
1 / 3 · Click to enlarge
AI Summary
The SparkFun TOL-20680 LiPo Fuel Gauge monitors single-cell LiPo batteries via I2C and provides state-of-charge plus voltage readings. Its alert pin warns your project when capacity falls below a set threshold.
Key Highlights
- Fuel-gauge algorithm reports relative state of charge
- Direct A/D measurement of battery voltage
- I2C interface for easy microcontroller connection
- Alert pin signals low charge threshold
- Supports single-cell LiPo from 2.5 to 4.5V
- Low active current: 50–75µA
Ideal For
- Makers building portable LiPo-powered projects
- Drone and RC hobbyists needing battery monitoring
- Engineers designing low-power sensor nodes
- Students learning about I2C and battery management
- Anyone using single-cell LiPo batteries in custom electronics
Buying Tip
Remember that this gauge is for single-cell LiPo batteries only; check your battery's voltage range before connecting.
Elecvora expert review
Our verdict
The SparkFun TOL-20680 LiPo Fuel Gauge is a well-designed, easy-to-use solution for monitoring single-cell LiPo batteries. It provides accurate state-of-charge and voltage readings over I2C, with the added benefit of an alert pin for low-battery warnings.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple I2C interface with readily available libraries
- Low power consumption extends battery life
- Alert pin enables proactive power management
- Compact size fits into tight builds
Cons
- Limited to single-cell LiPo batteries
- Requires soldering or wiring to connect
- No built-in display; needs a microcontroller to read data
Best for
Makers and engineers needing reliable LiPo monitoring in embedded projects
Not ideal for
Users looking for a standalone battery meter with display
Specifications
| Voltage Rating (V) | 2.5 to 4.5 |
|---|---|
| Compatibility | LiPo |
| Max. Clock Frequency (MHz) | 0.4 |
| Current Measuring Range DC | Active Current: 50~75uA, Sleep-Mode Current(uA): 1~3 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
What's in the box
- 1 x SparkFun LiPo Fuel Gauge
Frequently Asked Questions
What type of batteries does this fuel gauge support?
How does the fuel gauge communicate with my project?
Can I use this with a multi-cell LiPo battery?
What is the alert pin for?
Does the board come with a battery or cables?
How much current does the fuel gauge draw?
Overview
The SparkFun TOL-20680 LiPo Fuel Gauge is a small breakout board that connects between a single-cell lithium polymer battery and your project. It uses a sophisticated algorithm to estimate the battery's relative state of charge and also performs a direct analog-to-digital measurement of the battery voltage. Your microcontroller can read these values over an I2C bus, giving you a clear picture of how much 'fuel' remains. An alert pin can be configured to notify your system when the charge drops below a certain percentage, helping you avoid unexpected shutdowns.
Key Features
- Fuel gauge system for single-cell lithium-ion batteries
- I2C interface for simple two-wire communication
- Alert pin to signal low charge status
- Hardware and software reset options for flexible control
- Wide voltage range of 2.5 to 4.5V, suitable for LiPo cells
- Low power consumption with active current of 50–75µA and sleep-mode current of 1–3µA
Specifications Explained
Voltage Rating (2.5–4.5V): This range covers the typical operating window of a single LiPo cell, from near-empty to fully charged. It ensures the gauge can measure the battery across its useful discharge curve.
Compatibility (LiPo): The fuel gauge is specifically designed for lithium polymer chemistry, so the algorithm and voltage thresholds are tuned for LiPo behaviour.
Max Clock Frequency (0.4 MHz): The I2C bus can run at up to 400 kHz, which is the standard fast-mode rate, allowing quick data reads without slowing your main loop.
Current Measuring Range DC: The board itself draws only 50–75µA in active mode and 1–3µA in sleep mode, so it won't noticeably drain your battery.
Compatibility and Requirements
The TOL-20680 works with single-cell LiPo batteries within the 2.5–4.5V range. It requires a microcontroller with an I2C interface to read the data. No additional components are needed for basic operation, though you will need to connect the battery and the I2C lines (SDA, SCL) plus power and ground. The alert pin is optional but useful for interrupt-driven low-battery warnings.
Typical Uses
- Monitoring battery level in portable electronics and wearables
- Adding low-battery alerts to RC vehicles and drones
- Power management for remote sensors and data loggers
- Educational projects teaching battery management and I2C
- Any application where knowing the remaining charge of a LiPo cell is important
What's in the Box
1 x SparkFun LiPo Fuel Gauge.
Quick specs
- Voltage Rating (V)
- 2.5 to 4.5
- Compatibility
- LiPo
- Max. Clock Frequency (MHz)
- 0.4
- Current Measuring Range DC
- Active Current: 50~75uA, Sleep-Mode Current(uA): 1~3
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 5 × 4 × 2 cm


















