
1 / 4 · Click to enlarge
At a glance
Made by WAVESHARE, this oled display is a good fit for everyday home and hobby use. Main specs: display size (inch) 0.96; interface 3-wire spi, 4-wire spi, i2c; viewing angle (deg.) >160°. Check that your power source supplies 3.3V / 5V before connecting it.
Key Highlights
- Display Size (Inch): 0.96
- Interface: 3-wire spi, 4-wire spi, i2c
- Viewing Angle (Deg.): >160°
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Display Size (Inch) | 0.96 |
|---|---|
| Display Resolution (pixel) | 128 × 64 |
| Interface | 3-wire spi, 4-wire spi, i2c |
| Viewing Angle (Deg.) | >160° |
| Operating Temperature (°C) | -20 to 70°C |
| Storage Temperature (°C) | -30°C~80°C |
| Operating Voltage (V) | 3.3V / 5V |
| Length (mm) | 33 |
| Width (mm) | 33 |
| Weight (g) | 5 |
| Color | 1/4 yellow section, 3/4 blue section |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 4 × 4 × 1 cm |
Overview
The Waveshare 0.96 Inch OLED Display (B), made by WAVESHARE, is listed in our oled display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Display Size (Inch): 0.96 (measured diagonally; compare with the space you have before ordering)
- Display Resolution (pixel): 128 × 64 (measured diagonally; compare with the space you have before ordering)
- Interface: 3-wire spi, 4-wire spi, i2c (confirm your cable or board uses the same connector)
- Viewing Angle (Deg.): >160°
- Operating Temperature (°C): -20 to 70°C
- Storage Temperature (°C): -30°C~80°C (space for firmware, files or media)
- Operating Voltage (V): 3.3V / 5V (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 33 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a Waveshare 0.96 Inch OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface. 
Pin Definition:
1.GND: Power ground 2.VCC: Power positive 3.SCL: Serial Clock Line 4.SDA: Serial Data wire.
Note:
To use this display, please follow this tutorial for hardware and software setup. If getting error no such file or directory check your file path then update in the raspberry pi terminal.
Features:
- Better quality
- The IIC address can be changed, it is convenient to use with different machines.
- Four square holes are easy to install
Package Includes:
1 x 0.96 Inch OLED Display (B)
Quick specs
- Display Size (Inch)
- 0.96
- Display Resolution (pixel)
- 128 × 64
- Interface
- 3-wire spi, 4-wire spi, i2c
- Viewing Angle (Deg.)
- >160°
- Operating Temperature (°C)
- -20 to 70°C
- Storage Temperature (°C)
- -30°C~80°C


















