
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: particle counting efficiency 50%@0.3μm, 98%@>=0.5μm; measurement range 0~99℃; humidity range 0~99%. Check that your power source supplies Typ: 5V Min: 4.5V Max: 5.5V before connecting it.
Key Highlights
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
- Measurement Range: 0~99℃
- Humidity Range: 0~99%
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Particle Counting Efficiency | 50%@0.3μm, 98%@>=0.5μm |
|---|---|
| Measurement Range | 0~99℃ |
| Humidity Range | 0~99% |
| Response Time(s) | <1s (single) |
| Supply Voltage | Typ: 5V Min: 4.5V Max: 5.5V |
| Working Current (mA) | ≤100mA |
| Standby current(mA) | ≤200mA |
| Data Interface | L<0.8V, H>2.7V, maximum level voltage 3.3V |
| Operating Temperature (°C) | 10~50℃ |
| Operating humidity | 0~99% |
| Storage Temperature (°C) | 40~80℃ |
| Shipping Weight | 0.044 kg |
| Shipping Dimensions | 12 × 8 × 3 cm |
Overview
The DFRobot Air Quality Monitor PM2.5 HCHO Temp Humidity, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
- Measurement Range: 0~99℃ (quoted range is usually line-of-sight; walls and interference shorten it)
- Humidity Range: 0~99% (quoted range is usually line-of-sight; walls and interference shorten it)
- Response Time(s): <1s (single)
- Supply Voltage: Typ: 5V Min: 4.5V Max: 5.5V (match this to your power supply; too high a voltage can damage the part)
- Working Current (mA): ≤100mA (your supply must deliver at least this much current)
- Standby current(mA): ≤200mA (your supply must deliver at least this much current)
- Data Interface: L<0.8V, H>2.7V, maximum level voltage 3.3V (match this to your power supply; too high a voltage can damage the part)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Healthy living starts with healthy air! As the most basic part of life, air is attracting more and more attention these years, for example, PM2.5, smog, etc. Keeping an eye on the quality of the air we breathe is becoming quite important. This Air Quality Monitor introduced by DFRobot provides you with the measurements of PM10, PM2.5, and PM1.0 as well as temperature and humidity. It works well with devices like Arduino, STM32.Based on the principle of laser scattering, this sensor continuously collects and calculates the number of suspended particles of various sizes in the air per unit volume, which is particle concentration distribution, and then converts to mass concentration. At the same time, a temperature & humidity integrated sensing chip is embedded in the module for accurately detecting the temperature and humidity. In a word, this air quality sensor combines the particle concentration value, temperature, and humidity monitoring functions onto one module, and outputs the relevant data frames via UART. It can be embedded in various instruments and equipment related to air quality monitoring and environmental air improvement to provide timely and accurate environmental parameters.
Connection Diagram:
Useful Link:
https://wiki.dfrobot.com/Air_Quality_Monitor__PM_2.5_Temperature_and_Humidity_Sensor__SKU__SEN0233
Features:
- Laser scattering principle, accurate measurement
- Zero false alarm rate
- Real-time response and support continuous acquisition
- Minimum recognizable particle size 0.3μm
- Brand-new patented structure, six-sided all-around shielding, stronger anti-interference performance
- The direction of the air inlet and outlet is optional, and wider application ranges
- Real-time output temperature and humidity data
Package Includes:
1 x DFRobot Air Quality Monitor (PM 2.5 Formaldehyde Temperature & Humidity Sensor)
Quick specs
- Particle Counting Efficiency
- 50%@0.3μm, 98%@>=0.5μm
- Measurement Range
- 0~99℃
- Humidity Range
- 0~99%
- Response Time(s)
- <1s (single)
- Supply Voltage
- Typ: 5V Min: 4.5V Max: 5.5V
- Working Current (mA)
- ≤100mA



















