
1 / 4 · Click to enlarge
AI Summary
This 2.9-inch e-paper module delivers a 296x128 four-color display with SPI control and a driver board for easy microcontroller connection. It keeps the last image visible without power, making it ideal for low-energy status displays and labels.
Key Highlights
- 2.9-inch passively reflective e-paper with 296x128 pixel resolution
- Four-color output: red, yellow, black, and white
- SPI interface (3-wire or 4-wire) for simple MCU connectivity
- Retains image without power; only needs energy during refresh
- Wide >170° viewing angle for consistent readability
- Includes driver board with onboard voltage translator
Ideal For
- Makers building low-power status displays
- Engineers prototyping IoT devices
- Educators teaching e-paper technology
- Designers creating electronic labels
- Hobbyists using Raspberry Pi or Arduino
Buying Tip
Check that your project can accommodate the 2.9-inch display size and that you have a spare SPI interface; the four-color output is best for static content that updates occasionally.
Elecvora expert review
Our verdict
The Waveshare 33215 offers a practical four-color e-paper solution with easy SPI connectivity and a helpful driver board. Its low-power operation and image retention make it a solid choice for static displays.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four-color output adds visual flexibility
- Driver board simplifies voltage compatibility
- Ultra-low power with image retention
- Wide viewing angle
Cons
- Slow refresh rate not suitable for video
- Requires ambient light for visibility
- Limited to 2.9-inch size
Best for
Low-power information displays and labels
Not ideal for
Applications requiring fast updates or high-color graphics
Specifications
| Model No. / Name | 2.9inch E-Paper Display (G) |
|---|---|
| Display Size (Inch) | 2.9 |
| Display Resolution (pixel) | 296 × 128 |
| Display Color | Red / Yellow / Black / White |
| Viewing Angle (Deg.) | >170°.. |
| Interface | 3-wire SPI / 4-wire SPI |
| Display Type | Passively reflective e-Paper |
| Operating Voltage | Raw: 3.3V / With driver board: 3.3V–5V |
| Display Area (mm) | 66.89 × 29.05 mm |
| Dot Pitch | 0.135 × 0.135 mm |
| Length (mm) | 90 |
| Width (mm) | 37 |
| Weight (g) | 21 |
| Shipping Weight | 0.045 kg |
| Shipping Dimensions | 11 × 9 × 2 cm |
What's in the box
- 1 x Waveshare 33215 2.9inch 296x128 E-Paper Display (G)
- 1 x PH2.0 8PIN cable
Frequently Asked Questions
Does the display require a backlight?
What voltage does the module need?
Can I use this with an Arduino?
Does the image stay on screen when power is removed?
What is included in the package?
How often can I refresh the display?
Overview
The Waveshare 33215 is a 2.9-inch e-paper display module that uses ambient light to show content, much like paper. It has a resolution of 296x128 pixels and can display red, yellow, black, and white. Because it is passively reflective, it needs no backlight and consumes power only when the image is being refreshed. Once updated, the display holds its content even if power is removed, which makes it a practical choice for static or semi-static information panels.
Key Features
- Four-color e-paper: Shows red, yellow, black, and white for clear, attention-grabbing visuals.
- SPI interface: Supports 3-wire and 4-wire SPI, keeping wiring simple and compatible with many controllers.
- Driver board included: The onboard voltage translator allows operation from 3.3V to 5V, easing integration with 5V systems.
- Ultra-low power: Power is required only during refresh; the image stays visible with no power.
- Wide viewing angle: Greater than 170 degrees ensures readability from almost any position.
- Compact size: The module measures 90mm by 37mm and weighs just 21 grams.
Specifications Explained
The 2.9-inch diagonal and 296x128 resolution give a dot pitch of 0.135mm, which is suitable for text and simple graphics. The display area is 66.89mm by 29.05mm. The raw panel runs at 3.3V, but with the included driver board, you can supply 3.3V to 5V, making it easy to use with both 3.3V and 5V microcontrollers. The SPI interface means you only need a few data lines to control the display, and the driver board handles the voltage translation. The module’s small footprint and light weight make it easy to embed in portable or space-limited projects.
Compatibility and Requirements
The SPI interface is compatible with common controller platforms such as Raspberry Pi, Arduino, STM32, Jetson Nano, and ESP32 when used with the driver board. You will need a host microcontroller with SPI capability and a power source within the supported voltage range. No backlight is required, but the display relies on ambient light for visibility. Note that the display is not a fast-refresh screen; it is intended for content that changes infrequently.
Typical Uses
This e-paper module is well suited for electronic shelf labels, status indicators, portable weather stations, name badges, and other low-power information displays. It can also be used in IoT devices where power efficiency is important, or in educational projects to demonstrate e-paper technology.
What's in the Box
The package includes one Waveshare 33215 2.9-inch e-paper display (G) and one PH2.0 8-pin cable. The driver board is part of the display module assembly.
Quick specs
- Model No. / Name
- 2.9inch E-Paper Display (G)
- Display Size (Inch)
- 2.9
- Display Resolution (pixel)
- 296 × 128
- Display Color
- Red / Yellow / Black / White
- Viewing Angle (Deg.)
- >170°..
- Interface
- 3-wire SPI / 4-wire SPI


















