (3.3V / 5V, Auto Control)
  • 1 x 3-Pin Header
  • 1 x 4-Pin Header
  • 1 x 4 Pin connecting cable

Frequently Asked Questions

What does this board actually do?
It converts UART (TTL) serial signals from a microcontroller into RS485 differential signals. This allows communication over longer, noisier cable runs than plain TTL would allow.
Which controllers can I use it with?
The board is listed as supporting Arduino, ESP32, STM32 and Raspberry Pi controllers. It accepts both 3.3V and 5V logic levels.
Do I need to control the transmit and receive direction in code?
No. The board uses hardware auto-direction control, so you do not need to toggle DE/RE pins from your firmware.
Is it compatible with Modbus RTU?
Yes, the communication protocol is RS485 and is described as Modbus RTU compatible. Your controller still needs suitable Modbus software.
What comes in the package?
You receive one converter board, a 3-pin header, a 4-pin header and a 4-pin connecting cable.
How should I care for the board?
Keep it dry, avoid reversing the supply or bus polarity, and handle it by the edges to prevent static damage. Confirm voltage and wiring before powering up.

Overview

The SmartElex TTL to RS485 Power Supply Converter Board is a small interface module that turns ordinary UART (TTL) serial signals into RS485 differential signals. RS485 is the preferred physical layer for many industrial and distributed systems because a differential pair tolerates long cable runs and electrical noise far better than single-ended TTL lines. This board gives your microcontroller an RS485 port without a redesign.

Because the board accepts both 3.3V and 5V logic, it fits a wide range of controllers, including Arduino, ESP32, STM32 and Raspberry Pi boards. Hardware auto-direction control manages the transmit and receive switching internally, so you do not need to toggle DE/RE pins from firmware. That simplifies wiring and reduces the code you have to write and debug.

Key Features

  • UART to RS485 conversion: converts TTL serial signals into RS485 differential signals for more robust communication.
  • Dual logic support: operates with 3.3V and 5V logic-level controllers.
  • Hardware auto control: direction switching happens on the board, with no DE/RE coding required.
  • Modbus RTU compatible: suits RS485 networks built around the Modbus RTU protocol.
  • Compact footprint: measures 51.9 mm by 22.9 mm and weighs about 7 g for easy integration.
  • Tool-free installation: designed for easy replacement and quick project assembly.

Specifications Explained

The interface type is UART (TTL) to RS485, which means the board sits between your controller's serial pins and a two-wire RS485 bus. The communication protocol is RS485 and is described as Modbus RTU compatible, so it fits networks where that protocol is used.

Logic level support for both 3.3V and 5V is the detail most buyers should check first. It lets you use the same board with newer 3.3V boards and older 5V designs. The physical size of 51.9 mm by 22.9 mm and the 7 g weight make it simple to mount inside small enclosures or on prototype boards. Installation is described as tool-free and easy to replace, which helps when you are testing or swapping modules during development.

Compatibility and Requirements

The board is listed as supporting Arduino, ESP32, STM32 and Raspberry Pi controllers. It works with 3.3V and 5V logic levels. Your project will need a controller with a UART interface and an RS485 bus to connect to. The package includes a 3-pin header, a 4-pin header and a 4-pin connecting cable to help with wiring.

Typical Uses

  • Modbus RTU networks in automation and monitoring projects
  • Sensor data acquisition over longer cable runs
  • Distributed control systems with multiple nodes
  • Prototyping RS485 links on Arduino, ESP32, STM32 or Raspberry Pi
  • Industrial and electrically noisy environments needing sturdier serial communication

What's in the Box

  • 1 x SmartElex TTL to RS485 Power Supply Converter Board (3.3V / 5V, Auto Control)
  • 1 x 3-Pin Header
  • 1 x 4-Pin Header
  • 1 x 4 Pin connecting cable

Quick specs

Item Type
Power Supply Converter Board
Interface Type
UART (TTL) to RS485
Communication Protocol
RS485 (Modbus RTU compatible)
Supported
Arduino, ESP32, STM32, Raspberry Pi Controller
Logic level
3.3V / 5V Support
Length (mm)
51.9
See all specifications