Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This stepper motor drivers is a good fit for 3D printing users. Main specs: item type DM Series Motor Driver; current rating (a) 7.2; max current (a) 7.2. Check that your power source supplies 20 to 50VDC before connecting it.

Key Highlights

  • Item Type: DM Series Motor Driver
  • Current Rating (A): 7.2
  • Max Current (A): 7.2

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeDM Series Motor Driver
Voltage Rating (V)20 to 50VDC
Current Rating (A)7.2
Max Current (A)7.2
Resolution0.1A
Subdivision Range 400~25600 ppr
Impulse Response Frequency 200 KHz
Input Voltage (V)20-50 VDC
Shipping Weight0.272 kg
Shipping Dimensions14 × 10 × 4 cm

Overview

The Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories is listed in our stepper motor drivers range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: DM Series Motor Driver
  • Voltage Rating (V): 20 to 50VDC (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 7.2 (your supply must deliver at least this much current)
  • Max Current (A): 7.2 (your supply must deliver at least this much current)
  • Resolution: 0.1A
  • Subdivision Range:  400~25600 ppr (quoted range is usually line-of-sight; walls and interference shorten it)
  • Impulse Response Frequency:  200 KHz (make sure the rest of your system works at this frequency)
  • Input Voltage (V): 20-50 VDC (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories is a versatility fully digital stepping drive based on a DSP with an advanced control algorithm. The DM556 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque, and nulls mid-range instability. Motor self-test and parameter auto-setup technology offer optimum responses with different motors and easy-to-use. The advantage of using the DM556 Stepper Motor Driver is to control the speed and position of the stepper motor. These kinds of drivers can be used for a small range of stepper motors. Using these kinds of drivers one can minimize the code and connections. In this driver, a new feature has been added where we can set the current Mode.SW4 is used for this purpose. OFF meaning that the standstill current is set to be half of the selected dynamic current, and ON meaning that the standstill current is set to be the same as the selected dynamic current. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the DM556 an ideal solution for applications that require low-speed smoothness.

Features: 

  1. Can drive 4-wire, 8-wire two-phase stepper motor
  2. Signal input: PUL+ and PUL- are the positive and negative ends of the control pulse signals; the DIR+ and DIR- are the positive and negative ends of the directional signal; ENA+ and ENA- are the positive and negative ends of the enabling signals.
  3.  Power-on parameter auto-tuning function
  4. Precision current control greatly reduces motor heating
  5. The current is automatically halved at rest
  6. Built-in micro-segment
  7. Optically isolated signal input, strong anti-interference ability
  8. With overvoltage, overcurrent and other protection functions
  9.  Power supply is greater than 200W. Recommend 20-50 VDC.

Applications:

  1. Laser cutters
  2. Laser markers
  3. High precision X-Y tables
  4. Labelling machines, etc.

Package Includes:

1 x Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories

Quick specs

Item Type
DM Series Motor Driver
Voltage Rating (V)
20 to 50VDC
Current Rating (A)
7.2
Max Current (A)
7.2
Resolution
0.1A
Subdivision Range
 400~25600 ppr
See all specifications