Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Raspberry Pi HAT combining a 2-inch 240x320 IPS LCD with two 0.96-inch blue OLED status screens on one 40-pin GPIO board. It gives you a colour main display plus compact secondary readouts, with four onboard user keys for input.

Key Highlights

  • 2-inch IPS main screen at 240 x 320 with 262K colour
  • Dual 0.96-inch blue OLED secondary panels at 128 x 64
  • SPI main display driven by ST7789VW; I2C OLEDs use SSD1315
  • Standard 40-pin GPIO header for Raspberry Pi series boards
  • Four onboard user-defined keys for custom controls
  • Compact board weighing about 38 g

Ideal For

  • Raspberry Pi makers building compact status dashboards
  • Electronics students learning SPI and I2C displays
  • Home server and network monitoring hobbyists
  • Sensor and weather station builders
  • Developers prototyping multi-screen control panels

Buying Tip

Check that your enclosure leaves room for the two OLED panels and the four side keys before mounting the HAT on your Pi.

Elecvora expert review

Our verdict

A practical three-screen HAT that saves wiring and keeps a colour display and two status panels on one board. It is aimed at makers who are comfortable installing drivers and writing display code.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three displays on a single GPIO-mounted board
  • Clear separation of colour main screen and compact OLED status panels
  • Four onboard keys reduce extra wiring
  • Standard 40-pin header fits Raspberry Pi series boards

Cons

  • OLED panels are monochrome blue only
  • Requires driver and library setup before use
  • No enclosure or mounting hardware included

Best for

Raspberry Pi users who want a colour dashboard plus small status readouts in one module

Not ideal for

Buyers wanting a plug-and-play screen with no software configuration

Specifications

Display Size (Inch)2
Display Resolution (pixel)240 × 320
Display Color262k color
Communication ModeSPI
Driverst7789vw
Shipping Weight0.038 kg
Shipping Dimensions9 × 8 × 3 cm

What's in the box

  • 1 x Waveshare Raspberry Pi OLED/LCD HAT with 2-inch IPS LCD and dual 0.96-inch blue OLED screens

Frequently Asked Questions

What displays does this HAT include?
It has a 2-inch IPS LCD at 240 x 320 with 262K colour, plus two 0.96-inch blue OLED screens at 128 x 64 resolution.
Which interfaces are used?
The main LCD uses SPI with the ST7789VW driver, and the two OLED panels use I2C with the SSD1315 driver.
Which boards is it compatible with?
It uses a standard Raspberry Pi 40-pin GPIO header and is listed for Raspberry Pi series boards. The provided resources also cover VisionFive2, Arduino and STM32.
Are the buttons programmable?
Yes, the four onboard keys are user-defined and can be assigned functions in your own code.
What is included in the package?
The package contains one Waveshare Raspberry Pi OLED/LCD HAT with the 2-inch IPS LCD and dual 0.96-inch blue OLED screens.
Do I need to install software?
Yes. You will need to enable SPI and I2C and install the appropriate drivers and libraries using the supplied online resources and manual.

Overview

The Waveshare Raspberry Pi OLED/LCD HAT is a display board that mounts directly on a Raspberry Pi 40-pin GPIO header. Instead of adding one screen, it combines three: a 2-inch IPS LCD as the main display and two 0.96-inch blue OLED panels as secondary readouts. The result is a single tidy board for projects that need a colour interface plus small always-on status information.

Key Features

  • Main IPS display: 2-inch panel at 240 x 320 resolution with 262K colour and a wide viewing angle, driven by the ST7789VW chip over SPI.
  • Dual OLED secondaries: two 0.96-inch blue OLED screens at 128 x 64 resolution, each using the SSD1315 driver over I2C.
  • Onboard keys: four user-defined buttons let you add navigation or commands without external wiring.
  • Direct mounting: the 40-pin GPIO header connects the board to Raspberry Pi series boards.
  • Development support: online resources and a manual are provided for Raspberry Pi, VisionFive2, Arduino and STM32 use.

Specifications Explained

The 240 x 320 resolution on the 2-inch panel is enough for menus, graphs, sensor dashboards and short text blocks, while 262K colour keeps images and charts readable. SPI is a fast, simple bus that leaves other pins free for your project. The two OLEDs are smaller and monochrome blue, which makes them well suited to fixed labels such as IP address, temperature, uptime or connection state. Their I2C interface shares a two-wire bus, so both can run alongside the main screen without extra complexity. At roughly 38 g, the board adds little weight to a build.

Compatibility and Requirements

The board uses a standard Raspberry Pi 40-pin GPIO header and is listed as compatible with Raspberry Pi series boards. The supplied development resources also cover VisionFive2, Arduino and STM32 platforms. You will need a host board, a microSD card or equivalent development environment, and the appropriate libraries and drivers for the ST7789VW and SSD1315 chips. Plan your enclosure so the OLED panels and the four keys remain accessible.

Typical Uses

  • Desktop dashboards showing system status on the LCD with key metrics on the OLEDs
  • Sensor and weather stations with a colour graph plus two compact readouts
  • Media or network status panels for a home server
  • Learning projects that demonstrate SPI and I2C displays together

What's in the Box

One Waveshare Raspberry Pi OLED/LCD HAT with the 2-inch IPS LCD and dual 0.96-inch blue OLED screens.

Quick specs

Display Size (Inch)
2
Display Resolution (pixel)
240 × 320
Display Color
262k color
Communication Mode
SPI
Driver
st7789vw
Shipping Weight
0.038 kg
See all specifications

More from WAVESHARE

View all →

Related Products

View all →