Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 7-inch 1024 x 600 RGB TFT LCD module with a capacitive touch panel and GT911 5-point touch controller. It gives embedded builds a readable colour display with responsive multi-touch over a single 40-pin FFC connection.

Key Highlights

  • 7-inch TFT panel with 1024 x 600 pixel resolution
  • Capacitive touch layer supporting 5-point multi-touch
  • GT911 stand-alone touch controller on board
  • RGB interface with 40-pin FFC connection
  • LED backlight for consistent panel illumination
  • Runs from a 3.0 to 3.6 V input supply

Ideal For

  • Embedded developers building touch control panels
  • Makers integrating a mid-size display into an enclosure
  • Instrumentation projects needing a 1024 x 600 readout
  • Open746I users adding a capacitive touch screen
  • Integrators building kiosk or menu-driven interfaces

Buying Tip

Confirm your host board exposes an RGB display interface and a matching 40-pin FFC connector, and check the FFC contact orientation before first power-up.

Elecvora expert review

Our verdict

A tidy, well-integrated 7-inch module that combines a 1024 x 600 TFT panel with capacitive multi-touch and a dedicated GT911 controller. It is a sensible choice when you want a readable wide-format screen without assembling the panel, backlight and touch layer yourself.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 1024 x 600 resolution suits data-rich interfaces
  • Capacitive 5-point touch with dedicated GT911 controller
  • Panel, driver ICs, FPC and backlight supplied as one unit
  • Compact 165 x 125 mm footprint for enclosure builds

Cons

  • Requires a host with an RGB display interface
  • Narrow 3.0 to 3.6 V supply range must be respected
  • No HDMI or USB input, so it is not a plug-and-play monitor

Best for

Embedded developers and makers adding a capacitive touch display to a custom build

Not ideal for

Users wanting a plug-and-play desktop monitor over HDMI or USB

Specifications

Model No. / NameLCD Display
Touch TypeCapacitive
Display Size (Inch)7
Display Resolution (pixel)1024 × 600
Display BacklightLED
Input Voltage (V)3.0 ~ 3.6V
Interface TypeRGB
Panel TypeTFT
Touch ControllerGT911
Touch PanelCapacitive (5 multi-touch)
Dot Pitch0.0502 (W) × 0.1432 (H)
Length (mm)125
Width (mm)165
Shipping Weight0.197 kg
Shipping Dimensions18 × 14 × 3 cm

What's in the box

  • 1 x 7-inch Capacitive Touch LCD (F)
  • 1 x 40-pin FFC (opposite sides contact)

Frequently Asked Questions

What resolution does this display support?
The panel has an active area of 1024 x 600 pixels in a wide format, which suits dashboards, menus and data readouts.
How many touch points does it support?
The capacitive touch panel supports 5-point multi-touch, handled by the on-board GT911 touch controller.
What input voltage does the module need?
The module is specified for a 3.0 to 3.6 V input supply. Check your host board's rail before connecting it.
What interface does it use?
It uses an RGB interface and connects through a 40-pin FFC. The included cable has contacts on opposite sides.
Is it compatible with my board?
The product data lists compatibility with Open746I. For other boards, confirm an RGB display interface and a matching 40-pin FFC connector are available.
How should I handle and store the module?
Keep the panel face protected from pressure and scratches, avoid flexing the FFC sharply, and store it in a dry place away from static-prone surfaces.

Overview

The Waveshare 7 Inch Capacitive Touch LCD Display (F) is a complete 7-inch display assembly built around a colour-active matrix TFT panel. The module brings together the LCD panel, driver ICs, a flexible printed circuit and an LED backlight unit in a single part, so you do not have to source and align those pieces separately. The active area measures 1024 x 600 pixels, and the front is covered by a capacitive touch panel driven by a GT911 controller that reports up to five simultaneous touch points.

Because the touch controller is stand-alone, touch sensing is handled on the module rather than by the host board, which keeps integration simpler. The panel connects through an RGB interface using a 40-pin FFC, and the module is specified for a 3.0 to 3.6 V input supply.

Key Features

  • 1024 x 600 resolution: a wide-format panel with enough detail for dashboards, menus and data readouts.
  • Capacitive 5-point touch: supports multi-touch gestures and precise single-finger selection.
  • GT911 touch controller: a dedicated controller IC handles touch reporting.
  • LED backlight: provides even illumination across the display area.
  • RGB interface: a parallel RGB connection suited to embedded display pipelines.
  • Compact footprint: 165 mm wide and 125 mm long, with a 0.0502 x 0.1432 mm dot pitch.

Specifications Explained

The 1024 x 600 pixel count defines how much content fits on screen. It is a 16:9-style wide format, so horizontal layouts such as status bars, graphs and side-by-side controls work naturally. The dot pitch of 0.0502 mm horizontally and 0.1432 mm vertically describes the spacing of individual dots, which is useful when you are planning text sizes and touch target spacing in your interface.

The RGB interface means the host sends pixel data over parallel colour lines rather than a serial link, which is common on embedded display controllers. The 3.0 to 3.6 V input range is a logic-level supply specification, so check your carrier board's rail before connecting. The GT911 controller and capacitive layer handle touch independently of the display data path.

Compatibility and Requirements

The display is listed as compatible with Open746I. Beyond that, plan for a host that provides an RGB display interface and a 40-pin FFC connection, plus a regulated supply within the 3.0 to 3.6 V range. The included 40-pin FFC has contacts on opposite sides, so confirm the orientation matches your board's connector before powering up.

Typical Uses

This module fits embedded control panels, instrument readouts, home automation interfaces, kiosk-style terminals and maker projects that need a mid-size touch screen. The capacitive layer makes it a good match for menu-driven interfaces where tapping and swiping are the main input.

What's in the Box

  • 1 x 7-inch Capacitive Touch LCD (F)
  • 1 x 40-pin FFC with opposite-side contacts

Quick specs

Model No. / Name
LCD Display
Touch Type
Capacitive
Display Size (Inch)
7
Display Resolution (pixel)
1024 × 600
Display Backlight
LED
Input Voltage (V)
3.0 ~ 3.6V
See all specifications

More from WAVESHARE

View all →

Related Products

View all →