
At a glance
Made by SparkFun, this dupont / jumper cable is a good fit for everyday home and hobby use. Main specs: wire size (awg) 28; cable length 150; connector type JST Female to Male Jumper.
Key Highlights
- Wire Size (AWG): 28
- Cable Length: 150
- Connector Type: JST Female to Male Jumper
Ideal For
- Charging phones and gadgets
- Spare cable for travel
- Bench power
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Wire Size (AWG) | 28 |
|---|---|
| Cable Length | 150 |
| Connector Type | JST Female to Male Jumper |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Overview
The SparkFun PRT-17912 150mm Qwiic Cable To Breadboard Jumper (4-pin), made by SparkFun, is listed in our dupont / jumper cable range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Wire Size (AWG): 28 (measure your mounting space before ordering)
- Cable Length: 150 (measure your mounting space before ordering)
- Connector Type: JST Female to Male Jumper (confirm your cable or board uses the same connector)
- Weight (g): 3 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a 150mm Qwiic Cable To Breadboard Jumper (4-pin) cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire's length is 150mm (about 5.9 inches). The adapter’s wires have been color-coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1" connector.
All Qwiic cables have the following color scheme and arrangement:
- Black = GND
- Red = 3.3V
- Blue = SDA
- Yellow = SCL
Package Includes:
1 x 150mm Qwiic Cable To Breadboard Jumper (4-pin).
Quick specs
- Wire Size (AWG)
- 28
- Cable Length
- 150
- Connector Type
- JST Female to Male Jumper
- Weight (g)
- 3
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 5 × 4 × 2 cm



















