
1 / 3 · Click to enlarge
At a glance
Made by SparkFun, this sparkfun modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 5; length (mm) 15; width (mm) 10. Check that your power source supplies 5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 5
- Length (mm): 15
- Width (mm): 10
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 5 |
|---|---|
| Supply Current | 25 mA |
| Detection Distance (mm) | 3 m |
| Length (mm) | 15 |
| Width (mm) | 10 |
| Weight (g) | 2.6 |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 7 × 3.5 × 1 cm |
Overview
The SparkFun ROB-09453 Line Sensor Breakout - QRE1113 (Analog), made by SparkFun, is listed in our sparkfun modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 5 (match this to your power supply; too high a voltage can damage the part)
- Supply Current: 25 mA (your supply must deliver at least this much current)
- Detection Distance (mm): 3 m
- Length (mm): 15 (measure your mounting space before ordering)
- Width (mm): 10 (measure your mounting space before ordering)
- Weight (g): 2.6 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.004 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 7 × 3.5 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This version of the SparkFun Line Sensor Breakout - QRE1113 (Analog) features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems. The board's QRE1113 IR reflectance sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor.
When power is applied to the VCC and GND pins the IR LED inside the sensor will illuminate. A 100Ω resistor is on-board and placed in series with the LED to limit current. A 10kΩ resistor pulls the output pin high, but when the light from the LED is reflected back onto the phototransistor the output will begin to go lower. The more IR light sensed by the phototransistor, the lower the output voltage of the breakout board.
Data Download Link: https://github.com/sparkfun/QRE1113_Line_Sensor-Analog
Features:
- It has a Phototransistor output
- No contact surface sensing
- It comes with a Miniature package
Package Includes:
1 x SparkFun Line Sensor Breakout - QRE1113 (Analog)Quick specs
- Operating Voltage (VDC)
- 5
- Supply Current
- 25 mA
- Detection Distance (mm)
- 3 m
- Length (mm)
- 15
- Width (mm)
- 10
- Weight (g)
- 2.6




















