Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this e-ink paper display is a good fit for everyday home and hobby use. Main specs: model no. / name Display HAT; display size (inch) 3.52; viewing angle (deg.) >170°.

Key Highlights

  • Model No. / Name: Display HAT
  • Display Size (Inch): 3.52
  • Viewing Angle (Deg.): >170°

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Model No. / NameDisplay HAT
Display Size (Inch)3.52
Display Resolution (pixel)360 × 240
Viewing Angle (Deg.)>170°
Interface3-wire SPI, 4-wire SPI Grey Scale 2
Outline dimension (mm)86.5 × 57mm Full Refresh Time 1.5s
Refresh Power<25mW (typ.)
Shipping Weight0.15 kg
Shipping Dimensions11 × 8 × 3 cm

Overview

The Waveshare 3.52inch e-Paper HAT 360×240 SPI Interface, made by WAVESHARE, is listed in our e-ink paper display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Display HAT (measured diagonally; compare with the space you have before ordering)
  • Display Size (Inch): 3.52 (measured diagonally; compare with the space you have before ordering)
  • Display Resolution (pixel): 360 × 240 (measured diagonally; compare with the space you have before ordering)
  • Viewing Angle (Deg.): >170°
  • Interface: 3-wire SPI, 4-wire SPI Grey Scale 2 (confirm your cable or board uses the same connector)
  • Outline dimension (mm): 86.5 × 57mm Full Refresh Time 1.5s (measure your mounting space before ordering)
  • Refresh Power: <25mW (typ.)
  • Shipping Weight: 0.15 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

3.52inch E-Paper HAT, 360 × 240, SPI Interface. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in the clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light requires no backlight and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.

Features:

  1. No backlight keeps displaying last content for a long time even when power down
  2. Ultra-low power consumption, basically power is only required for refreshing
  3. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  4. SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
  5. Onboard voltage translator, compatible with 3.3V/5V MCUs
  6. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Useful link:

For Software setup, please follow this tutorial.

Package Includes:

1 x 3.52inch e-Paper HAT

1 x PH2.0 20cm 8Pin

Quick specs

Model No. / Name
Display HAT
Display Size (Inch)
3.52
Display Resolution (pixel)
360 × 240
Viewing Angle (Deg.)
&gt;170°
Interface
3-wire SPI, 4-wire SPI Grey Scale 2
Outline dimension (mm)
86.5 × 57mm Full Refresh Time 1.5s
See all specifications

More from WAVESHARE

View all →

Related Products

View all →