Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 240x320 IPS capacitive touch display module with ST7789T3 display driver and CST816D touch controller. Its SPI display and I2C touch interfaces minimise IO pin usage while the onboard translator supports 3.3V or 5V hosts.

Key Highlights

  • 240x320 IPS panel with 262K colours for clear, colourful visuals
  • ST7789T3 display driver over 4-wire SPI for fast refresh
  • CST816D capacitive touch controller with I2C interface
  • Onboard voltage translator for 3.3V or 5V operation
  • 15-pin connector and 18-pin FPC slot for host board connection
  • Online development resources for Raspberry Pi, ESP32, Pico and Arduino

Ideal For

  • Makers building touch interfaces for Raspberry Pi or ESP32 projects
  • Students learning embedded graphics and capacitive touch
  • Engineers prototyping compact control panels
  • Arduino and Raspberry Pi Pico users adding a small touchscreen
  • IoT developers needing a low-pin-count display solution

Buying Tip

Confirm that your host board has a free SPI bus for the display and an I2C bus for touch, and check that you have the correct 15-pin or 18-pin FPC connection for your wiring plan.

Elecvora expert review

Our verdict

A well-integrated touch display module that simplifies adding a capacitive interface to common microcontroller platforms. The dual-controller design and voltage translator make it flexible, though the small screen size limits how much information you can show at once.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated capacitive touch with dedicated controller
  • Supports both 3.3V and 5V logic via onboard translator
  • Low pin count thanks to SPI display and I2C touch
  • IPS panel offers good colour and viewing angles
  • Development resources available for popular boards

Cons

  • Small 240x320 resolution may be limiting for complex UIs
  • Requires separate host board and wiring; no cables listed
  • Touch and display use different buses, so both must be available

Best for

Makers and engineers adding a compact touch interface to Raspberry Pi, ESP32, Pico or Arduino projects

Not ideal for

Projects requiring a large screen or high-resolution graphics

Specifications

Item TypeCapacitive Touch Display Module
Operating Voltage3.3V / 5V
Display DriverST7789T3
Display Interfaces4-wire SPI
Display PanelIPS
Pixel Pitch0.1275 × 0.1275 (mm)
Display Size (Inch)30.6 × 40.8 (mm)
Resolution240 × 320 pixels
Module Size37.1 × 58.8 (mm)
Shipping Weight0.04 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x Waveshare Capacitive Touch Display Module with ST7789T3 Display Driver and CST816D Capacitive Touch Controller

Frequently Asked Questions

What is the resolution of the display?
The display has a resolution of 240 x 320 pixels and supports 262K colours on an IPS panel.
Which controllers are used on this module?
The module uses the ST7789T3 display driver for the screen and the CST816D capacitive touch controller for touch input.
What interfaces does the module use?
The display communicates over 4-wire SPI, while the touch controller uses I2C. This separation helps minimise the number of IO pins required.
What operating voltage does the module support?
The module supports 3.3V or 5V operation thanks to an onboard voltage translator, making it compatible with a range of host boards.
What is included in the package?
The package contains one Waveshare Capacitive Touch Display Module with the ST7789T3 driver and CST816D touch controller. No other accessories are listed.
Where can I find example code?
Online development resources and a manual are available, with examples for Raspberry Pi, ESP32, Raspberry Pi Pico and Arduino.

Overview

The Waveshare Capacitive Touch Display Module is a compact display and input solution for embedded projects. It pairs a 240x320 pixel IPS panel with a capacitive touch overlay, using the ST7789T3 display driver and the CST816D touch controller. The IPS panel delivers consistent colour and viewing angles, while the capacitive touch layer provides a responsive interface without the wear associated with resistive touchscreens.

Key Features

  • Dual-controller design: ST7789T3 handles display output over 4-wire SPI; CST816D manages touch input over I2C.
  • Low pin count: Separating display and touch onto SPI and I2C buses keeps the required IO pins to a minimum.
  • Flexible power: An onboard voltage translator makes the module compatible with both 3.3V and 5V host boards.
  • Practical connections: A 15-pin connector and an 18-pin FPC slot are provided for linking the LCD module to the host board.
  • Development support: Online resources and a manual include examples for Raspberry Pi, ESP32, Raspberry Pi Pico and Arduino.

Specifications Explained

The 240x320 resolution is a common portrait-oriented format that suits text, icons and simple graphics. The IPS panel type helps maintain colour accuracy when viewed from an angle. Pixel pitch of 0.1275 x 0.1275 mm and a display area of 30.6 x 40.8 mm describe a small, dense screen suitable for handheld or panel-mounted devices. The module itself measures 37.1 x 58.8 mm, leaving room for mounting and connectors. The 4-wire SPI interface is widely supported by microcontrollers, and the I2C touch interface uses only two signal lines. Operating voltage is specified as 3.3V or 5V, and the onboard translator handles level shifting so the module can work with either logic level.

Compatibility and Requirements

The module is designed for host boards that support 4-wire SPI and I2C. It is compatible with 3.3V and 5V logic levels thanks to the onboard voltage translator. Example code and a manual are available online for Raspberry Pi, ESP32, Raspberry Pi Pico and Arduino platforms. A 15-pin connector and an 18-pin FPC slot are used to connect the LCD module to the host board. No additional components are listed as required beyond a compatible host and the appropriate cable or connector for your setup.

Typical Uses

  • Status and control panels for microcontroller projects
  • Handheld instrument displays with touch input
  • Home automation and IoT device interfaces
  • Educational projects and prototyping
  • Custom user interfaces for Raspberry Pi, ESP32, Pico or Arduino

What's in the Box

1 x Waveshare Capacitive Touch Display Module with ST7789T3 display driver and CST816D capacitive touch controller.

2inch Capacitive Touch LCD display, pin description

Quick specs

Item Type
Capacitive Touch Display Module
Operating Voltage
3.3V / 5V
Display Driver
ST7789T3
Display Interfaces
4-wire SPI
Display Panel
IPS
Pixel Pitch
0.1275 × 0.1275 (mm)
See all specifications

More from WAVESHARE

View all →

Related Products

View all →