
1 / 2 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Module; model no. / name Display Module; voltage rating (v) 3.3 to 5. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Item Type: Module
- Model No. / Name: Display Module
- Voltage Rating (V): 3.3 to 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Module |
|---|---|
| Model No. / Name | Display Module |
| Voltage Rating (V) | 3.3 to 5 |
| Pixel | 128 columns x 160 rows |
| Communication Mode | SPI |
| Operating Temperature (°C) | -10 to 60 |
| Display | 26 mm x 35 mm |
| Length (mm) | 55 |
| Width (mm) | 34 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Overview
The DFRobot Fermion 1.8" 128×160 IPS TFT LCD with MicroSD (Breakout), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Module
- Model No. / Name: Display Module (measured diagonally; compare with the space you have before ordering)
- Voltage Rating (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Pixel: 128 columns x 160 rows
- Communication Mode: SPI
- Operating Temperature (°C): -10 to 60
- Display: 26 mm x 35 mm (measured diagonally; compare with the space you have before ordering)
- Length (mm): 55 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Applications:
- Sensor monitoring and alarm
- Arduino temperature monitor
- Fan controller
Useful link:
For more information refer to the tutorialFeatures:
- 128x160 Resolution
- SPI (4-wire) communication
- Integrated with an SD card slot
Package Includes:
1 x Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)
1 x GDI Display Cable
1 x 10P Pin Connector
Quick specs
- Item Type
- Module
- Model No. / Name
- Display Module
- Voltage Rating (V)
- 3.3 to 5
- Pixel
- 128 columns x 160 rows
- Communication Mode
- SPI
- Operating Temperature (°C)
- -10 to 60


















