
1 / 3 · Click to enlarge
AI Summary
A compact 1.32-inch OLED module with 128×96 resolution, 16 gray scale and an SSD1327 driver, switchable between 4-wire SPI and I2C. Its onboard voltage translator lets it run from either 3.3V or 5V logic supplies.
Key Highlights
- 1.32-inch OLED panel with 128×96 pixel resolution
- 16 gray scale levels for smoother shading and text
- Selectable 4-wire SPI or I2C communication interface
- SSD1327 driver with onboard voltage translator
- Runs from a 3.3V or 5V supply
- Ultra-narrow bezel in a compact 34.3 × 30.5 mm module
Ideal For
- Makers building compact Arduino or STM32 projects
- Raspberry Pi users adding a small status display
- Students learning SPI and I2C display interfacing
- Product developers prototyping handheld device interfaces
- Electronics hobbyists designing custom front panels
Buying Tip
Confirm your display library supports the SSD1327 driver before purchase, since the module's 128×96 panel and gray scale output depend on controller-level support.
Elecvora expert review
Our verdict
A tidy, well-integrated OLED module that removes two common friction points: interface choice and voltage level shifting. It is a sensible pick when you need a small gray scale display with straightforward wiring.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Switchable 4-wire SPI and I2C interfaces
- Onboard voltage translator supports 3.3V and 5V supplies
- 16 gray scale levels improve text and graphics quality
- Compact 34.30 × 30.50 mm board with narrow bezel
- Development examples published for Raspberry Pi, Arduino and STM32
Cons
- 128×96 resolution limits detailed imagery
- Requires a library with SSD1327 support
- No enclosure or cabling included
Best for
Compact embedded displays in maker and prototype projects
Not ideal for
Applications needing high-resolution full-color graphics
Specifications
| Model No. / Name | OLED Display Module |
|---|---|
| Display Size (Inch) | 1.32 |
| Display Resolution (pixel) | 128 × 96 |
| Operating Voltage (V) | 3.3V / 5V |
| Display Panel | OLED |
| Pixel Size (um) | 0.19 × 0.19 mm |
| Communication Interface | 4-wire SPI / I2C |
| Driver | SSD 1327 |
| Module Size (LxWxH) mm | 34.30 × 30.50mm |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x Waveshare 1.32inch OLED Display Module, 128×96 Resolution, 16 Gray Scale, SPI / I2C Communication
Frequently Asked Questions
What interfaces does this display support?
What voltage does the module require?
Which driver chip does it use?
What is the display resolution and gray scale?
Are development examples available?
What is included in the package?
Overview
The Waveshare 1.32-inch OLED display module is a small, self-contained screen board for embedding visual output into electronic projects. Its OLED panel delivers 128×96 pixels at a pixel size of 0.19 × 0.19 mm, and it supports 16 gray scale levels, so text, icons and simple graphics render with more depth than a purely two-tone display. The board measures approximately 34.30 × 30.50 mm and uses an ultra-narrow bezel, which keeps the glass area visually dominant inside a panel cutout or handheld case.
Key Features
- SSD1327 driver: the display controller handles the 128×96 panel and gray scale rendering.
- Dual interface: choose 4-wire SPI or I2C, giving flexibility in pin count and wiring layout.
- Onboard voltage translator: the module accepts a 3.3V or 5V supply, simplifying use with different logic levels.
- Compact footprint: the 34.30 × 30.50 mm board fits tight enclosures.
- Development resources: Waveshare provides online examples for Raspberry Pi, Arduino and STM32.
Specifications Explained
The 128×96 resolution is the practical starting point: it is enough for several lines of text, sensor readouts, menus and small icons, but not for detailed images. The 16 gray scale levels matter when you want anti-aliased fonts or soft transitions in charts and gauges. The 0.19 × 0.19 mm pixel size is small, so the image stays crisp at close viewing distances.
Communication is handled either over 4-wire SPI, which typically uses more pins but suits faster refresh, or over I2C, which uses fewer signal lines and simplifies wiring when pins are scarce. The SSD1327 driver defines how your library addresses the panel, so choose software support for that controller. The onboard voltage translator means the same module can be powered from a 3.3V or 5V rail without an external level shifter.
Compatibility and Requirements
The module is intended for microcontroller and single-board computer projects, and Waveshare publishes development examples for Raspberry Pi, Arduino and STM32. You will need a host board with an available SPI or I2C bus, a 3.3V or 5V supply, and a display library that supports the SSD1327 driver. Wiring and pin assignment depend on the interface you select, so confirm the pinout before powering up.
Typical Uses
- Status and sensor readouts on embedded prototypes
- Compact user interfaces for handheld instruments
- Menu and settings displays in DIY electronics
- Learning projects covering SPI, I2C and display driving
- Small information panels in custom enclosures
What's in the Box
The package contains one Waveshare 1.32-inch OLED display module with 128×96 resolution, 16 gray scale and SPI/I2C communication.
Quick specs
- Model No. / Name
- OLED Display Module
- Display Size (Inch)
- 1.32
- Display Resolution (pixel)
- 128 × 96
- Operating Voltage (V)
- 3.3V / 5V
- Display Panel
- OLED
- Pixel Size (um)
- 0.19 × 0.19 mm


















