Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5 inch 800x480 resistive touchscreen made for Raspberry Pi, plugging straight into the board with no adapter. It runs Raspbian, Ubuntu, Kali and Retropie, and only touch input uses I/O pins, so the rest stay free.

Key Highlights

  • 5 inch resistive touchscreen with 800x480 hardware resolution
  • 170° viewing angle for readable output from most positions
  • Plugs directly into any Raspberry Pi version, no adapter needed
  • Display output uses no I/O resources; only touch occupies pins
  • V2 revision lowers power consumption with an improved backlight scheme
  • Backlight control support helps reduce power draw further

Ideal For

  • Raspberry Pi makers building compact dashboards and control panels
  • Retropie and retro gaming handheld or desktop builds
  • Robot and camera projects needing a small local screen
  • Students learning Raspberry Pi displays and touchscreen calibration
  • Home automation users mounting a panel display in a case

Buying Tip

Check whether your Raspberry Pi model needs the included HDMI cable or micro HDMI adapter, and plan to run the touchscreen calibration before mounting the screen in an enclosure.

Elecvora expert review

Our verdict

A tidy, purpose-built screen for Raspberry Pi projects that keeps the GPIO header mostly free and works with the major Pi operating systems. The V2 revision addresses power and mounting details that mattered on earlier versions.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct fit on Raspberry Pi boards with no adapter for most models
  • Display output leaves I/O pins free; only touch uses them
  • Driver support for Raspbian, Ubuntu, Kali and Retropie
  • V2 improvements to backlight power, screw locking and pin markings

Cons

  • Will not display anything when connected to a PC
  • Requires driver installation and touchscreen calibration
  • Resistive touch needs pressure rather than a light tap

Best for

Raspberry Pi makers who want a compact touchscreen that plugs straight onto the board

Not ideal for

Users wanting a plug-and-play monitor for a desktop PC or laptop

Specifications

Model No. / NameHDMI LCD Display
Touch TypeResistive
Display Size (Inch)5
Display Resolution (pixel)800 × 480
HDMI OutputYes
Viewing Angle (Deg.)170º
Length (mm)121
Width (mm)90
Weight (g)130
Shipping Weight0.152 kg
Shipping Dimensions13 × 10 × 3 cm

What's in the box

  • 1 x 5 inch HDMI LCD
  • 1 x HDMI connector
  • 1 x HDMI to micro HDMI connector
  • 1 x Touch pen
  • 1 x RPi screws pack (4 pcs)
  • 1 x Quick start sheet

Frequently Asked Questions

Does this display work with a normal PC?
No. It is designed for Raspberry Pi only, and connecting its HDMI port to a PC will not show a picture.
Which Raspberry Pi models can it connect to directly?
It can be inserted directly into any Raspberry Pi version except the Pi 1 Model B and Pi Zero, which require an HDMI cable.
Which operating systems are supported?
The supplied driver supports Raspbian, Ubuntu, Kali and Retropie.
Does the screen use up the GPIO pins?
Only the touch function occupies I/O resources. When used just for display, it does not take any I/O resources.
What is included with the display?
You get the 5 inch HDMI LCD, an HDMI connector, an HDMI to micro HDMI connector, a touch pen, a four-piece RPi screws pack and a quick start sheet.
How should I care for the resistive touch panel?
Use the included touch pen or a clean fingertip, avoid pressing with sharp objects, and keep the surface free of grit to prevent scratches.

Overview

The Waveshare 5 Inch Resistive HDMI LCD Display is a small-format screen designed around the Raspberry Pi. It pairs an 800x480 panel with a resistive touch layer and a 170° viewing angle, giving you a readable interface for menus, dashboards and controls without taking up much desk or enclosure space. At 121 mm long and 90 mm wide, it fits neatly onto a Pi and into compact builds.

Because the display is driven over HDMI, it does not consume any I/O resources when used purely for output. Only the touch function occupies pins, which leaves the rest of the header free for sensors, motors, buttons and other add-ons.

Key Features

  • 800x480 hardware resolution with a 170° viewing angle
  • Resistive touch control for stylus or finger input
  • Direct connection to any Raspberry Pi version
  • Driver support for Raspbian, Ubuntu, Kali and Retropie
  • Backlight control for lower power draw
  • V2 revision with improved backlight drive, screw locking and PCB pin markings

Specifications Explained

Resolution: 800x480 is enough for a clean desktop, terminal window, media player interface or retro game front end on a 5 inch screen. Text stays legible at normal viewing distance.

Resistive touch: Resistive panels respond to pressure, so they work with the included touch pen as well as a fingertip. This is practical for precise taps on small on-screen buttons.

Viewing angle: The 170° rating means the picture stays usable when you look at the screen from the side, which helps when the display is mounted flat in a panel or case.

Size and weight: The panel measures 121 x 90 mm and weighs about 130 g, so it adds very little bulk to a portable build.

Compatibility and Requirements

The display is intended for Raspberry Pi boards and can be inserted directly into any version. The Pi 1 Model B and Pi Zero need an HDMI cable instead of a direct fit, and the package includes both an HDMI connector and an HDMI to micro HDMI connector to cover this.

It is not designed for a PC. Connecting the HDMI port to a computer will not produce a picture. On Raspberry Pi, you will need to follow the software setting steps and calibrate the touchscreen before use.

Typical Uses

Common projects include retro gaming consoles running Retropie, compact desktop setups, home automation panels, camera and robot control screens, and portable terminals. The resistive touch layer and stylus make it a good match for menu-driven tools where precise selection matters.

What's in the Box

  • 1 x 5 inch HDMI LCD
  • 1 x HDMI connector
  • 1 x HDMI to micro HDMI connector
  • 1 x Touch pen
  • 1 x RPi screws pack (4 pcs)
  • 1 x Quick start sheet

Quick specs

Model No. / Name
HDMI LCD Display
Touch Type
Resistive
Display Size (Inch)
5
Display Resolution (pixel)
800 × 480
HDMI Output
Yes
Viewing Angle (Deg.)
170º
See all specifications

More from WAVESHARE

View all →

Related Products

View all →