Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DFRobot Fermion module that measures VOC, temperature, humidity and barometric pressure from one sensor. It runs on 3.3 to 5.0 V with I2C or SPI output, making multi-parameter environmental sensing easy to add to a project.

Key Highlights

  • Measures VOC, temperature, humidity and barometric pressure in one module
  • Dedicated heating layer reduces ambient temperature interference in VOC readings
  • Temperature accuracy of ±0.5°C, humidity ±3% and pressure ±0.6 hPa
  • Supports both I2C and SPI communication for flexible integration
  • Wide 3.3 to 5.0 V supply range suits many microcontroller boards
  • Compact 18 x 15 mm board weighing only 2 g

Ideal For

  • Makers building indoor air quality monitors
  • Students learning about VOC and environmental sensing
  • IoT developers adding multi-parameter sensing
  • Engineers prototyping weather or gas detection devices
  • Educators demonstrating AI gas analysis workflows

Buying Tip

Check that your chosen library and board support I2C or SPI and that your supply stays within 3.3 to 5.0 V before wiring the module.

Elecvora expert review

Our verdict

A tidy, well-integrated module that puts four environmental measurements on one small board with flexible I2C or SPI output. The heater layer and AI gas analysis support make it more than a basic weather sensor.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four measurements from one compact board
  • I2C and SPI support for flexible wiring
  • Wide 3.3 to 5.0 V supply range
  • Heating layer helps VOC measurement stability
  • Supports AI-Studio and BSEC2-Arduino workflows

Cons

  • Requires a host microcontroller to operate
  • VOC readings need warm-up time to stabilise
  • AI gas profiles require additional tooling and setup

Best for

Makers and developers building multi-parameter environmental monitors

Not ideal for

Users wanting a standalone display-ready instrument

Specifications

Voltage Rating3.3 - 5.0
Length (mm)18
Width (mm)15
Weight (g)02
Shipping Weight0.006 kg
Shipping Dimensions7 × 6 × 3 cm

What's in the box

  • 1 x Fermion I2C BME688 Environmental Sensor
  • 1 x XH2.54-10pin Header

Frequently Asked Questions

What does the BME688 sensor measure?
It measures volatile organic compounds, temperature, humidity and barometric pressure from a single module.
What voltage does the module need?
The module is rated for a 3.3 to 5.0 V supply.
Which interfaces are supported?
It supports both I2C and SPI communication.
What is included in the package?
You receive one Fermion I2C BME688 Environmental Sensor and one XH2.54-10pin header.
Can I use it for AI gas analysis?
Yes, it is compatible with Bosch AI-Studio and BSEC2-Arduino for custom gas profiles.
How accurate are the readings?
Temperature is rated to ±0.5°C, humidity to ±3% and pressure to ±0.6 hPa.

Overview

The DFRobot Fermion BME688 is a small environmental sensor module that combines four measurements in a single board: volatile organic compounds (VOCs), temperature, humidity and barometric pressure. It is designed for makers and product developers who want reliable multi-parameter sensing without building a circuit around a bare sensor IC.

The board measures approximately 18 mm by 15 mm and weighs just 2 g, so it can be embedded into compact enclosures, wearable prototypes and handheld instruments. Power comes from a 3.3 to 5.0 V supply, and data is available over I2C or SPI.

Key Features

  • Four measurements, one module: VOC, temperature, humidity and pressure readings from a single integrated MEMS device.
  • Heating layer for VOC work: a dedicated heater helps minimise ambient temperature interference when detecting volatile organic compounds.
  • AI-driven gas analysis support: the sensor is compatible with Bosch AI-Studio and BSEC2-Arduino for building custom gas profiles.
  • Flexible interfacing: choose I2C or SPI depending on your project wiring and library needs.
  • Compact footprint: the 18 x 15 mm board and 2 g weight keep integration simple.

Specifications Explained

The stated accuracy figures tell you what to expect in practice. Temperature is rated to ±0.5°C, humidity to ±3% and pressure to ±0.6 hPa, which is suitable for indoor monitoring, weather logging and general environmental tracking rather than laboratory reference work.

The 3.3 to 5.0 V voltage rating means the module can share a supply with many common development boards without an extra regulator. The 18 mm length, 15 mm width and 2 g weight make it easy to mount in tight spaces. Shipping weight is listed at 0.006 kg and shipping dimensions at 7 x 6 x 3 cm.

Compatibility and Requirements

The module communicates over I2C or SPI and requires a host microcontroller or development board to read its data. For AI-based gas analysis, Bosch AI-Studio and BSEC2-Arduino are the referenced tools. A suitable 3.3 to 5.0 V power source is required.

Typical Uses

  • Indoor air quality monitoring in homes, offices and classrooms
  • Weather stations needing temperature, humidity and pressure data
  • IoT devices that report environmental conditions
  • Gas leak detection experiments in industrial or lab settings
  • Educational projects exploring VOC sensing and AI gas profiles

What's in the Box

Package contents: 1 x Fermion I2C BME688 Environmental Sensor and 1 x XH2.54-10pin Header.

Quick specs

Voltage Rating
3.3 - 5.0
Length (mm)
18
Width (mm)
15
Weight (g)
02
Shipping Weight
0.006 kg
Shipping Dimensions
7 × 6 × 3 cm
See all specifications