
1 / 4 · Click to enlarge
At a glance
Made by WAVESHARE, this tft lcd displays is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.15 kg.
Key Highlights
- Shipping Weight: 0.15 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.15 kg |
|---|---|
| Shipping Dimensions | 9 × 7 × 3 cm |
Overview
The Waveshare ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Accelerometer And Gyroscope Sensor, Round Display, With CNC Metal Case, made by WAVESHARE, is listed in our tft lcd displays range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.15 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 7 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (BLE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
- Adopts CNC metal case with Acrylic dull-polish bottom plate
- Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
- Onboard 3.7V MX1.25 lithium battery recharge/discharge header
- Adapting 6 × GPIO pins via SH1.0 connector
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
Specifications:
- Processor: Xtensa® 32-bit LX7 dual-core
- Frequency: up to 240MHz
- Wi-Fi: Supports 2.4GHz
- SRAM: 512KB
- ROM: 384KB
- PSRAM: 2MB
- Flash memory: 16MB
- Connector: Type-C
- Display: 1.28inch
- Touch display: Capacitive
- Resolution: 240×240
- 6 × GPIO pins
Package Includes:
1 x ESP32-S3-Touch-LCD-1.28
1 x SH1.0 12PIN cable
1 x Screwdriver


















