Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact micro-stepping driver module rated 5.5–46 VDC and up to 2.5 A, with 200 steps per revolution and internal micro-stepping for smoother, quieter motor motion. Its pinout and VREF differ from A4988 and DRV8825 drivers, so check the datasheet before installing.

Key Highlights

  • Internal micro-stepping for finer precision and lower motor noise
  • Wide 5.5 to 46 VDC supply range for varied builds
  • Up to 2.5 A maximum current, default Vref around 0.65 V
  • 200 steps per revolution for standard stepper motors
  • Small, lightweight module measuring about 5 × 3 × 1 cm
  • Fits Ramps1.4, MKS Gen and Lerdge touch screen boards

Ideal For

  • 3D printer builders upgrading motion drivers on Ramps1.4 or MKS Gen boards
  • Makers using Lerdge touch screen motherboards
  • CNC and motion-control hobbyists working with stepper driver sockets
  • Users wanting quieter, more precise stepper motion
  • Electronics hobbyists comfortable setting Vref with a multimeter

Buying Tip

Measure Vref between GND and the potentiometer's middle point with the board powered on, and never connect a motor while measuring, as that can damage the driver.

Elecvora expert review

Our verdict

A tidy micro-stepping module that delivers smoother, quieter motion once Vref and orientation are handled properly. It is not a drop-in swap for A4988 or DRV8825 users, but careful setup pays off.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Internal micro-stepping improves precision and lowers noise
  • Wide 5.5 to 46 VDC supply range
  • Up to 2.5 A maximum current
  • Heat sink attached directly to the PCB
  • Compact and light at 0.02 kg shipping weight

Cons

  • Pinout and VREF differ from A4988 and DRV8825, so the datasheet is essential
  • Motor direction is reversed relative to those drivers
  • Vref setup requires a powered board and a multimeter

Best for

Makers upgrading stepper motion on Ramps1.4, MKS Gen or Lerdge boards

Not ideal for

Beginners expecting a plug-and-play swap for A4988 or DRV8825 drivers

Specifications

Model SeriesTMC Series
Voltage Rating (V)5.5 to 46VDC
Current Rating (A)1.25 to 2.5
Model No. / NameTMC2100
Steps Per Revolution200
Supply Voltage5.5 to 46 V
Max Current (A)2.5
Shipping Weight0.02 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x TMC2100 Stepper Motor Driver Module

Frequently Asked Questions

What voltage does the TMC2100 module need?
It accepts a supply from 5.5 to 46 VDC, so it can be matched to a wide range of motor supply setups.
How much current can it handle?
The maximum is 2.5 A, with a rated range of 1.25 to 2.5 A. At the default Vref of about 0.65 V, the current is around 0.5 A.
How do I set the current?
Current follows i = Vref × 1.9 / 2.5. Measure Vref between GND and the potentiometer's middle point with the board powered on, and keep the motor disconnected while measuring.
Is it compatible with A4988 and DRV8825 setups?
It uses a similar driver socket format, but the pinout and VREF differ, and motor direction runs opposite. Read the datasheet and adjust firmware or wiring as needed.
What should I do on a Ramps1.4 or MKS Gen board?
Remove the three jumper caps under the socket before installing the module, and make sure it is seated in the correct direction.
What is included with the module?
The package contains one TMC2100 Stepper Motor Driver Module. The heat sink is attached directly to the PCB.

Overview

The TMC2100 is a complete micro-stepping motor driver supplied as a small plug-in module. Rather than relying on the host board to manage stepping, it controls micro-stepping itself, which sharpens positioning precision and reduces the sound a stepper motor makes while running. The module accepts a supply of 5.5 to 46 VDC and is rated for a maximum current of 2.5 A, with 200 steps per revolution.

It is aimed at makers and builders who already work with stepper driver sockets and want quieter, smoother motion. Because the pinout and VREF arrangement differ from the A4988 and DRV8825, the datasheet should be read before the module is powered up.

Key Features

  • Internal micro-stepping: the module manages micro-stepping itself for improved precision and reduced noise.
  • Broad voltage range: operates from 5.5 to 46 VDC.
  • Current headroom: up to 2.5 A maximum, with a default Vref of about 0.65 V giving roughly 0.5 A.
  • Compact format: shipping dimensions of about 5 × 3 × 1 cm and a shipping weight of 0.02 kg.
  • Heat sink included: the heat sink is attached directly to the PCB.

Specifications Explained

Voltage: the 5.5 to 46 VDC range covers a wide spread of motor supply setups, so the module can be matched to the supply your board already provides.

Current: the rated range is 1.25 to 2.5 A, with 2.5 A as the maximum. Current is set by Vref using the relationship i = Vref × 1.9 / 2.5. At the default Vref of about 0.65 V, current is around 0.5 A; the maximum is 1 A in that default configuration, so plan Vref around your motor.

Steps per revolution: 200 steps per revolution matches common stepper motors and keeps motion calculations straightforward.

Compatibility and Requirements

The module is designed for stepper driver sockets and is noted for use with Ramps1.4, MKS Gen and Lerdge touch screen motherboards. When used in a Ramps1.4 or MKS Gen board, remove the three jumper caps under the socket. Motor direction runs opposite to the A4988 and DRV8825; adjust the firmware or swap the motor wiring, and on Lerdge boards set direction on the settings page. The pinout and VREF differ from those drivers, so consult the datasheet.

Typical Uses

Suitable for 3D printer motion systems, small CNC builds and other projects that use stepper driver sockets and want quieter, more precise stepping.

What's in the Box

  • 1 x TMC2100 Stepper Motor Driver Module

Quick specs

Model Series
TMC Series
Voltage Rating (V)
5.5 to 46VDC
Current Rating (A)
1.25 to 2.5
Model No. / Name
TMC2100
Steps Per Revolution
200
Supply Voltage
5.5 to 46 V
See all specifications