
1 / 5 · Click to enlarge
At a glance
Made by WAVESHARE, this tft lcd displays is a good fit for makers, students and electronics hobbyists. Main specs: item type Display; display size (inch) 5; touchscreen (y/n) Yes.
Key Highlights
- Item Type: Display
- Display Size (Inch): 5
- Touchscreen (Y/N): Yes
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Display |
|---|---|
| Display Size (Inch) | 5 |
| Touchscreen (Y/N) | Yes |
| Input Power | 5V |
| Additional Specs. | CM4 Socket: suitable for all variants of Compute Module 4 |
| Networking | Gigabit Ethernet RJ45 connector |
| Supported | NVME SSD, M.2 M Key |
| PoE | PoE header (additional PoE HAT is required to enable PoE feature) |
| USB | USB 2.0 × 4 |
| Display | 5″ screen, 800 × 480 pixels, 5-point capacitive touch |
| Camera Details | MIPI, CSI-2 port × 2 (15pin 1.0mm FPC connector) |
| Video HDMI | Supports 4K 30fps output |
| RTC (Real Time Clock) | Real-time clock with a battery socket and ability to wake Compute Module 4 |
| Storage Capacity | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
| Fan header | Allows speed adjustment and measurement, 5V / 12V |
| Dimensions (L x W x H) mm | 127.7 × 87.45mm |
| Shipping Weight | 0.217 kg |
| Shipping Dimensions | 16 × 10 × 4 cm |
Overview
The Waveshare 5″ Touch Screen Expansion for Raspberry Pi CM4 PoE Header Gigabit Ethernet 4K Output, made by WAVESHARE, is listed in our tft lcd displays range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Display (measured diagonally; compare with the space you have before ordering)
- Display Size (Inch): 5 (measured diagonally; compare with the space you have before ordering)
- Touchscreen (Y/N): Yes
- Input Power: 5V
- Additional Specs.: CM4 Socket: suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45 connector (confirm your cable or board uses the same connector)
- Supported: NVME SSD, M.2 M Key (confirm your cable or board uses the same connector)
- PoE: PoE header (additional PoE HAT is required to enable PoE feature)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Note:
- Do not plug and unplug any device except USB and HDMI while the baseboard is working.
- If the fan needs to be replaced, please confirm the fan voltage and then power on.
- The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.
- In normal use, it is necessary to provide at least 5V 2.5A power supply for CM4. Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on.
- Onboard default 4-way USB 2.0 interface.
- Support POE pins, additional POE HAT is required if POE function is required.
- This screen needs to add a driver to work.
Useful Link:
https://www.waveshare.com/wiki/CM4-DISP-BASE-5APackages Includes:
1 x Waveshare 5″ Touch Screen Expansion for Raspberry Pi CM4Quick specs
- Item Type
- Display
- Display Size (Inch)
- 5
- Touchscreen (Y/N)
- Yes
- Input Power
- 5V
- Additional Specs.
- CM4 Socket: suitable for all variants of Compute Module 4
- Networking
- Gigabit Ethernet RJ45 connector


















