Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A thumbnail-sized dual H-bridge motor driver that controls two DC brush motors up to 1.5A each. Its 18×13mm footprint and 3.3–10V load range make it ideal for space-constrained robotics projects.

Key Highlights

  • Drives two DC brush motors independently at up to 1.5A each
  • Ultra-compact 18 × 13mm footprint for space-limited builds
  • Wide 3.3–10V load supply range
  • 3.3–5V logic input compatible with common microcontrollers
  • PWM speed control for smooth motor regulation
  • Includes two 6-pin XH-2.54 headers for wiring

Ideal For

  • Makers building small differential-drive robots
  • Students learning motor control with microcontrollers
  • Engineers prototyping compact motorised mechanisms
  • Hobbyists needing a tiny dual motor driver
  • Educators creating space-constrained robotics kits

Buying Tip

Check that your motors draw no more than 1.5A continuous each and that your supply stays within 3.3–10V to avoid overheating or damage.

Elecvora expert review

Our verdict

The DFRobot Fermion HR8833 delivers dual motor control in an exceptionally small package, making it a smart choice for space-critical robotics. It handles typical small DC motors well, though users should respect the 1.5A per-channel limit and provide adequate cooling under heavy loads.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact 18 × 13mm size
  • Dual channels with independent control
  • Wide 3.3–10V motor supply range
  • PWM speed control supported
  • Includes headers for easy wiring

Cons

  • Requires separate logic and motor power supplies
  • Needs soldering to attach headers or wires
  • Limited to 1.5A continuous per channel

Best for

Compact robotics projects with small brushed DC motors

Not ideal for

High-current motors or applications requiring more than 1.5A per channel

Specifications

Item TypeAccessory
Length (mm)18
Width (mm)13
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

What's in the box

  • 1 × Dual 1.5A Motor Driver – HR8833
  • 2 × 6-pin XH-2.54 standard pin headers

Frequently Asked Questions

What is the maximum current this driver can handle per motor?
Each channel can supply up to 1.5A continuous current to a DC brush motor.
What input voltage does the logic side require?
The logic input (VCC) operates from 3.3V to 5V, compatible with most microcontrollers.
Can I control motor speed with this module?
Yes, it supports PWM speed control, allowing you to adjust motor speed by varying the duty cycle of the input signal.
What motors can I use with this driver?
It is designed for brushed DC motors with a voltage rating within 3.3–10V and a continuous current draw of up to 1.5A per channel.
Does the package include any cables or connectors?
The package includes the motor driver module and two 6-pin XH-2.54 standard pin headers. No cables are included.
How do I prevent overheating?
Ensure the module has adequate airflow and avoid exceeding the 1.5A continuous current per channel. If operating near the limits, consider adding a small heatsink.

Overview

The DFRobot Fermion HR8833 is a dual H-bridge DC motor driver designed for projects where every millimetre counts. Based on the HR8833 chip, it packs two independent motor channels into a module measuring just 18 × 13mm, roughly the size of a thumbnail. Each channel can deliver up to 1.5A continuous current to a brushed DC motor, with a load supply voltage range of 3.3–10V. Logic input operates from 3.3–5V, so it interfaces easily with popular microcontroller boards. PWM speed control is supported for precise motor regulation.

Key Features

  • Dual motor channels: Drive two DC brush motors independently, each up to 1.5A continuous.
  • Ultra-compact size: 18 × 13mm footprint fits into tight enclosures and small robots.
  • Flexible voltage range: Load supply from 3.3V to 10V; logic input from 3.3V to 5V.
  • PWM speed control: Adjust motor speed smoothly using pulse-width modulation.
  • Power dissipation: Handles up to 25W at 75°C case temperature.
  • Wide operating temperature: Reliable from -20°C to 85°C.
  • Easy wiring: Includes two 6-pin XH-2.54 standard headers.

Specifications Explained

The 1.5A continuous current per channel sets the size of motor you can drive: small to medium brushed DC motors used in miniature robots and mechanisms. The 3.3–10V load supply means you can power motors from a range of batteries or regulated supplies, but never exceed 10V. The 3.3–5V logic input matches the IO levels of most microcontrollers, so no level shifting is needed. PWM support lets you control speed by varying the duty cycle of the input signal. The 25W maximum power dissipation at 75°C indicates how much heat the module can handle; ensure adequate airflow or a heatsink if running near the limits. The operating temperature range of -20 to 85°C covers typical indoor and outdoor environments.

Compatibility and Requirements

This module requires a separate motor power supply (3.3–10V) and a logic supply (3.3–5V). It is controlled via standard PWM and direction signals from a microcontroller. The included 6-pin XH-2.54 headers allow you to solder wires or use compatible connectors. No additional components are included beyond the headers.

Typical Uses

  • Small differential-drive robots and rovers
  • Miniature motorised mechanisms and grippers
  • Educational robotics projects
  • Portable or battery-powered gadgets with DC motors
  • Prototyping where space is limited

What's in the Box

  • 1 × Dual 1.5A Motor Driver – HR8833
  • 2 × 6-pin XH-2.54 standard pin headers

Quick specs

Item Type
Accessory
Length (mm)
18
Width (mm)
13
Bluetooth Version
Supports Bluetooth 5.1 dual mode function
Shipping Weight
0.015 kg
Shipping Dimensions
9 × 7 × 3 cm
See all specifications