
1 / 8 · Click to enlarge
AI Summary
A small eight-diode add-on board that filters stepper motor ripple to reduce vibration and chatter on 3D printers. It connects with the included 4-pin cable and works with DRV8825 and A4988 drivers.
Key Highlights
- Eight flyback diodes smooth stepper motor output signals
- Reduces vibration, mechanical chatter and motor noise
- Compatible with DRV8825 and A4988 stepper drivers
- Includes 4-pin female-to-female connection cable
- Compact 50 x 25 mm board with corner mounting holes
- 1000V DC blocking voltage and 3A rectified output current
Ideal For
- 3D printer owners using DRV8825 or A4988 stepper drivers
- Delta-style printer builders dealing with motor chatter
- Makers upgrading low-resistance stepper motor setups
- Hobbyists troubleshooting surface artefacts and vibration
- Electronics tinkerers adding a low-cost filter to motor outputs
Buying Tip
Check which stepper drivers your printer uses first, because the module is intended for DRV8825 and A4988 drivers and offers less benefit with Trinamic SpreadCycle drivers.
Elecvora expert review
Our verdict
A cheap, simple filter board that can noticeably reduce stepper ripple and chatter on DRV8825 and A4988 setups. It is not a universal fix, and machines will respond differently.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Low-cost hardware upgrade
- Eight flyback diodes for smoothing and driver protection
- Includes the required 4-pin cable
- Compact board with corner mounting holes
Cons
- Less benefit with Trinamic SpreadCycle drivers
- Results vary between printers and motors
- No detailed installation instructions included
Best for
3D printers running DRV8825 or A4988 drivers with visible vibration or chatter
Not ideal for
Users already running Trinamic drivers with SpreadCycle who expect a large change
Specifications
| No. of Flyback Diodes | 8 |
|---|---|
| Compatibility | DRV8825 Drivers, A4988 Drivers |
| Cable Type | 4-Pin Female to 4-Pin Female |
| Mounting Style | Ø2.3mm Hole on Each Corner |
| Additional Specs. | DC Blocking Voltage (VR): 1000V |
| Reverse Voltage (VRMS) | 700V |
| Rectified Output Current (A) | 3A @ TT = +75°C |
| Dimensions (L x W x H) mm | Approx. 50 x 25mm |
| Weight (g) | 10 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 10 × 7 × 1 cm |
What's in the box
- 1 x TL-Smoother module
- 1 x 4-pin female-to-female cable
Frequently Asked Questions
What does the TL-Smoother actually do?
Which stepper drivers does it work with?
Will it help if I use Trinamic drivers?
What is included in the package?
How is the board mounted?
What are the electrical ratings?
Overview
The TL-Smoother Eight Chip Module is a small add-on board for 3D printer stepper motor drivers. It is designed to reduce the ripple and uneven signal wave that can appear at the motor outputs, especially when a DRV8825 driver is paired with a low-resistance motor. The result is smoother movement, less mechanical chatter and lower noise from the stepper motors.
The board carries eight flyback (freewheeling) diodes that give the motor outputs a path for inductance voltages. This also helps protect the driver when it is unpowered. At roughly 50 x 25 mm and about 10 g, it fits easily into tight electronics enclosures.
Key Features
- Eight flyback diodes for smoother motor output signals
- Vibration and chatter reduction for cleaner motion, especially on parallel-arm machines
- Driver protection against inductance voltages when the driver is unpowered
- Simple wiring with the included 4-pin female-to-female cable
- Easy mounting via a 2.3 mm hole in each corner
Specifications Explained
Diode count and voltage ratings
The eight flyback diodes are the core of the module. The 1000V DC blocking voltage and 700V reverse voltage ratings describe the diode limits, while the 3A rectified output current at a case temperature of +75°C indicates the current the board is rated to handle. In practice, these ratings mean the module is built for typical 3D printer stepper motor currents.
Size and mounting
At approximately 50 x 25 mm with a 2.3 mm hole in each corner, the board can be screwed down or tucked beside the driver board. The 10 g weight adds almost nothing to the machine.
Compatibility and Requirements
The module is listed as compatible with DRV8825 and A4988 stepper drivers. It connects through the supplied 4-pin female-to-female cable, so no soldering is described for the connection itself. If you already use Trinamic drivers with SpreadCycle, the smoothing benefit may be smaller, since that driver mode performs a similar filtering process.
Typical Uses
Common uses include delta-style 3D printers running DRV8825 drivers, printers with low-resistance motors, and machines where stepper chatter or surface artefacts are a concern. It can also be fitted to other 3D printer models, though the clipping effect varies between machines.
What's in the Box
- 1 x TL-Smoother module
- 1 x 4-pin female-to-female cable
Quick specs
- No. of Flyback Diodes
- 8
- Compatibility
- DRV8825 Drivers, A4988 Drivers
- Cable Type
- 4-Pin Female to 4-Pin Female
- Mounting Style
- Ø2.3mm Hole on Each Corner
- Additional Specs.
- DC Blocking Voltage (VR): 1000V
- Reverse Voltage (VRMS)
- 700V













