
1 / 4 · Click to enlarge
AI Summary
A compact 0.96-inch OLED module with 128×64 resolution, SSD1315 driver and switchable 4-wire SPI or I2C communication. Its yellow-over-blue Version C layout keeps text and simple graphics clear on a small, narrow-bezel board.
Key Highlights
- 0.96-inch OLED panel with 128×64 pixel resolution
- Selectable 4-wire SPI or I2C communication interface
- SSD1315 controller with onboard voltage translator
- Dual-colour Version C layout: yellow upper, blue lower
- Runs from 3.3V or 5V with matching IO logic level
- Wide viewing angle above 160 degrees
Ideal For
- Makers building compact Arduino or Raspberry Pi status displays
- Students learning SPI and I2C display interfacing
- Engineers adding a small readout to STM32 projects
- DIY enthusiasts building handheld sensor or measurement tools
Buying Tip
Decide whether you will use SPI or I2C before wiring, since the interface choice affects how many pins you need and how the module is configured in your code.
Elecvora expert review
Our verdict
A tidy, well-documented little OLED module that covers the basics without fuss. The dual SPI/I2C interface and 3.3V/5V support make it easy to drop into a wide range of microcontroller projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 128×64 OLED output on a compact board
- Choice of 4-wire SPI or I2C communication
- Works with 3.3V and 5V supplies
- Onboard voltage translator simplifies level matching
- Wide viewing angle above 160 degrees
Cons
- Small 0.96-inch screen limits how much text fits
- Two-colour zones are fixed, not full colour
- Requires a host microcontroller and separate wiring
Best for
Makers and engineers needing a small status or data display
Not ideal for
Projects that need a large or full-colour screen
Specifications
| Display Size (Inch) | 0.96 |
|---|---|
| Display Resolution (pixel) | 128 × 64 |
| Operating Voltage (V) | 3.3V/5V (IO high-level voltage is as same as the power supply.) |
| Communication Interface | 4-wire SPI / I2C |
| Screen Type | OLED |
| Main Control Chip | SSD1315 |
| Outline Dimensions | 26.0mm × 26.0mm |
| Operating Temperature (°C) | -20°C ~ 70°C |
| Storage Temperature (°C) | -30°C ~ 80°C |
| Viewing Angle (Deg.) | > 160° |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x Waveshare 0.96-inch OLED Display Module, 128×64 Resolution, SPI/I2C Communication, Version C (upper yellow and lower blue)
Frequently Asked Questions
What resolution does this OLED module offer?
Can I use either SPI or I2C?
What voltage does it need?
Which controller drives the display?
What is included in the package?
What temperatures can it handle?
Overview
The Waveshare 0.96-inch OLED display module gives small electronic projects a clear, self-illuminating screen without adding much bulk. The panel measures 0.96 inches diagonally and renders 128×64 pixels, which is enough room for status lines, sensor readings, menus and simple graphs. The Version C variant splits the display into two colour zones: a yellow band across the upper section and blue below it, so you can separate headers or labels from live data at a glance.
Behind the panel sits the SSD1315 main control chip, and the board includes an onboard voltage translator. That combination makes the module straightforward to wire into 3.3V and 5V systems alike, since the IO high-level voltage follows the supply you choose.
Key Features
- 128×64 OLED panel: crisp text and basic graphics on a 0.96-inch screen
- Dual interface: use 4-wire SPI or I2C depending on your project
- SSD1315 controller: the display driver at the heart of the module
- Flexible power: operates from 3.3V or 5V, with IO levels matching the supply
- Compact outline: 26.0mm × 26.0mm board with an ultra-narrow bezel
- Wide viewing angle: over 160 degrees for readable output from most positions
Specifications Explained
The 128×64 resolution is the practical detail most buyers care about: it gives you 128 columns and 64 rows of pixels, plenty for several lines of text or a small chart. The 0.96-inch size keeps the module small enough for handheld enclosures and tight project boxes.
Communication is handled through either 4-wire SPI or I2C. SPI generally suits projects that refresh the screen frequently, while I2C uses fewer signal lines when wiring space is limited. The SSD1315 controller handles the display driving, and the onboard voltage translator helps the board work across 3.3V and 5V systems. Operating temperature is rated from -20°C to 70°C, with storage from -30°C to 80°C, so the module is intended for normal indoor and sheltered electronics use rather than extreme environments.
Compatibility and Requirements
The module is designed for embedded development boards and microcontroller projects. Waveshare supplies online development resources, including examples for Raspberry Pi, Arduino and STM32, so you can follow the provided setup tutorial for software configuration. You will need a host board with an available SPI or I2C interface and a suitable 3.3V or 5V supply. Because the IO high-level voltage matches the power supply, plan your logic levels around the voltage you intend to use.
Typical Uses
This display fits projects such as sensor readouts, small status panels, portable measuring tools, menu interfaces and compact data loggers. The two-colour layout is useful when you want a fixed header area in yellow and changing values in blue below it. It also works well as a diagnostic screen during development, showing variables or connection states without a full monitor.
What's in the Box
Package contents: 1 x Waveshare 0.96-inch OLED Display Module, 128×64 Resolution, SPI/I2C Communication, Version C (upper yellow and lower blue).
Quick specs
- Display Size (Inch)
- 0.96
- Display Resolution (pixel)
- 128 × 64
- Operating Voltage (V)
- 3.3V/5V (IO high-level voltage is as same as the power supply.)
- Communication Interface
- 4-wire SPI / I2C
- Screen Type
- OLED
- Main Control Chip
- SSD1315


















