Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact breakout that combines the MAX30102 optical sensor with an onboard microcontroller running heart rate and oximetry algorithms. It outputs calculated pulse and blood oxygen values directly over I2C or UART, so your main controller stays free.

Key Highlights

  • MAX30102 optical sensing with onboard heart rate and oximetry algorithm
  • Outputs calculated values directly over I2C or UART
  • 3.3V supply with working current under 15mA
  • Fixed I2C address 0x57 for straightforward bus wiring
  • Compact 18 x 22mm board for finger-worn and handheld builds
  • PC host software included for direct data reading

Ideal For

  • Makers building heart rate and blood oxygen projects
  • Students learning optical biosensing with I2C or UART
  • Developers prototyping wearable health monitors
  • Engineers who want calculated values without host-side algorithms
  • Hobbyists logging pulse data to a PC

Buying Tip

Confirm your host board can supply a clean 3.3V rail and that nothing else on your I2C bus already uses address 0x57 before wiring it up.

Elecvora expert review

Our verdict

A tidy, focused breakout that removes the algorithm work from your main controller and gives you usable heart rate and blood oxygen values over a simple bus. It suits prototyping and learning well, provided you respect the 3.3V supply and steady finger placement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Onboard algorithm means no host-side signal processing
  • I2C and UART output options
  • Low current draw under 15mA
  • Compact 18 x 22mm board
  • PC host software for quick testing

Cons

  • Fixed I2C address 0x57 can clash with other devices
  • Readings are sensitive to finger pressure
  • Not a medical instrument, so accuracy is for projects only

Best for

Makers and students building heart rate and blood oxygen monitoring projects

Not ideal for

Clinical or diagnostic measurement

Specifications

Power Supply Voltage (V)3.3V
Working Current (mA)<15mA
Communication ModeI2C/UART
I2C Address0x57
Operating Temperature (°C)-40℃~85℃
Dimensions (L x W x H) mm18 x 22mm/0.71 x 0.87"
Shipping Weight0.04 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x DFRobot Fermion MAX30102 Heart Rate and Oximeter Sensor (Breakout)

Frequently Asked Questions

What does this sensor actually output?
It outputs calculated heart rate and oximetry values rather than raw optical samples, because an onboard microcontroller runs the algorithms. The values are sent over I2C or UART.
What voltage does it need?
The board is specified for a 3.3V supply and draws less than 15mA while working. Use a regulated 3.3V rail rather than a higher voltage.
Which I2C address does it use?
It uses the fixed I2C address 0x57. Check your bus for other devices on the same address before connecting it.
Can I read data on a computer?
Yes. DFRobot provides host computer software that lets you read sensor data directly on a PC for testing and evaluation.
Does finger position matter?
The sensor can be worn in either direction on the finger. However, pressing hard changes the pressure and can affect output, so fix it gently and steadily against the fingertip.
Is this a medical device?
No. It is a project sensor and is not a professional medical instrument, so it should not be used as an aid in diagnosis or treatment.

Overview

The DFRobot Fermion MAX30102 Heart Rate and Oximeter Sensor is a small breakout that handles the difficult part of optical vital-sign measurement for you. The MAX30102 chip collects photoplethysmography (PPG) data from a fingertip, and an onboard microcontroller converts that raw signal into heart rate and oximetry values. Those finished numbers are then sent to your project over I2C or UART.

Because the calculation happens on the board, your main controller is not tied up running filters and algorithms. You read a value, display it, log it or act on it. The board is aimed at makers, students and developers building monitoring projects rather than at clinical use.

Key Features

  • MAX30102 optical sensor for PPG-based pulse and blood oxygen measurement
  • Integrated microcontroller running heart rate and oximetry algorithms
  • Direct data output over I2C or UART, no host-side signal processing required
  • Host computer software provided for reading data on a PC
  • Compact 18 x 22mm board footprint
  • Wide operating temperature range of -40 to 85 degrees Celsius

Specifications Explained

Power and current

The board is designed for a 3.3V supply and draws less than 15mA while working. That low current makes it suitable for small, portable builds where power budget matters.

Communication

Two interfaces are available. I2C uses the fixed address 0x57, so check your bus for conflicts before adding other devices. UART gives a simple serial alternative when I2C is already busy or when you want a direct link to a serial monitor.

Size and environment

At roughly 18 x 22mm, the board fits finger-worn holders and compact enclosures. The -40 to 85 degrees Celsius operating range covers normal indoor and many outdoor project conditions.

Compatibility and Requirements

You need a 3.3V supply and a host device that supports I2C or UART. The I2C address is fixed at 0x57. A PC can be used with the supplied host software to read data during testing. No other compatibility details are specified.

Typical Uses

  • Heart rate and blood oxygen learning projects
  • Home heart rate and oximeter builds
  • Long-term heart rate and blood oxygen monitoring experiments
  • Wearable and handheld sensor prototypes

Practical Notes

Finger pressure affects the optical reading, so hold the sensor steady against the finger rather than pressing hard. The sensor can be worn in either direction on the finger. It is not a professional medical instrument and must not be used as an aid in diagnosis or treatment.

What's in the Box

  • 1 x DFRobot Fermion MAX30102 Heart Rate and Oximeter Sensor (Breakout)

Quick specs

Power Supply Voltage (V)
3.3V
Working Current (mA)
<15mA
Communication Mode
I2C/UART
I2C Address
0x57
Operating Temperature (°C)
-40℃~85℃
Dimensions (L x W x H) mm
18 x 22mm/0.71 x 0.87"
See all specifications