
1 / 3 · Click to enlarge
AI Summary
A 1.54-inch IPS TFT display module with 240×240 resolution, 65K colour and an SPI-driven ST7789 controller. It runs from 3.3V or 5V logic and needs only a few GPIO pins, making it easy to add a small colour screen to compact projects.
Key Highlights
- 1.54-inch IPS panel with a square 240×240 pixel resolution
- ST7789 driver IC with a simple SPI interface
- 65K RGB colour for clear icons, text and graphics
- On-board 3.3V regulator and 3/5V level shifter
- Backlight control circuit included on the breakout
- Compact 50 × 34 mm board weighing around 16 g
Ideal For
- Makers adding a colour status screen to microcontroller projects
- Electronics students learning SPI display driving
- Designers building compact handheld instruments
- Hobbyists creating custom control panels and gauges
- Developers who need a square display with limited GPIO
Buying Tip
Check that your project has a free SPI bus and confirm the pinout of your board before soldering headers, since the module arrives with the panel attached but without a connector fitted.
Elecvora expert review
Our verdict
A tidy, well-integrated display module that removes the usual level-shifting and regulator headaches from small SPI screens. The square IPS panel is sharp and colourful, and the ST7789 controller keeps software support straightforward.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Square 240×240 IPS panel with good colour and viewing angles
- On-board 3.3V regulator and 3/5V level shifter simplify wiring
- SPI interface uses very few GPIO pins
- Backlight control circuit included
- Demo code covers rotation, drawing primitives and images
Cons
- No header pins mentioned, so soldering may be needed
- Small 1.54-inch screen limits the amount of text shown at once
- Requires a host microcontroller with an SPI bus
Best for
Compact embedded projects needing a bright square colour display
Not ideal for
Applications requiring a large touchscreen interface
Specifications
| Model No. / Name | LCD Display Module |
|---|---|
| Display Size (Inch) | 1.54 |
| Display Resolution (pixel) | 240 × 240 |
| Driver IC | ST7789 |
| Interface | SPI |
| Display Color | RGB, 65K color |
| Length (mm) | 50 |
| Width (mm) | 34 |
| Weight (g) | 16 |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 7 × 5 × 2.3 cm |
What's in the box
- 1 × Waveshare 240×240 General 1.54inch LCD Display Module IPS 65K RGB
Frequently Asked Questions
What resolution and panel type does this display use?
Which driver IC and interface does the module use?
Can I use it with 5V logic?
Does the module include backlight control?
What is included in the package?
What kind of code examples are available?
Overview
The Waveshare 1.54-inch LCD display module is a small, self-contained TFT screen designed to add a colourful visual interface to embedded projects. The panel is an IPS type with a square 240×240 pixel layout and 65K RGB colour, so text, icons and simple graphics stay readable across a wide viewing angle.
Everything needed to drive the display sits on the breakout board: an ST7789 controller, a 3.3V low-dropout regulator and a 3/5V level shifter. The result is a module that accepts either 3.3V or 5V logic and power, while the host only needs to provide an SPI bus and a handful of control pins.
Key Features
- Square 240×240 IPS panel with 65K colour output
- ST7789 driver IC communicating over SPI
- Few GPIO pins required, leaving room for other peripherals
- 3.3V and 5V operation supported by the on-board regulator and level shifter
- Backlight control circuit for managing the display illumination
- Display pre-attached to the breakout via a flex connector
Specifications Explained
Resolution and panel type
240×240 pixels gives a perfectly square canvas, which suits gauges, status panels, menus and small graphics. Because the panel is IPS, colours remain consistent when viewed from the side rather than shifting as they can on older TN panels.
Driver and interface
The ST7789 is a well-known controller for small colour TFT panels. It is driven here over SPI, which keeps wiring simple and pin usage low. The same driver is used on every unit, so code written for one module should behave the same way on another.
Colour depth
65K RGB colour is enough for smooth gradients, coloured icons and readable interface elements without the memory overhead of a full 24-bit framebuffer.
Size and weight
The board measures about 50 mm by 34 mm and weighs roughly 16 g, so it fits into handheld devices, small enclosures and panel-mounted projects where space is tight.
Compatibility and Requirements
The module works with 3.3V or 5V power and logic levels thanks to the on-board regulator and level shifter. A host device with an SPI interface and a few spare GPIO pins is required. Demo code is provided that covers picture rotation, drawing dots, lines, circles and rectangles, and displaying images, which gives a starting point for your own firmware.
Typical Uses
- Status and sensor readouts on microcontroller projects
- Small user interfaces for handheld or bench instruments
- Compact information panels in custom enclosures
- Learning projects involving SPI displays and graphics routines
What's in the Box
1 × Waveshare 240×240 General 1.54-inch LCD Display Module, IPS, 65K RGB.

Quick specs
- Model No. / Name
- LCD Display Module
- Display Size (Inch)
- 1.54
- Display Resolution (pixel)
- 240 × 240
- Driver IC
- ST7789
- Interface
- SPI
- Display Color
- RGB, 65K color


















