
1 / 3 · Click to enlarge
AI Summary
A Pico 2 style board built on the dual-core RP2350 with a 0.85 inch 128x128 65K color IPS screen onboard. It puts a readable display, 16MB Flash and a 6-axis IMU into one tiny board for portable projects.
Key Highlights
- Dual Arm Cortex-M33 and Hazard3 RISC-V cores up to 150MHz
- 0.85 inch IPS LCD, 128x128 pixels, 65K colors, ST7735 driver
- 16MB onboard Flash and 520KB SRAM for code and assets
- 6-axis IMU, temperature sensor and TF card slot included
- USB Type-C with drag-and-drop programming plus I2C, UART, ADC and PWM
- Compact 46 x 46 x 22.50 mm board weighing 28 g
Ideal For
- Makers building wearable displays and pocket gadgets
- Embedded developers prototyping small-screen user interfaces
- Students learning RP2350 and dual-architecture programming
- IoT builders needing a local readout and motion sensing
- Hobbyists creating handheld instruments and data loggers
Buying Tip
Confirm your project needs the onboard 128x128 screen rather than a bare Pico 2, since the display adds size and cost you cannot remove later.
Elecvora expert review
Our verdict
A neatly integrated board that saves wiring a screen to a microcontroller, with the RP2350's dual architecture adding flexibility for different toolchains. It is a sensible pick when a small colour display is central to the design.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Display, IMU, temperature sensor and TF slot already onboard
- Dual Arm and RISC-V cores with up to 150MHz clock
- 16MB Flash gives generous room for graphics and logs
- USB Type-C with drag-and-drop programming
Cons
- 128x128 resolution limits how much text fits on screen
- No battery or charging circuit included
- 3.3V logic requires care with 5V peripherals
Best for
Compact display-driven projects such as wearables and handheld instruments
Not ideal for
Projects needing a large screen or high-resolution graphics
Specifications
| Shipping Weight | 0.041 kg |
|---|---|
| Shipping Dimensions | 8 × 7 × 3 cm |
What's in the box
- 1 x Waveshare RP2350-LCD-0.85-EN board
- 1 x PC insulating sheet
Frequently Asked Questions
What microcontroller does this board use?
How do I program the board?
What voltage does the board need?
Is a memory card included?
What is in the box?
Does the screen need extra wiring?
Overview
The Waveshare RP2350-LCD-0.85-EN brings a display straight onto the board. Instead of wiring a screen to a separate microcontroller, you get the RP2350 chip and a 0.85 inch IPS LCD in one compact unit measuring 46 x 46 x 22.50 mm and weighing 28 g. That makes it a practical starting point for handheld and wearable designs where space is tight but visual feedback still matters.
The RP2350 uses a dual-architecture design: two Arm Cortex-M33 cores and two Hazard3 RISC-V cores, with flexible clock speeds up to 150MHz. You choose the architecture that fits your toolchain. With 16MB Flash and 520KB SRAM, there is room for firmware, graphics assets and data logging without external memory.
Key Features
- 0.85 inch IPS LCD at 128 x 128 pixels with 65K colors and an ST7735 driver, giving crisp output in a very small footprint.
- RP2350 dual-architecture MCU with Arm Cortex-M33 and Hazard3 RISC-V cores up to 150MHz.
- 16MB Flash and 520KB SRAM for programs, images and buffered sensor data.
- 6-axis IMU and temperature sensor onboard for motion and environment sensing.
- TF card slot for removable storage of logs, images or configuration files.
- USB Type-C supporting USB 1.1 device and host modes, with drag-and-drop programming.
Specifications Explained
The 128 x 128 resolution suits icons, gauges, menus and short text rather than full interfaces. Because the panel is IPS, colours stay consistent when viewed from an angle, which helps on a wrist-mounted or handheld device. The 15.21 x 15.21 mm active area keeps the display compact while remaining readable at close range.
Twelve programmable I/O state machines give you flexible timing control for peripherals. The board exposes SPI in 4-wire mode for the display, plus I2C, UART, 2 x 12-bit ADC channels and 2 PWM channels for sensors, motor drivers and audio buzzers. Operating voltage is 3.3V or 5V, and the LED backlight is driven separately.
Compatibility and Requirements
The board works with the RP2350 ecosystem and supports USB 1.1 device and host operation over Type-C. Programming can be done by drag-and-drop over USB, so no separate programmer is needed. You will need a USB Type-C cable and a host computer. A TF card is optional and not included. Because the board runs at 3.3V logic, check that external modules match that level or use suitable level shifting.
Typical Uses
Good fits include wearable status displays, pocket-sized sensor readers, portable game or badge projects, bench instruments with a small readout, and IoT nodes that need a local screen. The IMU and temperature sensor make it useful for motion-aware gadgets, while the TF slot supports data logging in the field.
What's in the Box
- 1 x Waveshare RP2350-LCD-0.85-EN board
- 1 x PC insulating sheet




















