
1 / 6 · Click to enlarge
At a glance
Made by SwiftWing, this drone frame parts is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.045 kg.
Key Highlights
- Shipping Weight: 0.045 kg
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.045 kg |
|---|---|
| Shipping Dimensions | 12 × 10 × 2 cm |
Overview
The SwiftWing PM03-14S Integrated Power Module & Power Distribution Board (3S–14S, 120A), made by SwiftWing, is listed in our drone frame parts range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.045 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 12 × 10 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SwiftWing PM03-14S Integrated Power Module & Power Distribution Board is a compact, high-performance solution designed for UAV platforms using ArduPilot and PX4 systems. Supporting 3S–14S LiPo batteries, it efficiently distributes power to up to six ESCs while providing regulated 5V and 12V outputs. With precision shunt-based current sensing and accurate voltage monitoring, it ensures reliable power management in demanding environments. Built with a 4-layer PCB and 2 oz copper, the board delivers high current handling up to 120A. The pre-installed Rubycon low-ESR capacitor enhances stability and reduces noise. Ideal for industrial drones, VTOL aircraft, and robotics, this module combines power regulation, monitoring, and distribution in one robust and compact unit.
Features:
- Supports 3S–14S LiPo (9V–60V)
- High current capacity up to 120A
- Integrated analog power module
- Six ESC output distribution
- Precision shunt-based current sensing
- Regulated 5V & 12V outputs
- Low-ESR Rubycon capacitor installed
- Pixhawk-compatible JST-GH interface
Specifications:
- Supported Battery: 3S–14S LiPo
- Maximum Input Voltage: 60V DC
- Continuous Current: 120A
- Burst Current: 150A
- Voltage Divider Ratio: 20.66
- ESC Outputs: 6
- FC Output Type: Filtered buck output
- Interface: JST-GH 6-pin
- Protection: TVS transient protection
- PCB: 4-layer, 2 oz copper, ENIG finish
- Capacitor: 330µF, 63V Rubycon low-ESR
- Operating Temperature: -10°C to +60°C
- Storage Temperature: -20°C to +85°C
- Mounting Holes: 4 × M3
- PCB Thickness: 1.6 mm ±0.15 mm
- Dimensions: 58 × 52 × 5 mm
- Weight: 36g
Package Includes:
1 x SwiftWing PM03-14S Integrated Power Module & Power Distribution Board (3S–14S, 120A)
2 x JST power cable



















