Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Microcontroller; operating temperature (°c) -40 to 125; interface I2C x 1,SPI x 1,UART x 1,Analog x 2,Digital x 2.

Key Highlights

  • Item Type: Microcontroller
  • Operating Temperature (°C): -40 to 125
  • Interface: I2C x 1,SPI x 1,UART x 1,Analog x 2,Digital x 2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeMicrocontroller
Charging Current200 to 600mA
Operating Temperature (°C)-40 to 125
InterfaceI2C x 1,SPI x 1,UART x 1,Analog x 2,Digital x 2
Length (mm)22
Width (mm)20.5
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The DFRobot Beetle CM-32U4 Microcontroller, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Microcontroller (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Charging Current: 200 to 600mA (check which plug or cable it needs)
  • Operating Temperature (°C): -40 to 125
  • Interface: I2C x 1,SPI x 1,UART x 1,Analog x 2,Digital x 2 (confirm your cable or board uses the same connector)
  • Length (mm): 22 (measure your mounting space before ordering)
  • Width (mm): 20.5 (measure your mounting space before ordering)
  • Bluetooth Version: Supports Bluetooth 5.1 dual mode function (check your phone or controller supports the same Bluetooth version for full range)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Beetle CM-32U4 is a micro Leonardo controller with an onboard charging chip. As an upgraded version of the DFRobot Beetle Board, this board is greatly optimized in integration and usability, which makes it well applicable to Arduino projects that require compact size and long service life. Just like the Beetle series, despite a mini body, it has powerful functionalities. On a size of only 22mm*20.5mm, Beetle CM-32U includes most commonly-used communication interfaces: 1×I2C, 1×SPI, 1×UART, 2×analog Interface, 2×digital interface, 2×GND reserved and 1×5V output, which are all designed as pin connector form, more intuitive and easy to use compared with the onboard pads of Beetle. Besides, Beetle CM-32U4 supports official Leonardo firmware, which means you can directly use it in Arduino IDE without extra download. It integrates the charging management function for Lithium battery. You can easily connect the battery to the board via pins, which could reduce project building difficulty, meanwhile, much smaller and safer. There are 3 power supply methods: USB power supply; Battery pack power supply on the BAT pin; 5V external power supply on the VIN pin, making this board more widely applicable to DIY projects, workshops, gift projects, E-Textiles wearable, and educational. And the features of rechargeable and diverse power supplies, to some extent, are equivalent to "uninterrupted power supply (UPS)".

Applications:

  1. DIY projects
  2. Workshops
  3. Gift projects
  4. E-Textiles wearable

Useful link:

For more information refer to the tutorial

Features:

  1. Rich functions
  2. Small size
  3. Greatly increase the service life

Package Includes:

1 x Beetle CM-32U4

2 x 8pin-2.54mm Pin Header

Quick specs

Item Type
Microcontroller
Charging Current
200 to 600mA
Operating Temperature (°C)
-40 to 125
Interface
I2C x 1,SPI x 1,UART x 1,Analog x 2,Digital x 2
Length (mm)
22
Width (mm)
20.5
See all specifications