Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This brushed / brushless dc motor driver is a good fit for everyday home and hobby use. Main specs: item type TB6612 Motor Driver; current rating (a) 1.2 to 3.2; voltage rating (v) 15. Check that your power source supplies 15 before connecting it.

Key Highlights

  • Item Type: TB6612 Motor Driver
  • Current Rating (A): 1.2 to 3.2
  • Voltage Rating (V): 15

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeTB6612 Motor Driver
Current Rating (A)1.2 to 3.2
Voltage Rating (V)15
Supply Voltage15V
Output Current (A)1.2A ( average ) / 3.2A ( peak )
InterfaceI2C
Operating Temperature (°C)-40 to 85
Length (mm)30
Width (mm)28
Weight (g)4.81
Shipping Weight0.01 kg
Shipping Dimensions6 × 4 × 1 cm

Overview

The TB6612 D1 Motor Driver Shield is listed in our brushed / brushless dc motor driver range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: TB6612 Motor Driver
  • Current Rating (A): 1.2 to 3.2 (your supply must deliver at least this much current)
  • Voltage Rating (V): 15 (match this to your power supply; too high a voltage can damage the part)
  • Supply Voltage: 15V (match this to your power supply; too high a voltage can damage the part)
  • Output Current (A): 1.2A ( average ) / 3.2A ( peak ) (your supply must deliver at least this much current)
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -40 to 85
  • Length (mm): 30 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a  TB6612 D1 Motor Driver Shield. This mini D1 motor uses the Toshiba TB6612 D1 driver chip to control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short break, and stop. The two motor outputs (A and B) can be controlled separately, the speed of each motor is controlled via a PWM input signal with a frequency of up to 100 kHz. The STBY pin must be pulled high to bring the motor out of standby mode.

All the pins on the TB6612 D1 are split into two 0.1 "latching headers, the pins are arranged such that the input pins are on one side and the output pins are on the other.

Modes:
  1. Standby control mode
    •   I2C mode: Control TB6612's STBY with I2C protocol
    •   IO mode:  Control TB6612's STBY with "S" pin
  2. Shield reset mode
    • short: reset with d1 mini (reset at power on or press d1 mini's reset button)
    • open: reset by "DTR" pin.

Features:

1. Interface: I2C 2. Power supply voltage: VM = 15V max 3. Output current: Iout = 1.2A ( average ) / 3.2A ( peak )

Package Includes:

1 x TB6612 D1 Motor Driver Shield

1 x All essential Berg connector set

Quick specs

Item Type
TB6612 Motor Driver
Current Rating (A)
1.2 to 3.2
Voltage Rating (V)
15
Supply Voltage
15V
Output Current (A)
1.2A ( average ) / 3.2A ( peak )
Interface
I2C
See all specifications