Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5; detection gas CH4, C3H8; signal output Analog Voltage. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3 to 5
  • Detection Gas: CH4, C3H8
  • Signal Output: Analog Voltage

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3 to 5
Detection GasCH4, C3H8
Signal OutputAnalog Voltage
Operating Temperature (°C)-10~50℃
Operating humidity15-90%RH (non-condensing)
Life Cycle≥5 years (in air)
Length (mm)13
Width (mm)13
Weight (g)1 (approx)
Shipping Weight0.012 kg
Shipping Dimensions6 × 6 × 3 cm

Overview

The DFRobot Fermion MEMS Methane Gas Sensor (1–10000 ppm), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Detection Gas: CH4, C3H8
  • Signal Output: Analog Voltage (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -10~50℃
  • Operating humidity: 15-90%RH (non-condensing)
  • Life Cycle: ≥5 years (in air)
  • Length (mm): 13 (measure your mounting space before ordering)
  • Width (mm): 13 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is DFRobot Fermion MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm). Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure methane gas concentration and is suitable for combustible gas leakage monitoring devices, gas leak detectors, fire/safety detection systems and other applications.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.

 

Applications:
  • Environmental monitoring: detect the presence of methane emissions or leaks from natural or anthropogenic sources.
  • Indoor air quality: measure the concentration of methane in the indoor air and control the ventilation or alarm systems accordingly.
  • Industrial safety: detect any leaks or spills of methane and warn the workers or the managers to take preventive measures.
  • Fire detection: identify any abnormal increase of methane in the air and trigger the fire alarm or sprinkler system.
  • Health applications: measure the amount of methane in the breath, methane can be produced by some bacteria in the human gut or some metabolic disorders.
 

Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).

 

Precautions for use:

  • Kindly remove the protective film before usage.
  • To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
  • Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
  • Prevent contamination from alkalis, alkali metal salts, and halogens.
  • Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
  • Avoid contact with water, condensation, and freezing.
  • Minimize excessive vibration, impact, and dropping.
  • Please refrain from employing this module in systems that involve personal safety concerns.
  • For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

 

For more info., click below.


Features:

  1. Easy to use.
  2. Compact size, measuring only 13*13*2.5mm
  3. Low power consumption, operating current <20mA
  4. High sensitivity and rapid response recovery
  5. Advanced MEMS technology
  6. Gas detected: CH4, C3H8, etc.
  7. Sensitivity: R0(in air)/Rs(in 5000ppm CH4) ≥ 2
  8. Lifespan: ≥5 years (in air)
  9. Good quality product

Package Includes:

1 x DFRobot Fermion MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm)

1 x 2.54mm pitch header pin

Quick specs

Operating Voltage (V)
3.3 to 5
Detection Gas
CH4, C3H8
Signal Output
Analog Voltage
Operating Temperature (°C)
-10~50℃
Operating humidity
15-90%RH (non-condensing)
Life Cycle
≥5 years (in air)
See all specifications