
1 / 5 · Click to enlarge
AI Summary
A compact 0.85inch IPS display with 128×128 resolution and 65K color that also acts as a tactile mechanical key. It connects over 4-wire SPI using the ST7735 driver, making it a neat display-and-input module for embedded control panels.
Key Highlights
- 0.85inch IPS panel with 128×128 pixel resolution
- 65K color output for clear, vivid small-format visuals
- ST7735 controller driven over a 4-wire SPI interface
- 2.5D tempered glass front for clarity and scratch resistance
- Mechanical switch rated for 50 million actuations
- Works with Raspberry Pi, Arduino, ESP32, RP2040 and STM32
Ideal For
- Embedded developers building compact control panels
- Makers creating smart home wall switches and interfaces
- Raspberry Pi and Arduino users adding a display-plus-button module
- Product designers prototyping interactive front panels
- Engineers building status indicators with input in one part
Buying Tip
Confirm your board has a free 4-wire SPI bus and 3.3V logic before ordering, since the module is not a USB plug-and-play display.
Elecvora expert review
Our verdict
This is a well-focused module for anyone who needs a tiny screen and a physical button in the same cutout. The IPS panel, ST7735 driver and 50-million-press switch rating make it a practical choice for panel-mounted interfaces.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Square 128×128 IPS panel with 65K color
- Simple 4-wire SPI connection using the ST7735 controller
- Tempered glass front and long switch lifespan
- Wide platform support across Raspberry Pi, Arduino, ESP32, RP2040 and STM32
- Compact 35 × 25 × 20 mm body with included cable
Cons
- Small 0.85inch screen limits how much text can be shown
- Requires 3.3V supply and a free SPI bus, so it is not plug-and-play
- Needs software setup with an ST7735-compatible library
Best for
Compact display-and-button interfaces in embedded and maker projects
Not ideal for
Users wanting a large readout or a no-code USB display
Specifications
| Shipping Weight | 0.03 kg |
|---|---|
| Shipping Dimensions | 8 × 7 × 3 cm |
What's in the box
- 1 x Waveshare 0.85inch Mechanical LCD ScreenKey, IPS Panel, 128 × 128 Resolution, 65K Color, SPI Communication Interface
- 1 x MX1.25 9PIN 200mm cable
Frequently Asked Questions
What voltage does the ScreenKey need?
How does it connect to a microcontroller?
Which development platforms are supported?
What display driver does it use?
How durable is the mechanical switch?
What is included with the module?
Overview
The Waveshare 0.85inch Mechanical LCD ScreenKey is a small combined display and input device for embedded projects. A square IPS panel sits behind a 2.5D tempered glass front, and the whole module is built around a mechanical switch, so one component can both show information and accept a press. At 128×128 pixels with 65K color, the screen is suited to icons, status readouts, simple menus and short labels rather than large amounts of text.
Key Features
- IPS display: a 15.21 × 15.21 mm active area with 118.8 × 118.8 μm pixels gives a crisp, evenly lit image.
- ST7735 driver: the onboard controller handles the panel and keeps host-side code straightforward.
- 4-wire SPI interface: a serial connection that keeps pin usage low on the host board.
- Tactile mechanical switch: 50 ± 10 gf actuation force, 1.20 ± 0.30 mm actuation travel and a 2.80 ± 0.25 mm total travel.
- Long service life: the switch is rated for 50 million presses.
- Compact body: 35 × 25 × 20 mm and 14 g, easy to fit into tight enclosures and front panels.
Specifications Explained
The 3.3V operating voltage means the module is designed for the logic levels used by most modern development boards, such as Raspberry Pi, ESP32, RP2040 and STM32 boards. The 128×128 resolution is square, which suits symmetrical layouts like dials, gauges and icon grids. 65K color is enough for gradients and clear colour coding without a large memory footprint. The 4-wire SPI link carries display data and keeps the wiring simple, while the ST7735 controller is a well-known part that fits existing small-display workflows. The switch figures describe a light, short-travel key: about 50 gf to actuate and roughly 2.8 mm to bottom out, with a 15.50 mm spring inside.
Compatibility and Requirements
The module is listed as supporting Raspberry Pi, Arduino, ESP32, RP2040 and STM32 development platforms. It communicates over 4-wire SPI and needs a 3.3V supply. The included MX1.25 9-pin 200mm cable provides the connection between the module and your host board. Check that your board has a spare SPI bus and enough free GPIO for the control lines before planning an enclosure.
Typical Uses
Because the screen and the key share one body, the module suits control panels, smart home wall interfaces, creative tools and industrial front panels. It can act as a labelled push button with a changeable icon, a status indicator that also accepts input, or a compact menu control in a multi-key layout.
What's in the Box
- 1 × Waveshare 0.85inch Mechanical LCD ScreenKey
- 1 × MX1.25 9PIN 200mm cable




















