
1 / 2 · Click to enlarge
At a glance
Made by Adafruit, this arm microcontrollers ic is a good fit for everyday home and hobby use. Main specs: manufacturer Adafruit; processor RP2040 32-bit Cortex M0+ dual-core running at ~133 MHz; control voltage 3.3V logic and power. Check that your power source supplies 3.3V logic and power before connecting it.
Key Highlights
- Manufacturer: Adafruit
- Processor: RP2040 32-bit Cortex M0+ dual-core running at ~133 MHz
- Control Voltage: 3.3V logic and power
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | Adafruit |
|---|---|
| Processor | RP2040 32-bit Cortex M0+ dual-core running at ~133 MHz |
| Control Voltage | 3.3V logic and power |
| Memory Capacity | 264 KB RAM |
| Flash | 8 MB SPI FLASH chip |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT / Qwiic, made by Adafruit, is listed in our arm microcontrollers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Adafruit
- Processor: RP2040 32-bit Cortex M0+ dual-core running at ~133 MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Control Voltage: 3.3V logic and power (match this to your power supply; too high a voltage can damage the part)
- Memory Capacity: 264 KB RAM (more memory leaves room for larger programs and buffers)
- Flash: 8 MB SPI FLASH chip (space for firmware, files or media)
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Light as a (large?) feather - 6.3 grams
- RP2040 32-bit Cortex M0+ dual core running at ~133 MHz @ 3.3V logic and power
- 264 KB RAM
- 8 MB SPI FLASH chip for storing files and CircuitPython/MicroPython code storage. No EEPROM
- Tons of GPIO! 21 x GPIO pins with following capabilities:
-
- Four 12-bit ADCs (one more than Pico)
- Two I2C, Two SPI, and two UART peripherals, we label one for the 'main' interface in standard Feather locations
- 16 x PWM outputs - for servos, LEDs, etc
- Built-in 200mA+ lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- RGB NeoPixel for full-color indication.
- MicroSD card holder for adding as much storage as you could possibly want for reading
Package Includes:
1 x Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT / QwiicQuick specs
- Manufacturer
- Adafruit
- Processor
- RP2040 32-bit Cortex M0+ dual-core running at ~133 MHz
- Control Voltage
- 3.3V logic and power
- Memory Capacity
- 264 KB RAM
- Flash
- 8 MB SPI FLASH chip
- Shipping Weight
- 0.001 kg



















