
1 / 4 · Click to enlarge
AI Summary
The SwiftWing SwiftCAN-HUB turns one flight controller CAN port into six powered ports for DroneCAN peripherals. Its onboard regulator accepts 2S-14S LiPo and supplies up to 5A at 5.3V, simplifying wiring.
Key Highlights
- Expands one CAN port into six powered CAN ports
- Accepts 2S-14S LiPo input via XT30 connector
- High-efficiency DC-DC regulator delivers 5.3V at up to 5A
- JST-GH 4-pin connectors for reliable peripheral links
- Dedicated CAN input port for flight controller connection
- Compact enclosed design with red power status LED
Ideal For
- UAV builders using ArduPilot or PX4 with multiple DroneCAN peripherals
- VTOL and multirotor developers needing scalable CAN connectivity
- Robotics engineers integrating CAN-based sensors and actuators
- FPV pilots adding CAN GNSS and telemetry modules
- Autonomous platform designers simplifying power and wiring
Buying Tip
Check that your flight controller has a spare CAN port and that your peripherals use JST-GH 4-pin connectors; the hub does not include XT30 battery cables.
Elecvora expert review
Our verdict
The SwiftCAN-HUB is a practical solution for expanding CAN connectivity without draining the flight controller's power supply. Its wide input range and robust connectors make it a reliable addition to complex UAV and robotics builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 2S-14S LiPo input range
- High-efficiency regulator with 5A output
- Six powered CAN ports in a compact enclosure
- Standard JST-GH connectors for DroneCAN peripherals
Cons
- Requires a separate LiPo battery connection
- No XT30 battery cable included in the box
- Limited to 5A total output, which may restrict very power-hungry devices
Best for
UAV and robotics developers needing to connect multiple DroneCAN peripherals from a single CAN port.
Not ideal for
Users with only one or two CAN devices who don't need powered expansion.
Specifications
| Shipping Weight | 0.047 kg |
|---|---|
| Shipping Dimensions | 7 × 7 × 3 cm |
What's in the box
- 1 x SwiftCAN-HUB 6-Port Powered CAN Hub
- 1 x JST-GH 4-Pin Cable
Frequently Asked Questions
What is the SwiftCAN-HUB used for?
Which flight controllers are compatible?
What input voltage does the hub accept?
How much current can it supply to peripherals?
What is included in the box?
What are the operating temperature limits?
Overview
The SwiftWing SwiftCAN-HUB is a powered CAN distribution hub built for UAV and robotics platforms that rely on DroneCAN or other CAN-based peripherals. It connects to a single CAN interface on your flight controller and provides six additional ports, each capable of powering and communicating with a CAN device. An integrated high-efficiency DC-DC regulator converts a 2S-14S LiPo battery input into a regulated 5.3V supply, delivering up to 5A total to connected peripherals. This architecture keeps the flight controller's power budget free and reduces wiring complexity.
Key Features
- One CAN input from the flight controller, six powered CAN peripheral ports
- Wide 2S-14S LiPo input range with XT30 connector
- Onboard DC-DC regulator with over 90% efficiency
- Stable 5.3V ±0.15V output for CAN devices
- Up to 5A total output current
- JST-GH 4-pin connectors throughout
- Red power LED for status indication
- Compact 55 x 30 x 18 mm enclosure, 22 g weight
Specifications Explained
The input voltage range of 2S to 14S LiPo makes the hub suitable for small multirotors through to larger UAVs and robotics platforms. The XT30 input connector is commonly used on modern battery packs, so you can tap directly from your main pack. The 5.3V output is slightly above the standard 5V to compensate for cable and connector losses, ensuring peripherals receive adequate voltage. With a total output current of 5A, the hub can power multiple CAN devices such as GNSS modules, ESCs, sensors, and telemetry radios without overloading the flight controller. The JST-GH 4-pin connectors are standard for DroneCAN peripherals, providing secure and reliable connections. Operating temperature is rated from -20°C to +60°C.
Compatibility and Requirements
The SwiftCAN-HUB is designed for ArduPilot, PX4, and DroneCAN systems. It requires a 2S-14S LiPo battery connected to the XT30 input and a CAN interface from a compatible flight controller. Peripherals must use JST-GH 4-pin CAN connectors. A JST-GH 4-pin cable is included for connecting the hub to the flight controller. No other cables or power supplies are included.
Typical Uses
Use the hub to add multiple DroneCAN GNSS modules, ESCs, airspeed sensors, or telemetry links to a multirotor, VTOL aircraft, or autonomous ground vehicle. It is especially useful when the flight controller has only one CAN port but you need to connect several peripherals while keeping wiring tidy and power delivery stable.
What's in the Box
- 1 x SwiftCAN-HUB 6-Port Powered CAN Hub
- 1 x JST-GH 4-Pin Cable





















