
1 / 4 · Click to enlarge
AI Summary
A TMC Series stepper driver module rated 4.75-28VDC with 2.8A RMS and 4.0A peak output, up to 1/256 microstepping and UART configuration. StealthChop2 delivers notably quiet low-speed motion for 3D printers, CNC and automation builds.
Key Highlights
- 4.75 to 28VDC input with 2.8A RMS and 4.0A peak drive
- Up to 1/256 microstepping for fine, precise positioning
- UART interface for configuration and driver communication
- StealthChop2 for quiet low-speed operation, SpreadCycle for high-speed torque
- StallGuard stall detection and CoolStep load-based current reduction
- 3.3V and 5V logic compatible for broad board support
Ideal For
- 3D printer owners upgrading axis or extruder drivers
- CNC and engraving machine builders tuning motion quality
- Automation and robotics developers needing UART-configurable drivers
- Makers building quiet low-speed stepper mechanisms
- Engineers wanting stall detection without end-stop switches
Buying Tip
Check your motor's rated current against the 2.8A RMS figure and confirm your controller provides 3.3V or 5V logic before ordering.
Elecvora expert review
Our verdict
A well-rounded stepper driver that pairs silent low-speed operation with UART configurability and useful diagnostics. It is a sensible choice for builders who want quiet motion and stall detection without extra hardware.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Quiet low-speed operation with StealthChop2
- UART access for configuration and diagnostics
- StallGuard and CoolStep add practical control options
- Wide 4.75 to 28VDC range and 3.3V/5V logic support
- Up to 1/256 microstepping for fine resolution
Cons
- Continuous current should be planned around the 2.8A RMS rating, not the 4.0A peak
- UART features need extra wiring and controller support
- Cooling may be needed for sustained high-current use
Best for
3D printers, CNC axes and automation builds needing quiet, configurable stepper control
Not ideal for
Very high-current motors beyond the module's RMS rating
Specifications
| Model Series | TMC Series |
|---|---|
| Voltage Rating (V) | 4.75 to 28VDC |
| Current Rating (A) | 2.8 to 4 |
| Micro Step | Up to 1/256 micro stepping |
| Max Current (A) | 2.8A RMS, 4.0A peak |
| Logic Voltage (V) | 3.3V and 5V compatible |
| Interface | UART (Universal Asynchronous Receiver/Transmitter) interface |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 13 × 10 × 3 cm |
What's in the box
- 1 x TMC2209 V3.0 Stepper Motor Driver Module
Frequently Asked Questions
What voltage supply does this driver need?
Can I use it with 3.3V and 5V controllers?
What is the UART interface used for?
How much current can it deliver?
Does it support silent operation?
What is included in the package?
Overview
The TMC2209 V3.0 is a stepper motor driver module from the TMC Series, designed to sit between a controller board and a bipolar stepper motor. It accepts 4.75 to 28VDC and delivers up to 2.8A RMS with a 4.0A peak, giving it enough headroom for the motors commonly found in 3D printers, CNC machines and small automation rigs.
What sets this module apart is the combination of silent low-speed operation and configurable control. StealthChop2 keeps motor noise low during slow moves, while SpreadCycle is available when you need stronger torque characteristics at speed. Microstepping reaches 1/256, so motion can be very finely divided.
Key Features
- UART interface: communicate with the driver for configuration and status rather than relying only on jumpers.
- StealthChop2: quiet, smooth operation at low speeds.
- SpreadCycle: supports high-speed operation with good torque behaviour.
- StallGuard: detects motor stalls without end-stop switches.
- CoolStep: reduces motor current according to load, helping manage power and heat.
- Thermal protection: over-temperature detection and shutdown.
Specifications Explained
Voltage and current
The 4.75 to 28VDC input range covers typical 12V and 24V builds. The 2.8A RMS rating is the continuous figure to design around, while 4.0A is a peak value for short bursts. Plan your motor current and cooling with the RMS number in mind.
Microstepping
Support for up to 1/256 microstepping means each full step can be subdivided into 256 increments, which supports smoother motion and finer positioning resolution.
Logic and interface
The module works with both 3.3V and 5V logic, so it can be paired with a wide range of controllers. The UART interface allows serial communication with the driver, which is useful for tuning and reading diagnostics.
Compatibility and Requirements
You need a controller board that provides step and direction signals, a suitable motor supply within 4.75 to 28VDC, and logic at 3.3V or 5V. UART features require the driver to be wired to a compatible serial connection on your controller. Confirm that your motor's rated current is within the module's 2.8A RMS capability.
Typical Uses
- 3D printer extruder and axis driver upgrades
- CNC router and engraver axes
- Automation and motion-control prototypes
- Projects needing quiet low-speed stepper motion
- Setups wanting stall detection without end stops
What's in the Box
1 x TMC2209 V3.0 Stepper Motor Driver Module.
Quick specs
- Model Series
- TMC Series
- Voltage Rating (V)
- 4.75 to 28VDC
- Current Rating (A)
- 2.8 to 4
- Micro Step
- Up to 1/256 micro stepping
- Max Current (A)
- 2.8A RMS, 4.0A peak
- Logic Voltage (V)
- 3.3V and 5V compatible













