Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this arm microcontrollers ic is a good fit for everyday home and hobby use. Main specs: item type Development Board; model no. / name RP2350; processor Dual ARM Cortex-M33.

Key Highlights

  • Item Type: Development Board
  • Model No. / Name: RP2350
  • Processor: Dual ARM Cortex-M33

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
RAM520 KB
Model No. / NameRP2350
Clock Speed150 MHz
ProcessorDual ARM Cortex-M33
Shipping Weight0.005 kg
Shipping Dimensions7 × 3 × 2 cm

Overview

The Adafruit Feather RP2350 with HSTX Port, made by Adafruit, is listed in our arm microcontrollers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • RAM: 520 KB (more memory leaves room for larger programs and buffers)
  • Model No. / Name: RP2350
  • Clock Speed: 150 MHz (make sure the rest of your system works at this frequency)
  • Processor: Dual ARM Cortex-M33 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 3 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The RP2350 Feather is a powerful, battery-powered dev board in the Feather format, compatible with FeatherWings. It features 8MB of flash, a 22-pin HSTX output, Stemma QT, debug SWD, and an optional PSRAM spot. Powered by the RP2350 chip with dual M33 cores running at 150 MHz, it offers faster performance, hardware floating point, and 520KB of SRAM for more memory. It includes three PIO blocks, TrustZone secure boot, and the HSTX port for high-speed data transmission. Ideal for IoT, CircuitPython, and MicroPython projects.

Features:

  1. Dual ARM Cortex-M33 @ 150MHz with floating point unit
  2. 520KB SRAM and 8KB OTP memory
  3. Supports up to 16MB external Flash via QSPI
  4. External QSPI PSRAM support
  5. 16-channel DMA controller, AHB crossbar
  6. On-chip power supply and LDO regulator
  7. Dual PLLs for 48MHz USB and 150MHz core clocks
  8. Boot signing with protected OTP storage
  9. Hardware SHA-256 and TRNG
  10. 30 GPIO pins, 4 for analog input
  11. Peripherals: 2 UARTs, 2 SPIs, 2 I2C controllers
  12. 24 PWM channels, USB 1.1 with host and device support
  13. 12 PIO state machines

Specifications:
  1. Dimensions: Measures 2.0" x 0.9" x 0.28" (50.8mm x 22.8mm x 7mm) without headers; weighs 5 grams.
  2. Processor: RP2350 dual-core 32-bit Cortex M33 at 150 MHz, operating at 3.3V logic.
  3. Memory: 520 KB RAM and 8 KB OTP, with an 8 MB SPI flash for code storage; optional SOIC PSRAM support.
  4. GPIO: 29 GPIO pins (21 on the Feather header and 8 on the HSTX connector), plus 4 12-bit ADCs, 24 PWM outputs, and multiple peripherals (2 I2C, 2 SPI, 2 UART).
  5. Additional Features: Built-in 200mA LiPo charger, RGB NeoPixel, STEMMA QT connector, reset/bootloader buttons, 12 MHz crystal, USB Type C for bootloader access, and 4 mounting holes.
 

Package Includes:

1 x Adafruit Feather RP2350 with HSTX Port

Quick specs

Item Type
Development Board
RAM
520 KB
Model No. / Name
RP2350
Clock Speed
150 MHz
Processor
Dual ARM Cortex-M33
Shipping Weight
0.005 kg
See all specifications