
1 / 3 · Click to enlarge
AI Summary
A compact ESP32-S3 board with a built-in 1.28-inch round IPS LCD and GC9A01 driver, plus Wi-Fi, Bluetooth 5 and a six-axis IMU. It lets you build connected, screen-based projects without wiring a separate display module.
Key Highlights
- Dual-core 32-bit LX7 processor running at up to 240MHz
- 1.28-inch round IPS LCD, 240x240 resolution, 65K colour
- Onboard GC9A01 display driver chip for direct panel control
- 2.4GHz Wi-Fi and Bluetooth 5 with onboard antenna
- 2MB PSRAM and 16MB external Flash onboard
- QMI8658 six-axis IMU for motion and gesture detection
Ideal For
- Makers building screen-based IoT and smart home devices
- Firmware developers prototyping wearable interfaces
- Electronics students learning ESP32-S3 and display driving
- Product designers testing compact round-display concepts
- Hobbyists adding motion sensing to portable gadgets
Buying Tip
Confirm your project can work with the board's 3.7V lithium battery input and that you have a USB-C data cable for programming before ordering.
Elecvora expert review
Our verdict
This is a well-integrated ESP32-S3 board that removes the fiddly work of wiring a round display and IMU, making it a practical starting point for screen-driven IoT projects. It rewards buyers who want a compact, ready-to-program platform rather than a bare module.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Round IPS LCD and GC9A01 driver already integrated
- Wi-Fi, Bluetooth 5, PSRAM and 16MB Flash onboard
- Six-axis IMU adds motion sensing without extra parts
- USB-C and 3.7V lithium battery header simplify power
Cons
- Requires a separate 3.7V lithium battery for portable use
- Limited documentation beyond the manufacturer tutorial
- GPIO access is restricted by the compact board layout
Best for
Makers and developers building compact connected devices with a visible round interface
Not ideal for
Projects needing a large screen or extensive external expansion space
Specifications
| Display | 1.28-inch LCD display |
|---|---|
| Connectivity | Wi-Fi, Bluetooth 5.0 |
| Input Power (W) | 3.7V |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 1 x Waveshare ESP32-S3 Development Board with 1.28-inch IPS Round LCD
Frequently Asked Questions
What processor does this board use?
Does the board include the display?
How is the board powered?
What memory is available?
Does it have wireless connectivity?
What sensors are included?
Overview
The Waveshare ESP32-S3 development board packs a complete microcontroller, a round colour display and motion sensing onto a single compact PCB. At its centre is the ESP32-S3R2 system-on-chip with a 32-bit LX7 dual-core processor reaching up to 240MHz, paired with 512KB SRAM, 384KB ROM, 2MB PSRAM and 16MB of external Flash. A 1.28-inch IPS round LCD with 240x240 resolution and 65K colour is driven by an onboard GC9A01 controller, so the screen is ready to use without extra wiring.
Key Features
- Xtensa 32-bit LX7 dual-core processor at up to 240MHz
- 1.28-inch round IPS LCD, 240x240 pixels, 65K colour
- Integrated GC9A01 display driver chip
- 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE) with onboard antenna
- QMI8658 six-axis IMU: 3-axis accelerometer and 3-axis gyroscope
- USB Type-C connector for programming and power
- 3.7V lithium battery recharge/discharge header and GPIO headers
- Hardware encryption accelerators, RNG, HMAC and digital signature module
Specifications Explained
The dual-core LX7 at 240MHz gives headroom for graphics updates, wireless stacks and sensor processing at the same time. The 2MB PSRAM is useful for frame buffers and larger data structures, while 16MB Flash leaves room for firmware, assets and stored data. The round 240x240 IPS panel offers wide viewing angles and consistent colour, which matters for gauges, dials and wearable-style interfaces. Wi-Fi and Bluetooth 5 are handled by the SoC with an onboard antenna, so no external radio hardware is needed. The QMI8658 IMU adds tilt, orientation and motion input, and the 3.7V lithium battery header supports rechargeable battery power for portable builds.
Compatibility and Requirements
The board is programmed through its USB Type-C connector and exposes GPIO headers for adding peripherals. It accepts a 3.7V lithium battery through the dedicated recharge/discharge header. A computer with a USB port is required for programming, and a suitable 3.7V lithium battery is needed for untethered operation. Refer to the manufacturer tutorial for pinout and library details.
Typical Uses
Typical applications include IoT status displays, smart home control panels, wearable electronics, portable sensor readers, motion-aware gadgets and interactive prototypes that need a small round screen.
What's in the Box
One Waveshare ESP32-S3 development board with the 1.28-inch IPS round LCD already fitted.
Quick specs
- Display
- 1.28-inch LCD display
- Connectivity
- Wi-Fi, Bluetooth 5.0
- Input Power (W)
- 3.7V
- Shipping Weight
- 0.025 kg
- Shipping Dimensions
- 8 × 6 × 4 cm


















