Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SwiftWing PDB02 is a 3S–6S LiPo power distribution board with a 4-layer 2 oz copper PCB and 200A continuous current handling. It offers XT30 and XT60 solder pads plus M3 mounting for flexible builds.

Key Highlights

  • Supports 3S–6S LiPo input (11.1–25.2 V)
  • Handles up to 200A continuous current
  • 4-layer PCB with 2 oz copper for thermal performance
  • XT30 and XT60 solder pad footprints for flexible wiring
  • Compact 50 × 50 mm board with 4 × M3 mounting holes
  • Lightweight at approximately 10 g

Ideal For

  • FPV racing pilots building high-current quads
  • Long-range UAV builders needing reliable power distribution
  • Industrial multirotor integrators
  • Robotics hobbyists using 3S–6S LiPo power
  • Drone builders who prefer solder connections

Buying Tip

Check that your frame has 45 mm M3 mounting spacing and that your ESCs and accessories can accept direct battery voltage before soldering.

Elecvora expert review

Our verdict

The SwiftWing PDB02 is a straightforward, well-built power distribution board for 3S–6S builds that need high current handling in a small footprint. Its 4-layer 2 oz copper PCB and dual connector footprints make it a practical choice for experienced builders.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 200A continuous current rating
  • Dual XT30 and XT60 solder pad options
  • Compact 50 × 50 mm size with standard M3 spacing
  • Lightweight at about 10 g
  • ENIG finish for easier soldering

Cons

  • Requires soldering for all connections
  • No voltage regulation or built-in BEC
  • Connectors not included

Best for

Drone builders needing a compact high-current PDB for 3S–6S LiPo systems

Not ideal for

Beginners who prefer plug-and-play wiring or need regulated outputs

Specifications

Model No. / NamePDB02
Input Voltage26 V DC
PCB layers4-layer, 2 oz copper
Board TypePower Distribution Board (PDB)
Battery Input Voltage (V)Recommended : 3S–6S LiPo (11.1–25.2 V)
FinishENIG
Mounting Hole Diameter (mm)4 × M3 (45 mm spacing)
Operating Temperature (°C)–10 to +60
Storage Temperature (°C)–20 to +85
Length (mm)50
Width (mm)50
Weight (g)10
Shipping Weight0.013 kg
Shipping Dimensions7 × 7 × 2 cm

What's in the box

  • 1 × SwiftWing PDB02 3S–6S Direct Power Distribution Board

Frequently Asked Questions

What battery voltage does the PDB02 support?
It is recommended for 3S–6S LiPo batteries, which cover 11.1 V to 25.2 V. The board has a 26 V DC input rating.
Does the PDB02 provide voltage regulation?
No, it is a direct power distribution board and does not regulate voltage. Connected devices must accept the battery voltage directly.
What connectors are included?
No connectors are included. The board has solder pad footprints for XT30 and XT60 connectors, which you solder yourself.
How much current can it handle?
The board supports up to 200A continuous current, depending on your wiring and connectors.
What are the mounting hole dimensions?
It has four M3 mounting holes with 45 mm spacing, and the board measures 50 × 50 mm.
What is included in the package?
The package contains one SwiftWing PDB02 power distribution board. Connectors and mounting hardware are not included.

Overview

The SwiftWing PDB02 is a direct power distribution board built for multirotor and UAV power systems. It takes a 3S–6S LiPo battery input and distributes power to multiple ESCs and components without voltage regulation. The board uses a 4-layer PCB with 2 oz copper to support high current and manage heat. Solder pads for XT30 and XT60 connectors let you choose the battery connector that suits your build. With a 50 × 50 mm footprint and M3 mounting holes at 45 mm spacing, it integrates into many standard drone frames.

Key Features

  • 3S–6S LiPo input: works with 11.1 V to 25.2 V battery packs.
  • 200A continuous current: suitable for high-current multirotor setups.
  • 4-layer, 2 oz copper PCB: enhances current handling and thermal performance.
  • ENIG finish: provides a flat, solderable surface for reliable joints.
  • XT30 and XT60 solder pads: supports two common connector types for flexible assembly.
  • Compact and light: 50 × 50 mm board weighs about 10 g.

Specifications Explained

The 26 V DC input rating and recommended 3S–6S LiPo range mean the board is designed for common drone battery voltages. The 4-layer PCB with 2 oz copper increases copper thickness and layer count, which helps the board carry high current with lower resistance and better heat spreading. The ENIG (electroless nickel immersion gold) finish protects the copper and makes soldering easier. Four M3 mounting holes at 45 mm spacing match many frame stack patterns. Operating temperature is rated from –10 °C to +60 °C, with storage from –20 °C to +85 °C.

Compatibility and Requirements

The PDB02 is intended for 3S–6S LiPo batteries (11.1–25.2 V). It does not provide voltage regulation, so connected components must accept the battery voltage directly. You will need to solder your chosen XT30 or XT60 connector and ESC power wires to the board. Mounting requires M3 screws and a frame with 45 mm hole spacing. Always observe correct polarity when connecting the battery.

Typical Uses

This board is well suited to racing drones, long-range UAVs, and industrial multirotor systems that need a simple, high-current power distribution point. It can also be used in robotics projects where a compact power bus is required.

What's in the Box

1 × SwiftWing PDB02 3S–6S Direct Power Distribution Board.

Quick specs

Model No. / Name
PDB02
Input Voltage
26 V DC
PCB layers
4-layer, 2 oz copper
Board Type
Power Distribution Board (PDB)
Battery Input Voltage (V)
Recommended : 3S–6S LiPo (11.1–25.2 V)
Finish
ENIG
See all specifications