
1 / 3 · Click to enlarge
AI Summary
A 3.5 inch resistive touch LCD with HDMI input and 480x320 hardware resolution that connects directly to any Raspberry Pi revision or works as a small computer monitor. The 100-level backlight control and 170 degree viewing angle keep it readable while you tune brightness for your workspace.
Key Highlights
- 3.5 inch resistive touch panel with HDMI video input
- 480x320 hardware resolution, configurable in software
- 170 degree viewing angle for flexible placement
- 100-level backlight adjustment with multi-language OSD
- Direct connection to any Raspberry Pi revision
- Compact 85 x 56.5 mm board weighing 75 g
Ideal For
- Raspberry Pi makers building compact dashboards and status panels
- Retropie and retro gaming handheld builders
- Electronics hobbyists adding a small touch interface to a project
- Technicians who need a portable HDMI test monitor
- Students learning embedded displays and touch input
Buying Tip
Check which HDMI port your board uses and confirm you have the matching connector, since touch input works only when the panel's I/O lines are also connected.
Elecvora expert review
Our verdict
A tidy, well-supported small display that handles both Raspberry Pi projects and plain HDMI monitor duty. The resistive touch layer and wide viewing angle make it a sensible pick for embedded interfaces where space is tight.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Direct connection to any Raspberry Pi revision
- Drivers provided for Raspbian, Ubuntu, Kali and Retropie
- 100-level backlight control and multi-language OSD
- Wide 170 degree viewing angle
- Light 75 g board with compact 85 x 56.5 mm footprint
Cons
- Touch input is unavailable when used as a computer monitor over HDMI
- Resistive panel needs pressure rather than a light fingertip tap
- OSD and touch wiring add setup steps beyond plugging in HDMI
Best for
Raspberry Pi dashboards, retro gaming builds and compact touch interfaces
Not ideal for
Users who want a large plug-and-play touch monitor with no driver setup
Specifications
| Model No. / Name | HDMI LCD Display |
|---|---|
| Touch Type | Resistive |
| Display Size (Inch) | 3.5 |
| HDMI Output | Yes |
| Viewing Angle (Deg.) | 170º |
| Length (mm) | 85 |
| Width (mm) | 56.5 |
| Weight (g) | 75 |
| Shipping Weight | 0.092 kg |
| Shipping Dimensions | 9 × 6 × 2 cm |
What's in the box
- 1 x 3.5 inch HDMI LCD
- 1 x HDMI connector
- 1 x HDMI to micro HDMI connector
- 1 x Touch pen
- 1 x Aluminium heat sink
- 1 x Quick start sheet
Frequently Asked Questions
Does the touch panel work when I connect it to a computer?
Which operating systems are supported?
Can I change the 480x320 resolution?
What comes in the package?
How do I adjust brightness?
Do I need to connect anything besides HDMI?
Overview
The Waveshare 3.5 inch resistive HDMI LCD is a compact display module built around a 480x320 panel with a resistive touch layer and an HDMI input. It is designed to plug directly into any revision of Raspberry Pi, and it can also serve as a small monitor for a computer when connected by HDMI cable. At 85 mm long, 56.5 mm wide and just 75 g, it fits neatly into handheld projects, panel cutouts and bench setups where a full-size monitor would be impractical.
Key Features
- Resistive touch control for stylus or fingertip input, supplied with a touch pen.
- 480x320 hardware resolution that can be changed through software settings.
- Wide 170 degree viewing angle so the screen stays legible from the side.
- 100-level backlight adjustment and a multi-language OSD menu for brightness, contrast and power management.
- HDMI audio output supported alongside the video signal.
- FBCP software driver support for custom software resolution and dual-display configurations.
Specifications Explained
The 3.5 inch diagonal keeps the module small enough for embedded builds while the 480x320 resolution suits text consoles, status readouts and simple interfaces. Because the resolution is software configurable, you can raise it in the operating system if your application needs more desktop space, and the panel accepts settings up to 1920x1080 in software. The 170 degree viewing angle means the image holds up when the screen is angled away from you, which matters in handheld and panel-mounted installations. Backlight control across 100 levels lets you dim the display for dark rooms or brighten it for daylight. The HDMI interface carries the picture and needs no I/O pins, although the touch panel still uses I/O connections.
Compatibility and Requirements
The display connects directly to any revision of Raspberry Pi, and drivers are provided for Raspbian, Ubuntu, Kali and Retropie. When used as a computer monitor over an HDMI cable, the touch panel is not available, so plan on a keyboard and mouse for that mode. HDMI connectors are included for both standard HDMI and micro HDMI ports, covering different board layouts.
Typical Uses
Common applications include Raspberry Pi dashboards, retro gaming builds running Retropie, compact system monitors, portable test equipment and any project that needs a small touch interface with an HDMI signal path.
What's in the Box
- 1 x 3.5 inch HDMI LCD
- 1 x HDMI connector
- 1 x HDMI to micro HDMI connector
- 1 x Touch pen
- 1 x Aluminium heat sink
- 1 x Quick start sheet

Quick specs
- Model No. / Name
- HDMI LCD Display
- Touch Type
- Resistive
- Display Size (Inch)
- 3.5
- HDMI Output
- Yes
- Viewing Angle (Deg.)
- 170º
- Length (mm)
- 85


















