
1 / 4 · Click to enlarge
AI Summary
A compact four-in-one sensor that measures temperature, humidity, pressure and VOCs for air quality projects. It works with both 3.3V and 5V controllers via I2C or SPI, making integration simple.
Key Highlights
- Four sensors in one: temperature, humidity, barometer and VOC
- Works with 3.3V and 5V controllers thanks to onboard regulator
- I2C interface with default address 0x76, plus SPI option
- Low power consumption: 5mA typical, 25mA during VOC measurement
- 2.54mm pitch pins and connectors for easy wiring
- Small 18 x 15.6mm breakout board
Ideal For
- Makers building indoor air quality monitors
- IoT developers adding environmental sensing
- Students learning about MEMS sensors
- Home automation enthusiasts
- Engineers prototyping wearable devices
Buying Tip
Check that your project can supply up to 25mA during VOC measurements, especially if you plan to run the sensor from a small battery.
Elecvora expert review
Our verdict
The DFRobot Fermion BME680 breakout is a well-designed module that simplifies adding comprehensive environmental sensing to any project. Its wide voltage compatibility and multiple interface options make it versatile, though the higher current during VOC measurement is worth noting.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four sensors in one compact board
- Works with 3.3V and 5V without extra components
- I2C and SPI interfaces available
- Low power consumption in normal operation
- Easy wiring with 2.54mm connectors
Cons
- VOC measurement draws 25mA, which may be high for some battery-powered designs
- SPI interface only supports 3.3V logic
- No cable included for connecting to a breadboard
Best for
Makers and engineers who need a reliable, easy-to-use environmental sensor for air quality and IoT projects.
Not ideal for
Projects that require long battery life with frequent VOC measurements or 5V SPI communication.
Specifications
| Operating Current (mA) | 5mA (25mA in VOC Measurement) |
|---|---|
| Communication Interface | I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V) |
| Default I2C Address | 0x76 |
| Measurement Range | -40℃~+85℃ |
| Humidity Range | 0-100%r.H. |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 3 × 1 cm |
What's in the box
- 1 x BME680 Environmental Sensor Module
- 1 x 2.54 Single Row 4PIN Connector
- 1 x 2.54 Single Row 6PIN Connector
Frequently Asked Questions
What is the default I2C address of the BME680 sensor?
Can I use this sensor with a 5V microcontroller?
What is included in the package?
How much current does the sensor draw?
What is the measurement range for temperature and humidity?
Do I need additional components to connect it to my board?
Overview
The DFRobot Fermion BME680 Environmental Sensor Breakout packs four environmental measurements into a single tiny board. It combines a temperature sensor, humidity sensor, barometer and volatile organic compounds (VOC) sensor using MEMS technology. This makes it a practical choice for anyone building an air quality monitor, a home automation system or an IoT device that needs to understand its surroundings.
DFRobot has designed this breakout for easy integration. It includes an onboard voltage regulator and an I2C level translator, so you can connect it directly to 3.3V or 5V microcontrollers without additional components. The board breaks out standard 2.54mm pitch pins, a female header and an SPI connector, giving you flexible wiring options.
Key Features
- Four-in-one sensing: temperature, humidity, barometric pressure and VOC in a single module.
- Wide voltage compatibility: works with both 3.3V and 5V controllers.
- Flexible interfaces: I2C (default address 0x76) or SPI for non-I2C ports (3.3V only).
- Low power: 5mA typical operating current, 25mA during VOC measurement.
- Compact size: 18 x 15.6mm breakout with easy-to-use connectors.
Specifications Explained
Operating current: The module draws about 5mA in normal operation and 25mA when the VOC sensor is active. This is low enough for battery-powered projects, but keep the higher VOC measurement current in mind when sizing your power supply.
Communication: The default I2C address is 0x76. I2C works with both 3.3V and 5V systems. If you use SPI, note that the non-I2C ports only support 3.3V logic.
Measurement range: The temperature range is -40°C to +85°C, and humidity covers 0 to 100% relative humidity. The barometer and VOC sensor provide additional environmental data. The IAQ (Indoor Air Quality) range is 0 to 500, where a higher value indicates worse air quality.
Compatibility and Requirements
This breakout is designed for microcontrollers and development boards that support I2C or SPI. It works with both 3.3V and 5V logic on I2C, while SPI is limited to 3.3V. No additional level shifting or voltage regulation is needed. You will need a host controller and connecting wires; the module itself is ready to use.
Typical Uses
- Indoor air quality monitoring
- Home automation and control
- IoT wearable devices
- Environmental data logging
- GPS enhancement (as mentioned by the manufacturer)
What's in the Box
- 1 x BME680 Environmental Sensor Module
- 1 x 2.54 Single Row 4PIN Connector
- 1 x 2.54 Single Row 6PIN Connector

Quick specs
- Operating Current (mA)
- 5mA (25mA in VOC Measurement)
- Communication Interface
- I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address
- 0x76
- Measurement Range
- -40℃~+85℃
- Humidity Range
- 0-100%r.H.
- Shipping Weight
- 0.01 kg


















