
1 / 3 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: sensing range ±2g, ±4g, ±8g, ±16g; length (mm) 20; width (mm) 13. Check that your power source supplies 2 to 3.6 before connecting it.
Key Highlights
- Sensing range: ±2g, ±4g, ±8g, ±16g
- Length (mm): 20
- Width (mm): 13
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 2 to 3.6 |
|---|---|
| Sensing range | ±2g, ±4g, ±8g, ±16g |
| Length (mm) | 20 |
| Width (mm) | 13 |
| Weight (g) | 03 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 5.5 × 2.5 cm |
Overview
The DFRobot Fermion: ADXL345 Digital Triaxial Acceleration Sensor (Breakout) (±16g), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 2 to 3.6 (match this to your power supply; too high a voltage can damage the part)
- Sensing range: ±2g, ±4g, ±8g, ±16g (quoted range is usually line-of-sight; walls and interference shorten it)
- Length (mm): 20 (measure your mounting space before ordering)
- Width (mm): 13 (measure your mounting space before ordering)
- Weight (g): 03 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 5.5 × 2.5 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Fermion: ADXL345 Digital Triaxial Acceleration Sensor (Breakout) is a compact and efficient 3-axis accelerometer designed for precise motion and tilt sensing. It supports both SPI and I2C interfaces and delivers 13-bit resolution measurements up to ±16g. Ideal for robotics, gaming, and portable devices, it includes features like tap/double tap detection, free-fall sensing, and motion detection. With ultra-low power consumption, a built-in FIFO buffer, and intelligent power modes, it enhances performance while minimizing processor load. This module is perfect for applications requiring accurate and responsive acceleration data in compact embedded systems. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- High-resolution 13-bit measurement up to ±16g
- SPI and I2C digital interfaces
- Tap and double-tap detection
- Free-fall and motion detection
- Ultra-low power consumption (40uA in measurement mode)
- Static and dynamic acceleration measurement
- Built-in 32-level FIFO buffer
- Compact form factor and breakout board design
Package Includes:
1 x DFRobot Fermion: ADXL345 Digital Triaxial Acceleration Sensor (Breakout) (±16g)
1 x Header Pin
Quick specs
- Operating Voltage (VDC)
- 2 to 3.6
- Sensing range
- ±2g, ±4g, ±8g, ±16g
- Length (mm)
- 20
- Width (mm)
- 13
- Weight (g)
- 03
- Shipping Weight
- 0.01 kg


















