
1 / 7 · Click to enlarge
AI Summary
A 2.8-inch fully laminated capacitive touch display baseboard for the Raspberry Pi Compute Module 4, with camera, HDMI, USB and microSD connections built in. It lets you build a complete CM4 device around one compact board.
Key Highlights
- 2.8-inch fully laminated IPS display with 5-point capacitive touch
- 6H toughened glass panel for safer everyday use
- Onboard socket accepts all variants of Compute Module 4
- MIPI CSI 22-pin 0.5mm camera connector and micro HDMI 4K 30fps output
- USB 2.0 port plus microSD socket for CM4 Lite modules
- 5V power input via USB Type-C interface
Ideal For
- Embedded developers building compact CM4 panel devices
- Makers creating digital signage or thin client terminals
- Industrial automation engineers needing a touch interface
- Prototypers adding camera vision to a small display build
- Raspberry Pi enthusiasts working with Compute Module 4 hardware
Buying Tip
Confirm which CM4 variant you own before ordering: eMMC modules boot from onboard storage, while Lite modules need a microSD card in the board's socket.
Elecvora expert review
Our verdict
A tidy, purpose-built carrier that removes most of the mechanical work from a small CM4 screen project. It is at its best when you need touch, camera input and video output in one compact assembly rather than maximum screen size.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fully laminated 2.8-inch capacitive touch panel with toughened glass
- Accepts all Compute Module 4 variants
- Camera, micro HDMI, USB 2.0 and microSD connectivity on one board
- Compact footprint suited to embedded and panel builds
Cons
- Compute Module 4 is not included
- 2.8-inch screen is small for anything beyond compact interfaces
- Requires a separate 5V USB Type-C power source
Best for
Compact CM4 devices needing a touchscreen, camera input and video output in one board
Not ideal for
Users wanting a large desktop display or a complete plug-and-play computer
Specifications
| Item Type | Display |
|---|---|
| Display Size (Inch) | 2.8 |
| Touchscreen (Y/N) | Yes |
| Power Input | 5V |
| Additional Specs. | CM4 Socket: suitable for all variants of Compute Module 4 |
| USB | USB 2.0 × 1 |
| Connector Type | MIPI CSI 22PIN 0.5mm camera connector |
| Video | micro HDMI × 1, supports 4K 30fps output |
| Storage Capacity | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 5 × 4 cm |
What's in the box
- 1 x Waveshare 2.8" Touch Screen Expansion for Raspberry Pi Compute Module 4
Frequently Asked Questions
Does this kit include the Raspberry Pi Compute Module 4?
Which Compute Module 4 versions are supported?
How is the board powered?
Can I connect a camera?
What video output does it offer?
How should I set it up for the first time?
Overview
The Waveshare 2.8" Touch Screen Expansion is a carrier baseboard built around the Raspberry Pi Compute Module 4. Instead of assembling a display, a carrier and a camera separately, you seat a CM4 module directly on the board and get a working screen-based system. The 2.8-inch display is fully laminated, which keeps the touch layer and the panel close together for a cleaner image and a more direct touch response, and the front is covered with 6H toughened glass.
Because the board accepts all variants of the Compute Module 4, it works with both eMMC and Lite versions. The onboard microSD socket is there for Lite modules that have no built-in storage. Power is supplied through a 5V USB Type-C input, and the board also exposes a camera connector, a micro HDMI output and a USB 2.0 port.
Key Features
- Fully laminated 2.8-inch touch display: 5-point capacitive touch control with wide viewing angles and fast response.
- 6H toughened glass: a harder front surface for daily handling.
- Direct CM4 mounting: the socket suits every variant of the Compute Module 4.
- Camera ready: a MIPI CSI 22-pin 0.5mm connector for a Raspberry Pi camera module.
- Video output: micro HDMI port supporting 4K at 30fps.
- Expansion and storage: one USB 2.0 port and a microSD socket for CM4 Lite modules.
Specifications Explained
Display size and touch: at 2.8 inches the screen suits compact panels and handheld builds where space is limited. Capacitive touch with five points means gestures and multi-finger input are possible, not just single taps.
Power input: the board takes 5V through USB Type-C, so a standard 5V USB supply arrangement can be used.
Camera connector: the 22-pin 0.5mm MIPI CSI connector is the interface used by Raspberry Pi camera modules, letting you add vision to the same board as the screen.
Video: the micro HDMI port outputs up to 4K at 30fps, useful when you want to drive a larger external monitor alongside the built-in display.
Storage: the microSD socket matters only for CM4 Lite variants without eMMC; modules with onboard eMMC use their own storage.
Compatibility and Requirements
This board is designed for the Raspberry Pi Compute Module 4 and is stated to suit all variants of that module. A CM4 module is required and is not included. CM4 Lite variants without eMMC rely on the microSD socket for storage. Power is supplied at 5V via USB Type-C. Waveshare publishes separate hardware setup and software setup tutorials for this board, which are worth following before first boot.
Typical Uses
The Compute Module 4 platform is intended for industrial and embedded work, and this board fits that role: digital signage players, thin client terminals, process automation interfaces and compact prototype devices that need a screen, camera input and network-capable compute in one assembly. It is equally useful for makers who want a tidy CM4 desktop or panel build without custom wiring.
What's in the Box
- 1 x Waveshare 2.8" Touch Screen Expansion for Raspberry Pi Compute Module 4
The Compute Module 4 itself, a camera module, a power supply and a microSD card are not included.
Quick specs
- Item Type
- Display
- Display Size (Inch)
- 2.8
- Touchscreen (Y/N)
- Yes
- Power Input
- 5V
- Additional Specs.
- CM4 Socket: suitable for all variants of Compute Module 4
- USB
- USB 2.0 × 1


















