Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An add-on smoother board for stepper driver motors on FDM 3D printers. It softens stepped motor output to reduce vibration and noise, especially with DRV8825 and A4988 drivers.

Key Highlights

  • Add-on smoother board for stepper driver motors on FDM 3D printers
  • Helps reduce vibration and audible noise from stepper movement
  • Smooths motion, particularly noticeable on Delta-style printers
  • Works with DRV8825, A4988 and similar step-and-direction drivers
  • Free-run protection against induction stress in the unpowered state
  • Compact 40 × 30 mm board with a shipping weight of 0.04 kg

Ideal For

  • Delta-style 3D printer owners wanting smoother motion
  • FDM printer users running DRV8825 or A4988 drivers
  • Makers looking to reduce stepper vibration and noise
  • Hobbyists refining print detail on existing printers
  • Anyone adding a low-cost board to their printer electronics

Buying Tip

Check which stepper driver your printer uses before ordering, since the module is aimed at DRV8825, A4988 and similar step-and-direction drivers.

Elecvora expert review

Our verdict

A small, inexpensive add-on that targets a real annoyance: harsh, noisy stepper motion on FDM printers. It is most worthwhile for Delta users and anyone running DRV8825 or A4988 drivers who wants calmer movement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 40 × 30 mm board
  • Aimed at common DRV8825 and A4988 drivers
  • Helps reduce vibration and noise
  • Free-run protection against induction stress

Cons

  • Only one module included per pack
  • Installation requires access to printer electronics

Best for

Delta-style and FDM printers with DRV8825 or A4988 drivers

Not ideal for

Printers with driver types not covered by the listed compatibility

Specifications

CompatibilityAll types of FDM 3D Printers.
Length (mm)40
Width (mm)30
Shipping Weight0.04 kg
Shipping Dimensions5 × 4 × 2 cm

What's in the box

  • 1 × Smoother module for stepper driver motor

Frequently Asked Questions

What does this smoother module do?
It is an add-on board that softens the stepped output of a stepper driver, helping reduce vibration and noise from motor movement.
Which printers is it compatible with?
It is listed as compatible with all types of FDM 3D printers, including Delta-style machines.
Which stepper drivers does it suit?
It is intended for use with DRV8825, A4988 and similar step-and-direction driver units.
How big is the board?
The module measures 40 mm long and 30 mm wide, with a shipping weight of 0.04 kg.
What is the free-run protection for?
It is designed to protect motor performance against induction stress when the motor is in an unpowered state.
How many modules are included?
The package contains one smoother module for stepper driver motors.

Overview

This smoother module is an add-on board for the stepper motors used in FDM 3D printers. It sits in the motor signal path and works to soften the stepped output produced by the stepper driver, so movement feels less abrupt. The effect is most often noticed on Delta-style printers and when using drivers such as the DRV8825 or A4988 step-and-direction units.

The board is small and light, measuring 40 mm by 30 mm and weighing 0.04 kg for shipping. It is a straightforward upgrade for owners who want calmer motor behaviour without changing the driver itself.

Key Features

  • Smooths the stepped output of stepper drivers for softer motor movement
  • Helps reduce vibration generated by stepper motors
  • Contributes to lower noise emission during printing
  • Supports more detailed results by calming motor motion
  • Free-run protection guards motor performance against induction stress when the motor is unpowered
  • Compact 40 × 30 mm footprint

Specifications Explained

Compatibility

The module is listed as compatible with all types of FDM 3D printers. It is designed for use with stepper drivers including the DRV8825 and A4988 families, and with step-and-direction driver units generally.

Dimensions

At 40 mm long and 30 mm wide, the board is compact enough to fit alongside typical printer electronics. Shipping dimensions of 5 × 4 × 2 cm and a shipping weight of 0.04 kg make it a small, light parcel.

Compatibility and Requirements

Use this module with FDM 3D printers and stepper drivers of the DRV8825, A4988 or similar step-and-direction type. It is an add-on board, so it is intended to be installed alongside an existing driver rather than replacing it. No other requirements are specified in the product data.

Typical Uses

It is commonly used on Delta-style 3D printers where smooth motor motion matters, and on Cartesian FDM printers running DRV8825 or A4988 drivers where vibration and noise are a concern. It also suits anyone refining print detail by calming stepper movement.

What's in the Box

One smoother module for stepper driver motors is included.

Quick specs

Compatibility
All types of FDM 3D Printers.
Length (mm)
40
Width (mm)
30
Shipping Weight
0.04 kg
Shipping Dimensions
5 × 4 × 2 cm
See all specifications