Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This stepper motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: model series TMC Series; voltage rating (v) 5.5 to 45 VDC; current rating (a) 1.2 to 2.5. Check that your power source supplies 5.5 to 45 VDC before connecting it.

Key Highlights

  • Model Series: TMC Series
  • Voltage Rating (V): 5.5 to 45 VDC
  • Current Rating (A): 1.2 to 2.5

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model SeriesTMC Series
Voltage Rating (V)5.5 to 45 VDC
Current Rating (A)1.2 to 2.5
Logic Voltage (V)3 ~ 5
Single Phase Current (A)1.2
Micro Step1/256
Length (mm)20.5
Width (mm)15.5
Weight (g)11
Shipping Weight0.016 kg
Shipping Dimensions10 × 7 × 2 cm

Overview

The TMC2130 V1.1 Stepper Motor Driver Module is listed in our stepper motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model Series: TMC Series
  • Voltage Rating (V): 5.5 to 45 VDC (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 1.2 to 2.5 (your supply must deliver at least this much current)
  • Logic Voltage (V): 3 ~ 5 (match this to your power supply; too high a voltage can damage the part)
  • Single Phase Current (A): 1.2 (your supply must deliver at least this much current)
  • Micro Step: 1/256
  • Length (mm): 20.5 (measure your mounting space before ordering)
  • Width (mm): 15.5 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TMC2130 V1.1 Stepper Motor Driver Module can be used separately or in combination with a CNC shield or 3D printer. This V1.1 has the SPI pins soldered upwards so that they are accessible from above.  These Stepper Drivers offer high-efficiency noiseless operations at variable loads, with a full complement of extra features too! Note: The motor direction is reversed with respect to the A4988 and DRV8825 based drivers. You can make changes to the software or mirror the motor pins (hardware).

Features:

  1. Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted
  2. Only SPI support
  3. Broken down into 256
  4. Combines maximum efficiency and best motor torque for noiseless operation.
  5. High-precision sensorless motor load detection.
  6. Reduce energy consumption by 75%.
  7. High-load drive without out-of-step.

Package Includes:

1 x TMC2130 V1.1 stepper motor driver.

1 x Heat Sink.

1x Screwdriver.

Quick specs

Model Series
TMC Series
Voltage Rating (V)
5.5 to 45 VDC
Current Rating (A)
1.2 to 2.5
Logic Voltage (V)
3 ~ 5
Single Phase Current (A)
1.2
Micro Step
1/256
See all specifications