Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A rigid PCB interface that lets you solder an XT60 connector and mount it securely with M3 screws instead of leaving it hanging on wires. It reduces strain on solder joints and keeps power wiring neat in drones, robotics and DC builds.

Key Highlights

  • Converts a standard XT60 connector into a panel-mountable interface
  • Two-layer heavy copper PCB for high-current power paths
  • Large copper solder pads for strong, reliable joints
  • M3 through-hole mounting for frames, panels and enclosures
  • Compact 37 x 10 mm footprint fits tight builds
  • Helps reduce wire strain and connector fatigue

Ideal For

  • FPV pilots building or repairing power leads
  • Drone builders who want a fixed battery connection point
  • Robotics hobbyists wiring high-current DC systems
  • Makers building ground control stations and enclosures
  • DIY enthusiasts organising battery and power layouts

Buying Tip

Check that you already have an XT60 connector, M3 screws and a soldering iron, since the board ships on its own.

Elecvora expert review

Our verdict

A simple, well-focused part that solves a real problem: connectors that hang on wires and eventually fail. For anyone who solders regularly, it is an inexpensive way to make a power connection more rigid and better organised.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Makes XT60 connections rigid and mountable
  • Large pads are easy to solder
  • M3 holes simplify installation
  • Compact footprint suits tight builds

Cons

  • XT60 connector not included
  • Requires soldering skill and tools
  • M3 screws not supplied

Best for

Builders who want a fixed, strain-free XT60 power interface

Not ideal for

Users looking for a plug-and-play connector with no soldering

Specifications

Shipping Weight0.20 kg
Shipping Dimensions3 × 3 × 2 cm

What's in the box

  • 1 x SwiftWing XT60 Connector PCB Mount Welding Board

Frequently Asked Questions

Is the XT60 connector included?
No. The package contains only the PCB mount welding board, so you need to supply your own XT60 connector.
What voltage can this board handle?
It is intended for applications up to 14S LiPo, depending on your setup. Confirm your own build's requirements before use.
How do I mount the board?
The board has M3 through-holes, so it can be fixed to a frame, panel or enclosure with M3 screws.
Do I need to solder it?
Yes. You solder your XT60 connector to the large copper pads on the board.
What are the board dimensions?
The board measures 37 x 10 mm.
Can I use it in a robotics project?
Yes. It suits robotics, drones, ground control stations and other high-current DC setups.

Overview

The SwiftWing XT60 Connector PCB Mount Welding Board is a small adapter board that gives an XT60 connector a fixed home. Rather than relying on a soldered wire joint to hold the connector in place, you solder the connector to the board and screw the board down. The result is a power interface that stays put under vibration, repeated plugging and mechanical load.

It is aimed at builders working on drones, robotics, battery systems and other DC power layouts who want a cleaner and more dependable installation than a loose connector on a cable.

Key Features

  • PCB mount design: turns a standard XT60 connector into a rigid, panel-mountable power point.
  • Heavy copper construction: a two-layer board with large copper pads supports strong soldering and better current handling.
  • M3 mounting holes: through-holes let you fix the board to frames, panels or enclosures with M3 screws.
  • Compact size: at 37 x 10 mm, the board fits into tight layouts without taking up much room.
  • Strain relief: keeps direct wire pull away from the connector joint, which helps extend the life of the assembly.

Specifications Explained

Two-layer heavy copper PCB: the copper layers carry current and spread heat, which matters when the board sits in a high-current path. Large solder pads give you more surface for a solid joint, so the connection is easier to make and less likely to fail.

M3 through-hole mounting: the holes accept M3 screws, so the board can be fastened to a frame, panel or enclosure instead of floating on wires. This is what turns the connector into a fixed interface.

Voltage support: the board is intended for applications up to 14S LiPo, depending on how it is used. Always confirm your own build's current and voltage requirements before soldering.

Dimensions: 37 x 10 mm, with a shipping weight of 0.20 kg and shipping dimensions of 3 x 3 x 2 cm.

Compatibility and Requirements

The board is designed for standard XT60 connectors, which are not included. You will need an XT60 connector, suitable wire, a soldering iron and M3 screws for mounting. The board supports high-current DC applications, and the practical voltage limit depends on your setup, up to 14S LiPo.

Typical Uses

  • FPV drones and UAV power connections
  • Battery mounting and power distribution setups
  • Ground control stations
  • Robotics and automation systems
  • High-current DC power builds

What's in the Box

1 x SwiftWing XT60 Connector PCB Mount Welding Board. The XT60 connector is not included.

Quick specs

Shipping Weight
0.20 kg
Shipping Dimensions
3 × 3 × 2 cm
See all specifications