
1 / 4 · Click to enlarge
AI Summary
A 1.54 inch square IPS display module with 240x240 resolution and capacitive touch, driven by the ST7789S display chip over SPI and the CST816D touch controller over I2C. It gives compact embedded projects a bright, readable screen with reliable finger input using very few GPIO pins.
Key Highlights
- 1.54 inch IPS panel with 240x240 pixel resolution
- 262K colour output for smooth gradients and clear icons
- ST7789S display driver over a 4-wire SPI interface
- CST816D capacitive touch controller communicating over I2C
- Runs from 3.3V or 5V for flexible board pairing
- Compact 40.2 x 40.2 x 10 mm board weighing around 12 g
Ideal For
- Makers building compact touch interfaces on Raspberry Pi or Pico
- ESP32 and STM32 developers adding a small status display
- Arduino hobbyists creating handheld controllers and gauges
- Product prototypers needing a square IPS panel with finger input
Buying Tip
Check that your host board can spare one SPI bus and one I2C bus, and confirm its logic level before powering the module from 3.3V or 5V.
Elecvora expert review
Our verdict
A tidy, well-integrated module that pairs a sharp square IPS panel with responsive capacitive touch and keeps wiring simple through SPI and I2C. It is a sensible pick when you need a small touch interface and do not want to juggle two separate boards.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Sharp 240x240 IPS panel with wide viewing angles
- Separate display and touch buses simplify firmware
- Low GPIO usage thanks to 4-wire SPI and I2C
- Accepts both 3.3V and 5V supplies
- Compact 40.2 x 40.2 mm board with cables included
Cons
- Requires library and pin configuration work, not plug-and-play
- No enclosure or mounting hardware included
- Small 1.54 inch area limits how much information fits on screen
Best for
Compact embedded projects needing a small touch display
Not ideal for
Users wanting a ready-made consumer touchscreen device
Specifications
| Shipping Weight | 0.025 kg |
|---|---|
| Shipping Dimensions | 7 × 5 × 2 cm |
What's in the box
- 1 x Waveshare 34370 1.54 inch Touch LCD Module
- 1 x GH1.25 12-pin cable
- 1 x FFC 18-pin 0.5 mm pitch cable, 200 mm, same direction
Frequently Asked Questions
What interfaces does the module use?
Which boards can I use it with?
What voltage does it need?
What comes in the package?
Do I need a separate touch controller?
How should I care for the screen?
Overview
The Waveshare 34370 packs a 1.54 inch IPS display and a capacitive touch layer onto a single small board. The square 240x240 panel produces clear text and graphics, and the IPS construction keeps colours consistent when viewed from an angle. With 262K colour support, the screen handles interface elements, gauges and simple images without looking washed out.
Two separate controllers keep the design straightforward. The ST7789S drives the display over a 4-wire SPI bus, while the CST816D reads touch input and reports it over I2C. Splitting the two means touch handling does not interfere with screen refresh, and the SPI link keeps the number of occupied GPIO pins low.
Key Features
- Square IPS panel: 240x240 pixels in a 1.54 inch format, suited to compact enclosures.
- Capacitive touch: the CST816D controller responds to finger contact and communicates over I2C.
- Efficient wiring: 4-wire SPI for the display keeps pin usage modest on small boards.
- Dual voltage support: the module runs from a 3.3V or 5V supply.
- Compact footprint: 40.2 x 40.2 x 10 mm and roughly 12 g, easy to fit into handheld builds.
Specifications Explained
Resolution and size: 240x240 pixels on a 1.54 inch diagonal gives a dense, sharp picture for menus, sensor readouts and small graphics. The square aspect ratio suits dials, gauges and grid layouts.
Colour depth: 262K colours is enough for smooth shading and legible interface colour coding without the overhead of a full 16-million-colour panel.
Interfaces: the 4-wire SPI display bus is a common choice for microcontrollers because it is fast and uses fewer pins than parallel options. The I2C touch bus needs only two signal lines, so both functions can share a compact header.
Power: accepting 3.3V or 5V means the board can sit on either logic level, though you should confirm your host board's logic voltage before connecting.
Compatibility and Requirements
The module is listed as compatible with Raspberry Pi, ESP32-S3, Pico, Arduino and STM32 boards. You will need a host with SPI and I2C available, a suitable library or driver for the ST7789S and CST816D, and a power source within the 3.3V to 5V range. The included GH1.25 12-pin and 18-pin FFC cables handle the physical connection.
Typical Uses
- Handheld controllers and portable instruments needing a small touch screen
- Smart home wall panels and status displays
- Bench equipment readouts and sensor dashboards
- DIY electronics projects on Raspberry Pi, Pico, ESP32, Arduino or STM32
What's in the Box
- 1 x Waveshare 34370 1.54 inch Touch LCD Module
- 1 x GH1.25 12-pin cable
- 1 x FFC 18-pin 0.5 mm pitch cable, 200 mm, same direction




















