Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MEMS gas sensor breakout that detects CO, CH4, H2, NH3 and other gases with an analog output. It runs on 5V and includes sample code with concentration formulas for quick integration.

Key Highlights

  • Detects multiple harmful gases including CO, CH4, H2, H2S, NH3
  • Analog output for easy reading with microcontroller ADCs
  • Compact 12mm x 16mm board with mounting holes
  • Operates from 4.9V to 5.1V, 0.45W power dissipation
  • Wide operating temperature range of -30°C to 85°C
  • Sample code provides gas concentration conversion formulas

Ideal For

  • Makers building DIY gas leak detectors
  • Students learning about environmental sensors
  • Engineers prototyping air quality monitors
  • Hobbyists creating smart home safety systems
  • Educators demonstrating sensor technology

Buying Tip

Remember that this sensor requires a 5V supply and provides an analog output, so ensure your microcontroller has a 5V-tolerant analog input or use a voltage divider.

Elecvora expert review

Our verdict

The DFRobot Fermion MiCS-5524 breakout is a practical choice for detecting multiple gases in DIY and educational projects. Its analog output and compact size make it easy to integrate, though it requires a 5V supply and careful calibration.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Detects a wide range of harmful gases
  • Compact board with mounting holes
  • Sample code with concentration formulas
  • Wide operating temperature range

Cons

  • Requires 5V power, not 3.3V
  • Analog output needs an ADC
  • Requires warm-up and calibration for accurate readings

Best for

Makers and students building gas detection projects

Not ideal for

Precision industrial gas measurement without additional calibration

Specifications

Operating Voltage (V)4.9 to 5.1
Power Dissipation (W)0.45 W
Signal OutputAnalog quantity
Operating Temperature (°C)-30 ~ 85 °C
Operating humidity5 ~ 95%RH (No condensation)
Storage Temperature (°C)-40 ~ 85 °C
Life Cycle>2 years (in the air)
Circuit board size12mm×16mm
Mounting Hole Diameter (mm)Inner diameter 2mm/outer diameter 4mm
Shipping Weight0.006 kg
Shipping Dimensions6 × 5.5 × 2.5 cm

What's in the box

  • 1 x DFRobot Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)

Frequently Asked Questions

What gases can this sensor detect?
The MiCS-5524 sensor can detect carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydrogen (H2), hydrogen sulfide (H2S), and ammonia (NH3).
What is the power requirement for this sensor?
The sensor operates on 4.9V to 5.1V DC and dissipates 0.45W. It requires a 5V supply for the heater; do not power it from 3.3V.
What output does the sensor provide?
The sensor provides an analog voltage output that varies with gas concentration. You can read it with any microcontroller that has an analog-to-digital converter.
Is sample code available?
Yes, DFRobot provides sample code that includes concentration conversion formulas for various gases, which you can use to interpret the sensor's output.
What is included in the package?
The package includes one DFRobot Fermion MEMS Gas Sensor MiCS-5524 (Breakout) board. No other components or cables are included.
How should I care for the sensor?
Store the sensor in a dry environment between -40°C and 85°C. Avoid exposure to high concentrations of silicone vapors, as they can permanently damage the sensor. The sensor has a life cycle of over 2 years in air.

Overview

The DFRobot Fermion MEMS Gas Sensor MiCS-5524 (Breakout) is a ready-to-use sensor board for detecting a variety of harmful gases. It leverages MEMS technology to sense carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydrogen (H2), hydrogen sulfide (H2S), and ammonia (NH3). The board outputs an analog voltage that corresponds to gas concentration, allowing you to read it with any microcontroller that has an analog-to-digital converter. DFRobot provides sample code that includes formulas to convert the analog reading into concentration values for different gases, simplifying calibration and testing. The compact 12mm by 16mm board features mounting holes for secure installation, and its wide operating temperature and humidity ranges make it suitable for various environments.

Key Features

  • Multi-gas detection: Senses CO, CH4, C2H5OH, C3H8, C4H10, H2, H2S, and NH3.
  • Analog output: Provides a continuous voltage signal proportional to gas concentration.
  • MEMS technology: Enables a small footprint and low power consumption of 0.45W.
  • Wide operating conditions: Works from -30°C to 85°C and 5% to 95%RH (no condensation).
  • Compact size: 12mm x 16mm board with 2mm inner diameter mounting holes.
  • Sample code: Includes concentration conversion formulas for multiple gases.

Specifications Explained

The operating voltage of 4.9V to 5.1V means the sensor is designed for 5V systems, such as Arduino boards and many other microcontrollers. The power dissipation of 0.45W is modest, allowing continuous operation without significant heating. The analog output is a voltage that varies with gas concentration; you will need an ADC with sufficient resolution to read it accurately. The operating temperature range of -30°C to 85°C covers most indoor and outdoor applications, while the humidity range of 5% to 95%RH (non-condensing) suits typical environmental monitoring. The sensor's life cycle is stated as greater than 2 years in air, which is typical for metal oxide gas sensors. The board size of 12mm by 16mm and mounting holes with 2mm inner diameter and 4mm outer diameter make it easy to mount in enclosures or on custom PCBs.

Compatibility and Requirements

The sensor requires a 5V power supply (4.9V to 5.1V). It outputs an analog signal, so your microcontroller must have an analog input. The sensor is compatible with master controllers operating at 3.3V to 5.5V logic, as long as the analog voltage is within the ADC's range. No additional components are required for basic operation, but you may need to calibrate the sensor for your specific application using the provided sample code. Note that the sensor is not compatible with 3.3V power supplies; it needs 5V for the heater.

Typical Uses

  • Gas leak detection in homes and workshops
  • Air quality monitoring and environmental sensing
  • Gas safety equipment and alarms
  • Educational projects and sensor experimentation
  • DIY environmental data loggers

What's in the Box

1 x DFRobot Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)

Quick specs

Operating Voltage (V)
4.9 to 5.1
Power Dissipation (W)
0.45 W
Signal Output
Analog quantity
Operating Temperature (°C)
-30 ~ 85 °C
Operating humidity
5 ~ 95%RH (No condensation)
Storage Temperature (°C)
-40 ~ 85 °C
See all specifications