Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this e-ink paper display is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Display Module; display size (inch) 1.64; full refresh time (s) 12s. Check that your power source supplies 3.3V/5V before connecting it.

Key Highlights

  • Model No. / Name: Display Module
  • Display Size (Inch): 1.64
  • Full Refresh Time (s): 12s

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameDisplay Module
Display Size (Inch)1.64
Display Resolution (pixel)168 × 168
Full Refresh Time (s)12s
Operating Voltage (V)3.3V/5V
Display ColorRed/Yellow/Black/White
Interface3-wire SPI, 4-wire SPI
Grey level2
Outline dimension (mm)47 × 38mm
Refresh Power<57mW (typ.)
Dot Pitch0.176 × 0.176mm
Viewing Angle (Deg.)>170°
Shipping Weight0.024 kg
Shipping Dimensions7 × 5 × 2 cm

Overview

The Waveshare 1.64inch square E-Paper Module (G) 168×168 Red/Yellow/Black/White, made by WAVESHARE, is listed in our e-ink paper display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Display Module (measured diagonally; compare with the space you have before ordering)
  • Display Size (Inch): 1.64 (measured diagonally; compare with the space you have before ordering)
  • Display Resolution (pixel): 168 × 168 (measured diagonally; compare with the space you have before ordering)
  • Full Refresh Time (s): 12s
  • Operating Voltage (V): 3.3V/5V (match this to your power supply; too high a voltage can damage the part)
  • Display Color: Red/Yellow/Black/White (measured diagonally; compare with the space you have before ordering)
  • Interface: 3-wire SPI, 4-wire SPI (confirm your cable or board uses the same connector)
  • Grey level: 2

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

1.64inch Square E-Paper Module (G), 168 × 168, Red/Yellow/Black/White. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in the clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light requires no backlight and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Features:

  1. No backlight keeps displaying the last content for a long time even when power down
  2. Ultra-low power consumption, basically power is only required for refreshing
  3. SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  4. Onboard voltage translator, compatible with 3.3V/5V MCUs
  5. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Package Includes:

1 x 1.64inch e-Paper Module

1 x PH2.0 20cm 8Pin

Quick specs

Model No. / Name
Display Module
Display Size (Inch)
1.64
Display Resolution (pixel)
168 × 168
Full Refresh Time (s)
12s
Operating Voltage (V)
3.3V/5V
Display Color
Red/Yellow/Black/White
See all specifications

More from WAVESHARE

View all →

Related Products

View all →