Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MEMS hydrogen sulfide sensor breakout that detects 0.5-50ppm H2S with analog output and low power draw. Great for adding qualitative gas sensing to microcontroller projects.

Key Highlights

  • Detects hydrogen sulfide (H2S) and benzene from 0.5 to 50 ppm
  • Compact 13x13 mm MEMS sensor on a breakout board
  • Low power consumption: under 20 mA at 3.3-5V
  • Fast response and recovery, short preheating time
  • Analog voltage output for easy microcontroller interfacing
  • Long life expectancy of 5 years or more in air

Ideal For

  • Makers building indoor air quality monitors
  • Engineers developing odor detection systems for waste management
  • Students learning about MEMS gas sensors
  • DIY enthusiasts creating sewer or toilet ventilation alerts
  • Product designers needing a compact H2S sensing module

Buying Tip

Remember to remove the protective film before use and avoid exposing the sensor to silicone vapors or high concentrations of corrosive gases.

Elecvora expert review

Our verdict

This sensor offers a compact, low-power solution for qualitative H2S detection in DIY and educational projects. Its simple analog interface and wide compatibility make it easy to integrate, though it is not intended for precise measurements or safety-critical systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small size and low power consumption
  • Easy analog interface with 3.3V and 5V systems
  • Fast response and recovery
  • Long expected lifespan

Cons

  • Provides qualitative measurements only, not calibrated ppm values
  • Sensitive to silicone vapors and corrosive gases
  • Not for use in personal safety systems

Best for

Hobbyists and educators building qualitative gas detection projects

Not ideal for

Safety-critical or calibrated measurement applications

Specifications

Item TypeGas Sensor
Operating Voltage (V)3.3 to 5
Detecting Range0.5-50ppm
Detection GasHydrogen Sulfide (H2S), Benzene
Max. Operating Current (A)20
Signal OutputAnalog Voltage
Operating Temperature (°C)-10~50℃
Operating humidity15-90%RH (non-condensing)
Life Cycle≥5 years (in air)
Length (mm)13
Width (mm)13
Weight (g)1 (approx)
Shipping Weight0.012 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • 1 x DFRobot Fermion MEMS Hydrogen Sulfide H2S Gas Detection Sensor Breakout (0.5-50ppm)
  • 1 x 2.54mm pitch header strip

Frequently Asked Questions

What gases can this sensor detect?
It detects hydrogen sulfide (H2S) and benzene, with a specified range of 0.5 to 50 ppm for H2S.
What is the output type?
The sensor provides an analog voltage output that varies with gas concentration.
What power supply does it need?
It operates from 3.3V to 5V DC and draws a maximum of 20 mA.
Is this sensor calibrated for quantitative measurements?
No, it is designed for qualitative detection. For quantitative measurements, consider a factory-calibrated electrochemical sensor.
What is included in the package?
The package includes one sensor breakout board and a 2.54mm pitch header strip.
How should I care for the sensor?
Avoid exposure to silicone vapors, high concentrations of corrosive gases, alkalis, and water. Store in a clean, dry environment and preheat for 24 hours after long periods of non-use.

Overview

The DFRobot Fermion MEMS H2S Gas Sensor Breakout brings micro-electromechanical system technology to hydrogen sulfide detection. At its heart is a tiny 13x13 mm sensing element that responds to H2S and benzene concentrations between 0.5 and 50 ppm. The breakout board provides an analog voltage output that varies with gas concentration, so you can read it with any microcontroller that has an ADC. Operating from 3.3V to 5V and drawing less than 20 mA, it suits battery-powered and portable projects. The sensor is designed for qualitative measurements, making it ideal for indicating the presence and relative level of hydrogen sulfide in applications such as toilet ventilation, sewer monitoring, and garbage station odor detection.

Key Features

  • MEMS sensing element: Advanced micro-electromechanical system construction yields a compact size, low power use, and minimal heat generation.
  • Wide detection range: Senses hydrogen sulfide from 0.5 ppm up to 50 ppm, plus benzene.
  • Fast response and recovery: Short preheating time and quick signal recovery help with real-time monitoring.
  • Simple interface: Analog voltage output connects directly to an ADC pin on most development boards.
  • Long service life: Rated for at least 5 years in air under normal conditions.

Specifications Explained

Operating voltage (3.3-5V): Works with both 3.3V and 5V logic systems, so it is compatible with a wide range of microcontrollers. Detection range (0.5-50 ppm): The sensor can indicate H2S concentrations from 0.5 to 50 parts per million. Current draw (max 20 mA): Low power consumption makes it suitable for continuous operation in battery-powered devices. Analog output: The output is an analog voltage that changes with gas concentration; you will need an ADC to read it. Operating conditions (-10 to 50°C, 15-90% RH non-condensing): Suitable for indoor and sheltered outdoor use, but avoid condensation and extreme environments. Dimensions (13x13 mm): The small footprint allows easy integration into tight enclosures.

Compatibility and Requirements

The breakout requires a 3.3V to 5V DC power supply and a microcontroller with an analog input to read the sensor output. No specific libraries or drivers are needed—just connect power and read the analog voltage. Note that this sensor is for qualitative measurements only; for calibrated quantitative readings, consider a factory-calibrated electrochemical sensor. Ensure the protective film is removed before use.

Typical Uses

  • Hydrogen sulfide detection in toilets and bathrooms
  • Sewer and wastewater odor monitoring
  • Garbage station and waste management odor detection
  • Educational projects and gas sensing experiments
  • DIY environmental monitoring devices

What's in the Box

  • 1 x DFRobot Fermion MEMS Hydrogen Sulfide H2S Gas Detection Sensor Breakout (0.5-50ppm)
  • 1 x 2.54mm pitch header strip (unsoldered)

Quick specs

Item Type
Gas Sensor
Operating Voltage (V)
3.3 to 5
Detecting Range
0.5-50ppm
Detection Gas
Hydrogen Sulfide (H2S), Benzene
Max. Operating Current (A)
20
Signal Output
Analog Voltage
See all specifications