
1 / 3 · Click to enlarge
AI Summary
A compact breakout board that exposes the VCC, D+, D- and GND pins of a USB mini-B connector on a standard 0.1 inch header. It makes USB power and data wiring possible without soldering directly to the tiny connector.
Key Highlights
- USB mini-B connector broken out to four labelled pins
- 5V voltage rating and 1.8A current rating
- Standard 0.1 inch header pitch for breadboards and PCBs
- Compact 15 x 12 mm board footprint
- Speeds up prototyping and legacy device wiring
- Lightweight at 0.05 kg shipping weight
Ideal For
- Makers prototyping USB-powered circuits on breadboards
- Students learning how USB power and data lines work
- Repair technicians adapting legacy mini-B devices
- Electronics hobbyists building custom wiring harnesses
- Engineers integrating USB connectivity into small PCBs
Buying Tip
Check that your project stays within the board's 5V and 1.8A rating, and confirm you already have a USB mini-B cable, since one is not included.
Elecvora expert review
Our verdict
A tidy, no-fuss breakout that saves time when you need USB mini-B signals on standard header pins. It is a simple part, but it does its job cleanly and takes up very little space.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Exposes all four essential USB mini-B signals
- Standard 0.1 inch pitch works with breadboards
- Very small 15 x 12 mm footprint
- Rated for 5V and 1.8A
Cons
- Cable and jumper wires are not included
- Limited to USB mini-B devices and 5V projects
Best for
Prototyping and legacy USB mini-B wiring projects
Not ideal for
Projects needing USB-C, micro-USB or higher voltage and current
Specifications
| Item Type | Breakout Module |
|---|---|
| Voltage Rating (V) | 5V |
| Current Rating (A) | 1.8 |
| Board Dimensions | 15 x 12 |
| Connector Type | USB mini-B |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x SmartElex USB Mini-B Breakout Module
Frequently Asked Questions
What pins does this breakout board expose?
Can I use it on a breadboard?
What voltage and current is it rated for?
Does it include a USB cable?
Which devices can I connect it to?
How should I care for the board?
Overview
The SmartElex USB Mini-B Breakout Module is a small adapter board built around a USB mini-B connector. Its purpose is simple: take the four signals that matter most in a USB connection and make them easy to reach. The VCC, D+, D- and GND pins are routed to a header with a standard 0.1 inch (2.54 mm) pitch, so you can plug in jumper wires or drop the board onto a breadboard instead of working with the connector's tiny solder tabs.
With a 5V voltage rating and a 1.8A current rating, the module suits typical USB power and data wiring tasks. The PCB measures only 15 x 12 mm, which keeps it out of the way in crowded enclosures and compact builds.
Key Features
- Four exposed signals: VCC, D+, D- and GND are brought out for direct access.
- Breadboard-friendly: the 0.1 inch header pitch matches common breadboards and prototyping boards.
- Small footprint: a 15 x 12 mm board that fits into tight spaces.
- Simple wiring: no need to solder wires onto the mini-B connector itself.
- Rated for 5V and 1.8A: suitable for standard USB power and data projects.
Specifications Explained
The 5V rating matches the voltage supplied by a standard USB port, so the board is designed for USB-level power rather than higher voltages. The 1.8A current rating indicates the load the board is specified for; keep your project within that figure to stay inside the stated rating.
The 15 x 12 mm board size matters when space is limited. The USB mini-B connector type is the older, smaller sibling of mini-B-era hardware, and the 0.1 inch header pitch is the de facto standard for breadboards, perfboard and many custom PCBs, which is what makes this board easy to integrate.
Compatibility and Requirements
The module is intended for devices and projects that use a USB mini-B connection. It exposes power and data lines only; it does not convert USB to another protocol and does not include a cable or a USB host. You will need your own jumper wires, a breadboard or PCB, and a suitable USB mini-B cable to connect to a host or device.
Typical Uses
- Prototyping USB-powered circuits on a breadboard.
- Wiring power and data from a mini-B port into a custom PCB.
- Adapting older cameras, portable electronics and legacy hardware.
- Repair and test setups where a mini-B connector needs to be tapped.
- Student and educational projects exploring USB signals.
What's in the Box
1 x SmartElex USB Mini-B Breakout Module.
Quick specs
- Item Type
- Breakout Module
- Voltage Rating (V)
- 5V
- Current Rating (A)
- 1.8
- Board Dimensions
- 15 x 12
- Connector Type
- USB mini-B
- Shipping Weight
- 0.05 kg
















